Technical Specifications
| Material | Polyurethane decorative product |
|---|---|
| Surface | Decorative surface; specific surface texture not specified. |
| Color | Not specified; paintable. |
| Density | Belirtilmemiş |
| Water Absorption | below 1% |
| Dimensional Stability Test | -20 °C / +70 °C |
| Fire Class | B2 (DIN 4102-1) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 30 cm |
| Dimensions | 300 × 300 × 2400 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Pilaster Panel Columns)
The Pilaster Column is a polyurethane decorative product designed for vertical applications, adding classical architectural character to wall and column surfaces. Its 30x30x240 cm dimensions create a strong sense of proportion in entrances, living rooms and façades where height is a defining feature. The product is not an independent structural element; it is installed as a decorative covering over an existing concrete, steel or other structural column.
Thanks to its rigid, closed-cell polyurethane structure, the pilaster is lighter than comparable plaster and solid wood products while providing a more impact-resistant decorative surface. The material has a density of 150-220 kg/m³. Its closed-cell structure keeps water absorption below 1%. The product is assessed within the dimensional stability test range -20 °C / +70 °C, making it a practical option for areas where moisture-related deterioration is a significant concern.
P5030W creates the effect of a pilaster rising vertically along the wall through its decorative surface. Since the exact surface texture and colour are not specified, the product can be coloured for each project by selecting a paint system that complements the existing décor. The factory primer prepares the surface for painting, and either water-based or synthetic paint may be used. Any additional primer should be selected by the customer in accordance with the paint manufacturer's application and warranty requirements.
The Pilaster Column can be used to highlight door surrounds at villa entrances, turn column surfaces into architectural features in living rooms, define axes in hotel lobbies, and create a regular wall rhythm in shops or restaurants. In interiors, its 30 cm width creates a strong vertical frame on its own. Outdoors, it can be arranged around windows, doors or façade sections to form a decorative pilaster layout. UV-resistant paint is mandatory for exterior applications.
Before installation, the surface is cleaned and made dry and sound; the product is measured and cut if necessary. A mitre cut can be used for 45° joints. Polyurethane (PU) mounting adhesive is applied for fixing; silicone adhesive must not be used. Mechanical fastening with screws is mandatory. Joints and screw heads are filled, smoothed with 180-220 grit sandpaper, and then finished with primer and two coats of paint. For large-scale or unusual applications, the surface and fixing plan should be assessed separately.
The Pilaster Column preserves a refined architectural appearance while being lighter than plaster, more resistant to moisture and rot than wood, and harder and more detailed than EPS foam. Its B2 (DIN 4102-1) fire class structure, containing a phosphorus-based flame retardant additive, is used for decorative applications; however, this should not be interpreted as a guaranteed fire-resistance period or building classification. Its paintable and repairable surface offers long-term flexibility across a range of interior and exterior projects.
- The Pilaster Column is suitable for interior and exterior spaces where a stronger vertical architectural accent is desired
- In living rooms, it can be installed over the front face of existing columns to define the rhythm of the wall; in entrance halls, it can frame door axes and create a classical arrival area
- In bedrooms, it can be used as symmetrical vertical panels on either side of the headboard wall
- In hotel lobbies, it helps define the boundaries of reception areas or passageways; in offices, it can highlight the entrance to an executive room; and in restaurants, it can divide niches
- On villa façades, a decorative pilaster arrangement can be created around doors, windows and columns
- For exterior applications, surface joints and screw points should be filled with exterior-grade filler, followed by UV-resistant paint as the final coating
- The 30x30x240 cm size is suitable for tall wall and column surfaces and can be cut to suit the installation area
- The product does not carry structural loads and must not replace an existing structural column
- Before installation, check the condition of the supporting surface, the product dimensions and the fixing points
- Remove dust, dirt and moisture from the surface and allow it to become dry
- Measure the pilaster for the installation area and cut it if necessary; 45° mitre cuts are preferred at joints
- Apply polyurethane (PU) mounting adhesive to the back and position the product
- Silicone adhesive must not be used
- Because the product has its own weight and creates fixing loads, mechanical fastening with screws is mandatory; additional mechanical support should be planned for wide sections or unusual surfaces
- Fill the joints and screw heads, then smooth them with 180-220 grit sandpaper
- Finish by applying primer and two coats of paint
- The use of an additional primer should be assessed according to the selected paint manufacturer's instructions
- Clean the Pilaster Column with a soft, dry or slightly damp cloth
- Avoid hard brushes, abrasive sponges, strong solvent-based cleaning products and impact
- On exterior façades, inspect the paint film regularly; repair any affected area if cracking, blistering or opening joints are found
- The paint maintenance interval depends on the selected product and the surface's exposure to sunlight, rain and freeze-thaw conditions
Can the P5030W Pilaster Column be used outdoors?
Yes, P5030W can be used as a decorative covering on exterior façades. It is installed over an existing structural column or a sound wall surface and does not carry structural loads on its own. It must not be left unpainted outdoors and should be finished with UV-resistant paint. Joints and screw points should be sealed with exterior-grade filler. Before installation, assess the condition of the surface, the fixing requirements, and the area's exposure to rain and sunlight.
How is the Pilaster Column installed and painted?
Once the surface has been cleaned and dried, measure the product, cut it if necessary, and use 45° mitre cuts at the joints. Fix it with polyurethane (PU) mounting adhesive; silicone must not be used. Mechanical fastening with screws is mandatory. Fill the screw heads and joints, then smooth them with 180-220 grit sandpaper. The factory primer prepares the surface for paint; an additional primer may be used in accordance with the paint manufacturer's requirements. Apply two coats of either water-based or synthetic paint.
How durable is P5030W and what is its density?
P5030W has a rigid, closed-cell polyurethane structure. The stated density range for polyurethane decorative products is 150-220 kg/m³. Its closed-cell structure keeps water absorption below 1% and provides an advantage against moisture and is resistant to rot and moisture-related deterioration. The material is assessed to retain its form. Service life depends on correct installation, the quality of the paint system, surface maintenance and whether it is used indoors or outdoors.
What advantages does the Pilaster Column offer over plaster or wood?
A polyurethane pilaster is a lighter decorative cladding option than plaster or solid wood. Compared with plaster, it is less prone to breaking under impact; compared with wood, it offers greater resistance to moisture and rot. It provides a harder surface and more controlled detail than EPS foam. It can be cut, filled, sanded and painted. However, the product is decorative and must not be used in place of a structural column, beam or other structural element.
What size of space is P5030W suitable for, and can it be painted?
The 30x30x240 cm size of P5030W is suitable for tall entrances, living room columns, hotel lobbies, restaurant walls and villa façades. Its 240 cm height creates a vertical accent close to the ceiling in many applications; the clear height of the space should be checked before cutting. The product can be painted. The factory primer prepares the surface for paint, but paint manufacturers may not provide a warranty for applications made without their own primer. The decision to use an additional primer rests with the customer.