Fluted 50x50x240 cm Polyurethane Decorative Pilaster Column
Technical Specifications
| Material | Polyurethane decorative product |
|---|---|
| Surface | Grooved decorative surface |
| Color | Not specified |
| Density | 150-220 kg/m³ |
| Water Absorption | below 1% |
| Dimensional Stability Test | -20 °C / +70 °C |
| Fire Class | B2 (DIN 4102-1) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 50 cm |
| Dimensions | 500 × 500 × 2400 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Fluted Pilaster Column)
The P5050 Pilaster Column is a decorative polyurethane architectural element that adds classical character to walls, columns and facade surfaces through its vertical fluting. Measuring 50x50x240 cm, it is suitable for projects requiring a tall, broad profile. The pilaster is not a structural column and does not carry loads; it is applied as decorative cladding over an existing wall, column or facade.
The product is manufactured from rigid polyurethane with a closed-cell structure. Its density is 150-220 kg/m³. This construction provides a lighter alternative to plaster, concrete and solid wood while helping the vertical lines remain clearly defined. The P5050 has undergone dimensional stability testing within -20 °C / +70 °C. Water absorption is below 1%, and dimensional stability is high. The product is classified as B2 (DIN 4102-1)
The fluted decorative surface consists of evenly spaced vertical channels running along the pilaster body. This rhythmic profile emphasizes transitions between light and shadow, giving a plain wall a more architectural appearance. Delivered with a factory primer, the surface can be finished with water-based or synthetic paints. The factory primer prepares the surface for painting, but paint manufacturers may not provide a warranty for applications made without their own primer. Additional priming is therefore optional and remains at the discretion of the installer. Polure does not warrant the paint systems used.
The P5050 Pilaster Column can be used on both sides of door openings in entrance halls, around walls or columns in living rooms, and in hotel lobbies, restaurants and retail interiors. For exterior applications, it can be used at villa entrances, around window compositions and on architectural facade sections. UV-resistant paint is mandatory outdoors; otherwise, unpainted polyurethane may yellow over time. Its 240 cm height creates a vertical accent close to a standard storey height. On wider facades, it should be coordinated with similar pieces in a considered layout.
Before installation, the surface must be clean, dry and sound. Where cutting is required, use 45° mitre cuts. The P5050 is fixed with polyurethane (PU) mounting adhesive, and screws must be used for mechanical fastening. On wide or tall installations, the fastening method must be selected according to the load-bearing capacity of the surface and the product's own weight. Joints are filled, smoothed with 180-220 grit sandpaper, and then finished with primer and two coats of paint. Silicone adhesive must not be used.
Compared with plaster, the P5050 is lighter and more resistant to impact. Compared with wood, it offers greater resistance to moisture and decay as a decorative element. It retains its hardness and surface detail better than EPS foam. Because it can be filled, sanded and repainted, the pilaster can be repaired over time and adapted to different interior styles.
- The P5050 Pilaster Column can be used to emphasize door surrounds in entrance areas, add decorative cladding to existing columns in living rooms and introduce vertical architectural rhythm to wall surfaces through its fluted design
- With a 50x50 cm body, it is suitable for broad walls where a more pronounced column effect is desired instead of a narrow moulding
- Its 240 cm height suits spaces where vertical emphasis is important, including entrance halls, hotel lobbies, restaurants and retail interiors
- In bedrooms, it can create a symmetrical composition on both sides of the bed
- In offices, it can frame the wall behind a reception desk or define a meeting area with a classical detail
- It can also be used outdoors at villa entrances, around windows and along facade axes
- Exterior applications must be finished with UV-resistant paint
- To strengthen the light-and-shadow effect of the fluting, the pilaster can be combined with darker surrounding mouldings against a lighter body, although the colour scheme should be determined by the project design
- Before installing the P5050 Pilaster Column, the surface must be clean, dry, sound and free from dust
- Mark the product position and dimensions on the surface
- Use 45° mitre cuts where cutting is required
- Position the pilaster with a polyurethane (PU) mounting adhesive suitable for the surface and application conditions
- Mechanical fastening with screws is mandatory; screw positions must be determined with regard to the product's own weight, connection loads and the load-bearing capacity of the surface
- The product is not structural
- Fill the joints and screw heads with filler, then smooth them with 180-220 grit sandpaper once dry
- Check the factory primer; apply additional primer if required, followed by two coats of paint
- Do not use silicone adhesive
- For exterior applications, seal joints with exterior-grade filler and use UV-resistant paint
- The P5050 Pilaster Column can be cleaned with a soft, dry or slightly damp cloth
- Remove dust from between the flutes with a soft cleaning tool rather than a stiff brush
- Abrasive chemicals, solvents, rough sponges and high-pressure cleaning can damage the surface coating
- Outdoors, inspect the paint film, joints and screw points regularly
- If yellowing, cracking or surface separation appears, clean the affected area and renew it with a suitable filler and paint system
- Also follow the maintenance and repainting instructions for the paint system used
Can the P5050 Pilaster Column be used outdoors?
Yes. The P5050 Pilaster Column can be used outdoors as decorative cladding. It can be installed at villa entrances, around windows and along facade axes, but it does not carry structural loads. For exterior applications, joints and screw points must be sealed with exterior-grade filler, and the surface must be finished with UV-resistant paint. Painting is mandatory outdoors because unpainted polyurethane may yellow under sunlight. Check the condition of the surface and the mechanical fastening method before installation.
How is the P5050 installed and painted?
The installation surface must be clean, dry and sound. Make any required cuts with a 45° mitre. Position the product with polyurethane (PU) mounting adhesive and secure it mechanically with screws; do not use silicone. Fill the joints and screw heads, then smooth them with 180-220 grit sandpaper. The factory primer prepares the surface for painting, while additional primer is optional. Finish with two coats of suitable paint. Use UV-resistant paint outdoors.
Is the P5050 Pilaster Column heavy, and how durable is it?
With its closed-cell rigid polyurethane construction, the P5050 is a lightweight decorative element compared with plaster, concrete and similar solid wood alternatives. Its density is 150-220 kg/m³; the actual piece weight may vary according to production and cross-section. The material has dimensional stability tested between -20 °C and +70 °C and high dimensional stability. Water absorption is below 1%. Durability and service life depend on correct installation, suitable paint and maintenance in exterior environments.
What advantages does a polyurethane pilaster offer over plaster or wood?
The P5050 is a lighter and more impact-resistant decorative solution than plaster. Compared with wood, it is more resistant to moisture and decay. Its closed-cell structure helps keep water absorption below 1%. The product can be filled, sanded and painted, making minor surface repairs and future decor changes easier after installation. However, the P5050 is decorative and cannot replace a structural column.
Which spaces are suitable for the P5050 Pilaster Column?
The P5050 can be used in entrance halls, living rooms, bedrooms, offices, shops, restaurants and hotel lobbies. Outdoors, it can be considered for villa entrances, window surrounds and architectural facade axes. Its 50x50 cm body is suitable for broad surfaces where a more pronounced pilaster effect is wanted. The 240 cm height creates a vertical accent. Symmetrical positioning and coordination with surrounding mouldings are recommended to highlight the light-and-shadow effect of the fluted surface.