25x50x240 cm Fluted Polyurethane Pilaster Column Decor
Technical Specifications
| Material | Polyurethane |
|---|---|
| Surface | Grooved and decorative surface texture |
| Color | White |
| Density | 150-220 kg/m³ |
| Water Absorption | below 1% |
| Dimensional Stability Test | -20 °C / +70 °C |
| Fire Class | B2 (DIN 4102-1) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 25 cm |
| Dimensions | 250 × 500 × 2400 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Fluted Pilaster Column)
A pilaster column is a decorative facade and interior element with a fluted surface, adding vertical architectural emphasis around walls, doors or windows. The P505050 model measures 25x50x240 cm and creates a broad, clearly defined profile extending from floor to ceiling. It is not a structural column; it is installed as a decorative covering over an existing load-bearing surface or column.
Its closed-cell rigid PU construction combines low weight with surface durability. With a density of 150-220 kg/m³, the material offers a hardness similar to wood while being easier to handle than plaster and solid stone alternatives. It retains its form within the dimensional stability test range of -20 °C / +70 °C, with water absorption below 1%. Its resistance to rot and moisture-related deterioration allows use in interior and exterior projects when the correct paint system is applied. In case of fire, the material has fire class B2 (DIN 4102-1).
The 25 cm width and 50 cm depth prevent the pilaster from appearing as merely a narrow line on the wall. They create a clearly legible architectural frame at entrances, in high-ceilinged rooms and across facade compositions. The 240 cm length is a practical starting size for vertical applications. Its visual character comes from regular fluting that runs along the body. This rhythmic surface accentuates the transitions between light and shadow, creating a classical architectural effect around doors, along window axes or across sections of a wall.
The P505050 pilaster column can be used to strengthen door compositions at villa entrances, highlight niches in living rooms or dining areas, divide wall axes in hotel lobbies and create a decorative column appearance in restaurants. On facades, it can frame window edges, entrance doors or serve as the vertical complement to decorative arrangements between floors. It should not be left unpainted outdoors and must be protected with UV-resistant paint. The factory primer prepares the surface for painting; however, paint manufacturers may not provide a warranty for applications made without their own primer. For this reason, additional primer is optional, while responsibility for the paint system rests with the installer.
Before installation, the surface must be clean, dry, sound and even. Pieces are cut with a 45° mitre, joints are checked, and only polyurethane (PU) mounting adhesive is used; silicone adhesive is not suitable. Mechanical fixing with screws is also mandatory. Where necessary, anchors and additional support should be used for the wide profile. Joints are filled, smoothed with 180-220 grit sandpaper, and then finished with a suitable primer and two coats of paint. Compared with plaster, it offers greater resistance to breakage; compared with wood, greater resistance to moisture and rot; and compared with EPS foam, a harder and more detailed decorative solution.
- The P505050 fluted pilaster column can be used in interior and exterior spaces where vertical architectural emphasis is required
- Installed symmetrically on both sides of a villa entrance, it gives the doorway a classical frame
- It can be used in a living room, dining room or spacious entrance hall to divide wall axes and draw attention to niches
- Mirrors, wall panels or decorative lighting can be placed between pilasters in hotel lobbies, restaurants and office reception areas
- The shadow effect created by the fluting is more pronounced on walls exposed to direct light
- The 240 cm length can be used for a single-piece vertical application on walls of a suitable height; on taller surfaces, continuity and joint details should be planned according to the project dimensions
- On villa facades, it can be installed around windows and entrances as a decorative covering without altering the structural function of existing columns
- Outdoors, the product must be coated with UV-resistant paint, and joints and screw points must be sealed with exterior-grade filler
- Remove dust, grease and loose layers from the application surface, leaving it clean, dry, sound and even
- Measure the pilaster column; if cutting is required, use a 45° mitre and mark the joint directions in advance
- Apply polyurethane (PU) mounting adhesive to the back and press the piece into position on the surface
- Do not use silicone adhesive
- Mechanical fixing with screws is mandatory in addition to the adhesive; select suitable anchors according to the surface and application conditions
- Fill the joints with filler and level them with 180-220 grit sandpaper
- Check the factory primer before applying the paint system
- Water-based or synthetic paint may be used; outdoors, a UV-resistant product and two coats are recommended
- Clean the pilaster column with a soft, dry cloth or a lightly dampened cloth
- Do not use abrasive creams, solvents, stiff brushes or equipment that could scratch the surface
- Outdoors, inspect the paint film visually at regular intervals; if cracking, blistering or colour changes appear, renew the coating according to the paint manufacturer's system
- If joints or screw points open up, clean the area, repair it with exterior-grade filler and touch up the paint
- Maintenance frequency depends on sun exposure, rainfall and usage conditions
Can the P505050 pilaster column be used outdoors?
Yes, the product can be used for exterior decoration, but it should not be left unpainted. After installation, it must be coated with UV-resistant exterior paint. It can be installed around windows and entrances as a decorative complement to existing columns or wall axes. Joints and screw points should be sealed with exterior-grade filler, and open connections that could allow water to collect should be avoided. The pilaster is decorative and does not carry structural loads; it is installed as a covering over an existing structural element.
How is a pilaster column installed and painted?
Once the surface is clean, dry and sound, measure the piece and cut it with a 45° mitre if necessary. Use only polyurethane (PU) mounting adhesive for installation; silicone is not suitable. Mechanical fixing with screws is mandatory. Fill the joints, smooth them with 180-220 grit sandpaper, and apply a suitable primer and paint system. The factory primer prepares the surface for painting; the need for additional primer depends on the paint manufacturer's recommendation.
What are the dimensions and material durability of the pilaster column?
The P505050 model measures 25x50x240 cm. Its 25 cm width and 50 cm depth make it a clearly defined wall and facade feature rather than a narrow moulding. The 240 cm length is a practical starting size for vertical applications. The closed-cell rigid PU material has a density of 150-220 kg/m³. It retains its form within the dimensional stability test range of -20 °C / +70 °C, and its water absorption is below 1%. The product is decorative and must not be used as a structural column.
Why choose a pilaster column instead of plaster or wood?
Rigid PU pilasters are lighter and more impact-resistant than plaster. Compared with wood alternatives, they offer greater resistance to moisture and rot. When used outdoors with the correct paint system, the closed-cell material reduces the risk of moisture-related deformation. Moulded production preserves the regular arrangement of the flutes, while the piece can be cut, filled, sanded and repainted. However, the product is not intended to carry structural loads, and its fixing connections must always be suitable for the surface.
Which spaces are suitable for the P505050 pilaster column?
The model can be used at villa entrances, around doors and windows, in living rooms, dining rooms, entrance halls, hotel lobbies, restaurants and office reception areas. Indoors, highlighting the fluted body with lighting and placing a mirror or wall panel between pilasters can produce an effective result. Outdoors, it can strengthen window axes and entrance compositions. The paint colour should be considered together with the surrounding window surrounds, string courses and wall tones.