30x60x240 cm Fluted Polyurethane Pilaster Column Decoration
Technical Specifications
| Material | Polyurethane |
|---|---|
| Surface | Fluted |
| Color | Paintable surface |
| Density | 150-220 kg/m³ |
| Water Absorption | below 1% |
| Dimensional Stability Test | -20 °C / +70 °C |
| Fire Class | B2 (DIN 4102-1) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 30 cm |
| Dimensions | 300 × 600 × 2400 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Fluted Pilaster Column)
The P506050 Pilaster Column is a fluted polyurethane architectural decoration element that gives wall surfaces the appearance of a classic column. Measuring 30 x 60 x 240 cm, it creates a strong vertical accent across wide walls and offers a well-proportioned solution for entrance halls, high-ceilinged rooms and facade compositions. Rather than standing freely like a full column, the pilaster is installed against the wall to add architectural depth and a balanced rhythm.
The product is made from closed-cell rigid PU with a density of 150-220 kg/m³. Compared with plaster and solid wood alternatives, this construction allows for a lighter installation. Its water absorption is below 1%, providing an advantage when selecting materials for humid environments. Dimensional stability for the P506050 has been tested between -20 °C / +70 °C. This specification does not indicate service temperature or temperature resistance. The product is decorative and must not be used to carry structural loads.
The fluted surface creates regular vertical lines along the pilaster body. The contrast between the raised areas catching the light and the recessed channels in shadow gives the wall greater visual depth. The factory-primed surface is ready for water-based or synthetic paint. An additional primer may be preferred, as paint manufacturers may not provide a warranty for surfaces painted without their own primer; this choice depends on the application system and the customer’s preference. The product must not be left unpainted outdoors, and UV-resistant paint should be used.
P506050 can be used to highlight door surrounds at villa entrances, define wall axes in hotel lobbies, and create a classical architectural setting in restaurants and retail spaces. Two pilasters can be placed symmetrically in a living room or corridor to frame a niche, mirror or decorative wall panel. They can also be installed on either side of a bedroom headboard wall. On facades, the product can be applied between windows, around entrance areas or within floor-level compositions as a decorative vertical element; it is a surface decoration and not a load-bearing column.
Before installation, the surface must be clean, dry and even. The pieces are prepared with 45° mitre cuts, fixed with polyurethane (PU) mounting adhesive, and must also be mechanically secured with screws. Joints and screw points are filled, then sanded with 180-220 grit sandpaper before primer and two coats of paint are applied. For applications with wide sections, the fixing detail should be assessed separately according to the surface and project conditions. Silicone adhesive must not be used.
With its fluted profile, P506050 combines classical architectural order with practical installation. It is lighter and more impact-resistant than plaster, more suitable for humid conditions and resistant to rot than wood, and offers a harder, more detailed surface than EPS foam. Fire information is defined by the B2 (DIN 4102-1) classification and the phosphorus-based flame retardant additive. When maintained with a compatible paint system, the pilaster provides a surface that can be renewed over time in both interior and exterior decoration.
- The P506050 Pilaster Column can be used in classical and neoclassical interiors to create a vertical decorative accent against the wall
- In living rooms, it can form a symmetrical frame on either side of a fireplace, mirror, TV unit or decorative wall panel
- It is suitable for defining door axes in entrance halls, creating a rhythm along long corridors and dividing tall walls in hotel lobbies
- In restaurants, shops and offices, it can be painted in a colour that matches the brand identity and used around reception or transition areas
- Its 240 cm height creates a strong vertical proportion in rooms with standard ceilings, while its 30 x 60 cm section can be used alone or in opposing pairs across wide walls
- It can also frame a bedroom headboard wall
- The product may be applied as exterior surface decoration at villa entrances, between windows and along facade axes
- For exterior use, UV-resistant paint must be applied over the factory primer
- The pilaster is a decorative cladding element and must not be used as a load-bearing column
- Before application, make sure the wall is clean, dry, sound and as even as possible
- Mark the pilaster pieces according to the layout plan and make 45° mitre cuts at the required joints
- Check the cut surfaces and dry-fit each piece before fixing it in place
- Use only polyurethane (PU) mounting adhesive for bonding; do not use silicone adhesive
- In addition to the adhesive, mechanical fixing with screws is mandatory
- Cover screw heads and joints with a suitable filler
- Smooth the cured surface with 180-220 grit sandpaper
- Apply an additional primer over the factory-primed surface if required by the application system, then apply two coats of water-based or synthetic paint
- Outdoors, joints and screw points must be sealed with exterior-grade filler, and the final paint must be UV-resistant
- The P506050 surface can be dusted with a soft, slightly damp cloth
- Do not use abrasive sponges, stiff brushes, solvents or chemicals that may scratch the surface
- On painted surfaces, the cleaning method should follow the maintenance instructions for the water-based or synthetic paint system used
- Outdoors, joints, screw points and the painted surface should be inspected periodically
- If cracking, impact damage or paint wear appears, the affected area can be filled, sanded and repainted
Can P506050 be used outdoors?
Yes, P506050 can be used outdoors as a decorative surface element. It creates a vertical accent at villa entrances, between windows and along facade axes. After installation, the surface must be completed in accordance with the exterior paint system. Since an unpainted PU surface may yellow under UV exposure, UV-resistant paint is required. Joints and screw points must be sealed with exterior-grade filler. The pilaster is decorative cladding only and must not be used as a load-bearing column or structural support.
How is the pilaster column installed and painted?
After the surface has been made clean, dry and even, measure the pieces and make 45° mitre cuts at the required joints. Fix the pieces with polyurethane (PU) mounting adhesive and screws; silicone must not be used. Fill the screw heads and joints, then smooth them with 180-220 grit sandpaper. An additional primer may be applied over the factory-primed surface depending on the application system. Finish with two coats of water-based or synthetic paint.
What are the product’s material density and technical structure?
P506050 is a decorative pilaster column made from closed-cell rigid PU. Its density is 150-220 kg/m³ and its water absorption is below 1%. Dimensional stability has been tested between -20 °C / +70 °C; this data must not be interpreted as service temperature or temperature resistance. The product must be installed with its own weight and fixing loads taken into account. Proper surface preparation, mechanical fixing, filling and painting support the product’s service life.
Why choose P506050 instead of plaster or wood?
P506050 offers a lighter and more impact-resistant decorative alternative to plaster. Its material structure is more suitable than wood for conditions involving moisture and rot. Compared with EPS foam, it provides a harder surface with more defined fluted details. It also arrives factory-primed and can be filled, sanded and repainted. However, the pilaster does not carry structural loads, and mechanical fixing with screws is required in addition to adhesive during installation.
Which interiors are best suited to a fluted pilaster?
The fluted body creates differences between light and shadow, making it particularly effective on wide or tall walls. It can be used on either side of a fireplace or mirror in a living room, around a doorway in an entrance hall, or to emphasise column axes in a hotel lobby. It is also suitable for dividing wall panels in restaurants and shops or adding a classical architectural detail behind a reception desk. The 30 x 60 x 240 cm size allows the pilaster to be used alone or in symmetrical pairs.