20x20x240 cm Polyurethane Decorative Pilaster Column
Technical Specifications
| Material | Polyurethane decorative product |
|---|---|
| Surface | Decorative, paintable surface |
| Color | Paintable; current color before application not specified. |
| Density | 150-220 kg/m³ |
| Water Absorption | below 1% |
| Dimensional Stability Test | -20 °C / +70 °C |
| Fire Class | B2 (DIN 4102-1) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 20 cm |
| Dimensions | 200 × 200 × 2400 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Pilaster Panel Columns)
The P5020W Pilaster Column is a decorative architectural element from the pilaster panel column range, designed to create a classical column effect on walls and facades. Measuring 20x20x240 cm, it provides balanced proportions for tall walls and areas requiring a strong vertical architectural accent. The product should be used as a decorative covering applied to an existing surface, not as a structural column.
The P5020W Pilaster Column is made from rigid polyurethane with a closed-cell structure. Its density is 150-220 kg/m³, making it lighter to install than alternatives such as plaster and solid wood. The product is assessed within the dimensional stability test range -20 °C / +70 °C, with water absorption below 1%. Installation must nevertheless account for the product's own weight and the loads created by its fixings.
The pilaster column form creates architectural continuity around a column with a vertical profile positioned close to the wall. Its 20 cm width and 20 cm depth add a defined vertical line to entrances, halls and facade designs without unnecessarily reducing passage space. The paintable decorative surface can be matched to the existing colour palette and finished with water-based or synthetic paint for classical, contemporary or commercial designs.
The P5020W Pilaster Column can be used for wall division in living rooms and entrance halls, as a vertical accent around staircases, and to create a decorative column appearance at hotel lobbies and restaurant entrances. Outdoors, it can be applied at the entrances of villas, homes, hotels and commercial buildings. UV-resistant paint is required for facade applications, and joints and screw points must be sealed with exterior-grade filler. The product is non-structural and must not replace structural columns.
Before installation, the surface must be clean, dry, sound and level. Cuts are prepared with 45° mitre joints; the product is installed with polyurethane (PU) mounting adhesive and must also be mechanically fixed with screws. Joints are filled, smoothed with 180-220 grit sandpaper, then finished with primer and two coats of paint. The factory primer prepares the surface for painting; however, paint manufacturers may not provide a warranty for applications made without using their own primer. The choice of additional primer is the customer's responsibility. Polure does not provide warranties for paints used and accepts no responsibility for the painting application.
- The P5020W Pilaster Column can be used to add a vertical architectural accent to plain wall surfaces and to provide decorative cladding around existing columns
- Its 240 cm height creates balanced proportions in tall-ceilinged living rooms, entrance halls and areas around staircases
- The 20x20 cm section is suitable for projects that require a column effect without excessively narrowing the passage area
- In homes, it can be used on living room walls, in entrance halls, dining areas and bedrooms as part of a classical panel arrangement
- It can also define wall sections in hotel lobbies, restaurant entrances, shops and office reception areas
- Outdoors, it can be installed around existing concrete or steel columns at the entrances of villas, homes and commercial buildings as decorative cladding
- UV-resistant paint should be used for facade applications, and joints and screw heads must be sealed with exterior-grade filler
- The column element does not carry structural loads and serves only as decorative cladding
- Before installation, the surface must be clean, dry, sound and level
- After checking the Pilaster Column dimensions and joint locations, the required cuts are prepared with 45° mitre joints
- Polyurethane (PU) mounting adhesive is applied to the back and contact surfaces of the product; silicone adhesive must not be used
- After positioning the Pilaster Column on the surface, it is mechanically secured with screws and the fixing points are sealed
- For wide or specially sectioned applications, the fixing arrangement must be determined according to the product's own weight and the project conditions
- Joints are filled with suitable filler and smoothed with 180-220 grit sandpaper
- The factory primer prepares the surface for painting; the use of additional primer depends on the paint system and the customer's preference
- The final finish consists of a suitable primer and two coats of paint
- The surface of the P5020W Pilaster Column should be cleaned with a soft, slightly damp cloth
- Abrasive cleaning products, stiff brushes and equipment that may scratch the surface should not be used
- For exterior applications, the maintenance interval depends on exposure to sunlight and rain, as well as the selected paint system
- Unpainted polyurethane may yellow under UV exposure, so UV-resistant paint is required outdoors
- If impact or surface damage occurs, the affected area can be filled, smoothed with 180-220 grit sandpaper and repainted
Can the P5020W Pilaster Column be used outdoors?
Yes, the P5020W Pilaster Column can be used outdoors as decorative cladding. It is suitable for improving the appearance of existing columns or wall sections at the entrances of villas, homes, hotels and commercial buildings. It must not be left unpainted outdoors, and UV-resistant paint must be used. Joints and screw points must be sealed with exterior-grade filler. The product does not replace a structural column and must not be used to carry loads. Before installation, the condition of the surface, climate conditions and fixing method should be assessed.
How is the Pilaster Column installed and painted?
The installation surface must be clean, dry, sound and level. Cuts are prepared with 45° mitre joints; the product is installed with polyurethane (PU) mounting adhesive and mechanically fixed with screws. Silicone must not be used. Joints are filled and smoothed with 180-220 grit sandpaper. The factory primer prepares the surface for painting, but the paint manufacturer's application instructions should still be checked. The final finish can be completed with a suitable primer and two coats of water-based or synthetic paint. The choice of additional primer is the customer's responsibility.
How durable is the P5020W Pilaster Column and how much does it weigh?
The P5020W Pilaster Column is made from rigid, closed-cell polyurethane with a density of 150-220 kg/m³. Its net weight may vary according to the section and production details, so no fixed kilogram value can be stated here. The material retains its form, and its water absorption is below 1%. Service life depends on installation quality, the paint system and exposure to sunlight and outdoor conditions. Damaged surfaces can be repaired with filler, sanding and paint.
What advantages does a polyurethane pilaster column offer over plaster or wood?
A rigid polyurethane pilaster column is a lighter and more impact-resistant decorative cladding option than plaster. Compared with wood, its closed-cell structure provides greater resistance to moisture and decay. Its crisp profile lines and decorative surface create a consistent appearance in architectural applications. The product can be filled, sanded and painted. However, a pilaster column is non-structural and must not be used in place of a concrete, steel or existing structural column. The adhesive and required mechanical fixing must be considered together during installation.
Which interior spaces are suitable for the P5020W Pilaster Column?
The P5020W Pilaster Column can be used in living rooms, entrance halls, around staircases, dining areas, bedrooms, hotel lobbies, restaurants and office reception areas. Its 240 cm height is suitable for creating vertical proportions on tall walls. The 20x20 cm section can be used where a decorative column effect is desired without excessively reducing the passage area. The product is installed to clad existing columns or divide large wall surfaces. The colour can be selected to match the room's paint and panel arrangement, and the surface can be finished with water-based or synthetic paint.