Polyurethane 25x50x240 cm Pilaster Column Cladding
Technical Specifications
| Material | Polyurethane |
|---|---|
| Surface | Smooth |
| Color | White (primed) |
| Density | 150-220 kg/m³ |
| Water Absorption | below 1% |
| Dimensional Stability Test | -20 °C / +70 °C |
| Fire Class | B2 (DIN 4102-1) |
| Paintable | Yes |
| Usage | Indoor |
| Diameter | Ø 25 cm |
| Dimensions | 250 × 500 × 2400 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Pilaster Columns)
A pilaster column is a vertical architectural cladding element that adds a decorative column appearance to interior wall or structural surfaces. The P5050W50 model, measuring 25x50x240 cm, strengthens the vertical emphasis of high-ceiling entryways, living rooms, and corridors. The product is not a load-bearing structural element; it is applied decoratively over existing surfaces.
Polyurethane material, with its closed-cell structure, creates a lightweight, rigid, and workable profile. Its density ranges from 150-220 kg/m³, making it easier to transport and handle than plaster or solid wood. The product is assessed within the dimensional stability test range -20 °C / +70 °C and has a water absorption rate below 1%. However, P5050W50 is designed for interior use and should not be considered a water-resistant product.
The smooth surface of P5050W50 adapts readily to classical or contemporary interior compositions. Factory-primed white finish provides a suitable base for the chosen paint system. Whether finished with water-based or synthetic paint, the column cladding can be coordinated with or differentiated from wall color to create contrast or visual unity. Additional primer application is optional; some paint manufacturers may not provide warranties for surfaces painted without their recommended primer. Polure assumes no responsibility for paint system performance.
This pilaster column can emphasize door frames in an entry hall, decoratively enhance structural columns in a living room, or establish rhythm along a long corridor. In hotel lobbies, restaurants, office reception areas, and residential interiors, two or more vertical elements can be positioned symmetrically at regular intervals. The 240 cm length provides vertical continuity on standard interior wall heights; the 25 cm width and 50 cm depth establish the product as a distinct architectural frame on its own.
Installation begins with preparing the surface—ensuring it is flat, clean, and dry. The profile is sized and cut with 45° mitered joints. P5050W50 is secured with polyurethane (PU) mounting adhesive only; silicone is not used. Mechanical fastening with screws and appropriate connectors must support the adhesive bond. Joints and screw heads are filled with joint compound, smoothed with 180–220 grit sandpaper, primed (if required by the paint system), and finished with two coats of paint. Lighter than plaster and more impact-resistant than solid wood, and more durable against moisture and rot than timber, polyurethane offers a practical, repairable, and paintable alternative for refined decorative applications.
- P5050W50 pilaster is used to add vertical and architectural dimension to existing interior walls or structural columns
- It is well-suited for framing door surrounds in entry halls, highlighting columns in living spaces, and creating rhythm along corridors
- The 25x50x240 cm proportion delivers strong vertical emphasis in tall interiors
- In spacious rooms, two pilasters positioned opposite one another establish symmetry; in narrow corridors, spaced applications along a single surface are preferred
- In hotel lobbies, restaurants, office reception areas, and traditionally decorated residences, the column can be painted a contrasting tone to emphasize architectural lines, or matched to surrounding walls for visual continuity
- The product is designed for interior use only; continuous moisture exposure makes it unsuitable for damp environments
- The column cladding provides no structural support and does not replace an existing column
- Prepare the wall or column surface until it is flat, clean, and dry
- Measure and cut the profile with 45° mitered joints at connections
- Apply P5050W50 using only polyurethane (PU) mounting adhesive; do not use silicone
- Reinforce the adhesive bond with screws and appropriate mechanical fasteners
- Fill joints and screw heads with joint compound
- Sand the dried surface with 180–220 grit sandpaper until smooth
- Follow the paint manufacturer's recommendations regarding primer application
- Finish with two coats of water-based or synthetic paint
- Clean the pilaster surface gently with a soft, slightly damp cloth
- Avoid abrasive powders, stiff brushes, and solvent-based cleaners, as these can damage the painted finish
- Do not leave the surface wet for extended periods
- If paint color or surface appearance changes over time, touch-up or repainting compatible with the existing paint system is possible
- Before refinishing, clean the surface, lightly sand affected areas if needed, and follow the paint manufacturer's application instructions
Where can P5050W50 be used?
P5050W50 can be applied to interior walls and existing structural columns to create a decorative column effect. Entry halls, living rooms, corridors, hotel lobbies, restaurants, and office reception areas are suitable applications. The 25x50x240 cm size creates strong vertical emphasis on tall walls. The product is decorative; it does not carry structural load and is applied as a cladding over existing surfaces.
How is the pilaster installed and painted?
Prepare a flat, clean, dry surface. Size the profile and cut 45° mitered joints. Secure it with polyurethane (PU) mounting adhesive only—do not use silicone. Support the adhesive with screws and appropriate mechanical fasteners. Fill joints and screw heads with compound, sand smooth with 180–220 grit paper, apply primer if required by the paint system, and finish with two coats of paint.
Is P5050W50 heavy, and how long does it last?
The closed-cell polyurethane structure provides a lightweight decorative profile compared to plaster or solid wood, with a density of 150-220 kg/m³. Its rigid composition helps preserve decorative form in daily interior use. Service life depends on surface preparation, connection quality, paint system, and room conditions. Design installation plans accordingly if the location is subject to impact.
What advantages does it have over plaster or wood?
P5050W50 is lighter and more impact-resistant than plaster. Compared to solid wood, it resists moisture-related decay and dimensional change. The material is cuttable, fillable, sandable, and paintable, simplifying post-installation surface finishing in interior column and wall applications.
Does the smooth P5050W50 suit different design styles?
The smooth profile design works well for projects seeking column effect without elaborate surface detail. In classical interiors, it clarifies door and wall lines; in modern settings, it delivers clean vertical geometry. The factory-primed white finish accepts water-based or synthetic paint, adapting to your interior color scheme. Primer application depends on your paint system; consult the paint manufacturer's recommendations.