25x25x240 cm Polyurethane Decorative Pilaster Column
Technical Specifications
| Material | Polyurethane decorative product |
|---|---|
| Surface | Decorative pilaster surface; specific surface texture not specified. |
| Color | Not specified; paintable. |
| Density | Belirtilmemiş |
| Water Absorption | below 1% |
| Dimensional Stability Test | -20 °C / +70 °C |
| Fire Class | B2 (DIN 4102-1) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 25 cm |
| Dimensions | 250 × 250 × 2400 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Pilaster Panel Columns)
The P5025W Pilaster Column is a polyurethane decorative element that adds vertical architectural emphasis to walls, columns and facade surfaces in both interior and exterior applications. Measuring 25x25x240 cm, it creates a tall, clearly defined pilaster effect and is particularly suitable for entrance surrounds, high walls and broad facade surfaces. The product is not a structural column; it is intended as a decorative covering installed over existing concrete, steel or other structural elements.
Made from rigid, closed-cell polyurethane, the P5025W has a density of 150-220 kg/m³. Compared with plaster, concrete, stone and solid wood, this construction provides a lightweight decorative element. Its water absorption is below 1%, offering advantages against moisture-related deterioration. It has high dimensional stability and has been tested to retain its form between -20 °C and +70 °C. In terms of reaction to fire, it has fire class B2 (DIN 4102-1). this product information does not establish a project-specific fire classification or resistance period.
The Pilaster Column's vertical panel character divides wall surfaces and creates a classical architectural rhythm around doors and windows, on column coverings or within facade compositions. After installation, the decorative surface can be adapted to different interior styles through the chosen paint colour. The factory primer prepares the surface for painting, and either water-based or synthetic paint may be used. Because paint manufacturers may not provide a warranty for applications made without their own primers, an additional primer should be considered according to the paint system. Polure does not warrant the paint system used and assumes no responsibility for the painting application.
The P5025W can be used for vertical decorative framing in entrance halls, living rooms, stairwell walls, hotel lobbies, restaurants and office reception areas. On villa and residential facades, it can highlight window or door axes, improve the proportions of an entrance facade or enhance existing columns with a finished covering effect. It must not be left unpainted outdoors and should be finished with UV-resistant paint. Compared with plaster, it is lighter and more stable in humid conditions; compared with wood, it offers greater resistance to decay; and compared with EPS foam, it provides a harder surface with more defined detailing.
For installation, a clean, dry and sound surface is prepared. If pieces are to be joined with a 45° mitre cut, the cut lines must be checked before application. Polyurethane (PU) mounting adhesive is used, with mechanical fastening by screws where required. Silicone adhesive must not be used. Screw heads and joints are filled, smoothed with 180-220 grit sandpaper, and then finished with primer and two coats of paint according to the surface system. With accurate cutting, mechanical support and suitable paint selection, the Pilaster Column provides a decorative covering solution that can be renewed over time.
- The P5025W Pilaster Column creates a clearly defined architectural axis on wall and facade surfaces through its tall vertical dimensions
- In an entrance hall, it can be positioned symmetrically around a doorway to emphasise the reception area; in a living room, it can be coordinated with column surfaces, a fireplace surround or broad wall sections
- On stairwell walls, it provides vertical division, while in hotel lobbies it can create a classical panel effect behind the reception desk
- In restaurants and offices, it can serve as decorative framing that helps define the entrance
- Used on either side of a bedhead wall, it strengthens the vertical proportions of a bedroom, although furniture placement and circulation clearances should be considered
- On villa and residential facades, it can be installed around doors, windows or existing columns as a decorative covering
- The product is not structural and must be mounted over an existing structural surface
- UV-resistant paint is required for exterior applications
- If several pilasters are used on the same surface, their vertical alignment, spacing and joint lines should be checked against the project before installation
- The application area is cleaned and made clean, dry and sound by removing dust, grease and loose material
- The P5025W dimensions of 25x25x240 cm are checked together with the vertical axis and end points of the surface
- Where joints are required, 45° mitre cuts are made and the cut surfaces are dry-fitted
- Only polyurethane (PU) mounting adhesive should be used for installation; silicone adhesive must not be used
- The product is positioned on the surface with adhesive, then mechanically secured with screws while taking the product's own weight and connection loads into account
- Screw heads and joints are filled
- Once dry, the surface is smoothed with 180-220 grit sandpaper
- After checking the factory primer, an additional primer may be applied if necessary, followed by two finish coats of suitable paint
- Outdoors, joints and screw points must be sealed with exterior-grade filler, and the finish paint must be UV-resistant
- The Pilaster Column surface should be cleaned gently with a soft, slightly damp cloth
- Abrasive creams, solvents, stiff brushes and equipment that could scratch the surface must not be used
- During cleaning, check the joints, screw points and paint surface for any signs of opening or deterioration
- Outdoors, the condition of the UV-resistant paint should be inspected periodically according to the level of exposure to sunlight and weather
- When repainting is required, clean the surface, remove loose paint, assess the appropriate sanding and primer system, and then apply new paint
Can the P5025W Pilaster Column be used outdoors?
Yes, the P5025W is suitable for both interior and exterior applications. It can be used on villa facades, around entrance doors and as a decorative covering for existing columns. Outdoors, the product must not be left unpainted; a UV-resistant paint system should be used to protect it from sunlight. Joints and screw points must be sealed with exterior-grade filler. The product is a decorative covering and does not replace a building's structural column. Before installation, the surface, fastening method and selected paint system should be assessed for the exterior conditions.
How is the Pilaster Column installed and painted?
Prepare a clean, dry and sound surface. Make any required cuts with a 45° mitre. Use polyurethane (PU) mounting adhesive for installation and also secure the product mechanically with screws. Silicone adhesive must not be used. Fill the screw heads and joints, then smooth them with 180-220 grit sandpaper. The factory primer prepares the surface for painting; an additional primer may be considered in line with the paint manufacturer's requirements. Finish with two coats of suitable paint.
What are the material and technical performance characteristics of the P5025W?
The P5025W is a decorative pilaster column made from rigid, closed-cell polyurethane. Its density is 150-220 kg/m³, and its dimensions are 25x25x240 cm. Water absorption is below 1%. The product is specified to be assessed within the dimensional stability test range -20 °C / +70 °C. Its polyurethane construction offers resistance to rot and moisture-related deterioration. Since the net weight is not provided in the available product information, no kilogram value can be stated; handling and fastening calculations should be based on the application conditions.
What advantages does a polyurethane pilaster column offer compared with plaster or wood?
A polyurethane pilaster column can be used as a lighter decorative element than plaster or solid wood. Its closed-cell construction offers advantages against moisture and decay. Compared with EPS foam, it provides a harder surface with more defined detailing. The surface can be filled, sanded and repainted. However, the P5025W is not designed to carry structural loads and must be installed as a decorative covering over a structural column or surface.
What type of paint can be used to colour the P5025W?
The P5025W can be painted and arrives with a factory primer that prepares the surface for paint application. Either water-based or synthetic paint may be used. The paint should be selected according to whether the product is installed indoors or outdoors. UV-resistant paint is required outdoors; unpainted polyurethane may yellow in sunlight. An additional primer should not be treated as universally mandatory; the paint manufacturer's technical system and warranty conditions should be reviewed. Polure does not warrant the paint system used, and colour performance depends on the application conditions.