30x30x240 cm Grooved Pilaster Column | Polyurethane decorative product
Technical Specifications
| Material | Polyurethane decorative product |
|---|---|
| Surface | Grooved decorative surface |
| Color | Not specified; paintable |
| Density | Belirtilmemiş |
| Water Absorption | below 1% |
| Dimensional Stability Test | -20 °C / +70 °C |
| Fire Class | B2 (DIN 4102-1) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 30 cm |
| Dimensions | 300 × 300 × 2400 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Fluted Pilaster Column)
The P5030 Grooved Pilaster Column is a polyurethane decorative product that gives a wall or column surface the appearance of a pilaster. Measuring 30x30x240 cm, it provides balanced vertical proportions for high-ceilinged entrances, spacious living rooms and exterior facade compositions. It is intended as a decorative covering applied over an existing structural surface, not as a load-bearing column.
The P5030 Pilaster Column is made from rigid polyurethane with a closed-cell structure. With a density of 150-220 kg/m³, the material is lighter than plaster and solid wood while providing the rigidity required for decorative applications. Its water absorption rate is below 1%, offering an advantage in humid environments. The product has been tested to retain its form between -20 °C and +70 °C. It also has fire class B2 (DIN 4102-1) and contains a phosphorus-based flame retardant additive.
The grooved surface gives the pilaster body a vertical rhythm of lines. The parallel channels make changes in light and shadow more pronounced throughout the day, giving a flat wall a more layered appearance. The factory-primed surface can be finished with water-based or synthetic paint. The factory primer prepares the surface for painting; however, paint manufacturers may not provide a warranty for surfaces painted without using their own primer. Additional priming is therefore optional, and the choice of paint system remains the responsibility of the installer. Polure does not guarantee the paints used and accepts no responsibility for the painting work.
The P5030 Grooved Pilaster Column can be used around doors in residential entrances, on hallway and living-room walls, in stair halls or to provide a decorative covering for existing columns. On villa facades, it can be installed between windows or used as a vertical feature that emphasizes the entrance axis. In commercial spaces such as hotel lobbies, restaurants and offices, a pilaster arrangement can be combined with wall panels, string courses and other classical architectural mouldings. UV-resistant paint is mandatory for exterior applications.
For installation, the surface is cleaned and prepared so that it is dry and sound; 45° mitre cuts are made as required. The P5030 is installed with polyurethane (PU) mounting adhesive and mechanically secured with screws. Silicone adhesive must not be used. Joints and screw points are filled with suitable filler and smoothed with 180-220 grit sandpaper, followed by primer and two coats of paint. For large or special applications, the fastening method, surface characteristics and connection loads must be assessed together.
As a polyurethane decorative product, the P5030 is lighter than plaster and less prone to breakage, while offering greater resistance to moisture and moisture-related deterioration than wood. Its ability to be cut, filled, sanded and repainted makes on-site adjustments and long-term maintenance easier. With its size and grooved surface, it is a practical option for architectural projects that require a defined pilaster appearance.
- The P5030 Grooved Pilaster Column can be used in interior and exterior spaces where a strong vertical architectural accent is needed
- Its 240 cm height makes it suitable for emphasizing a door or wall axis in living rooms, hallways and entrance halls with standard ceiling heights
- Measuring 30x30 cm, it forms a substantial decorative pilaster mass rather than a narrow moulding
- In a living room, a wall panel or mirror can be positioned between two pilasters; in a bedroom, they can create a symmetrical frame on either side of a feature wall
- It can also be used around entrance doors, between windows on a facade and as a decorative covering for columns
- In hotel lobbies, classically designed restaurants and executive offices, it can enrich the wall composition
- On exterior facades, the product must be coated with UV-resistant paint
- When combined with pilaster decor, string courses, window surrounds and suitable wall mouldings, it helps establish a vertical and horizontal balance across the facade
- Before installation, inspect the P5030 Pilaster Column and the mounting surface
- The surface must be clean, dry, sound and free from dust
- After the measurements are transferred, prepare the required cuts with 45° mitre joints
- Position the product on the surface using polyurethane (PU) mounting adhesive; silicone adhesive must not be used
- Mechanical fastening with screws is mandatory in addition to adhesive
- Cover screw heads and joint lines with suitable filler
- After drying and surface preparation, sand with 180-220 grit sandpaper
- The factory primer prepares the surface for painting; additional primer is optional
- Finally, apply two coats of water-based or synthetic paint
- For exterior applications, UV-resistant paint and exterior-grade filler should be preferred
- Clean the surface of the P5030 Grooved Pilaster Column with a soft cloth or soft brush to prevent dust from accumulating between the grooves
- If necessary, use a lightly damp cloth, but do not leave the surface wet for extended periods
- Do not use abrasive chemicals, hard sponges or tools that could scratch the grooves
- If the painted surface shows blistering, cracking or colour changes, clean the affected area, sand it appropriately and repaint it according to the selected paint system
- On exterior facades, check the condition of the UV-resistant paint regularly
Can the P5030 Grooved Pilaster Column be used outdoors?
Yes, the P5030 can be used for exterior facade decoration. It can be installed between windows, around villa entrances, as a decorative covering for existing columns or as a vertical accent on a facade. It must not be left unpainted outdoors and should be finished with UV-resistant paint. Joints and screw points should be sealed with exterior-grade filler. The product is decorative and does not carry structural loads; it must be installed as a covering over an existing structural surface. Mechanical fastening should be selected according to the surface conditions and connection loads.
How is the P5030 Pilaster Column installed and painted?
Prepare the mounting surface so that it is clean, dry and sound. Measure the product, make the required joints with 45° mitre cuts and position it with polyurethane (PU) mounting adhesive. Mechanical fastening with screws is mandatory; silicone must not be used. Fill the screw points and joints, then smooth them with 180-220 grit sandpaper. Apply primer followed by two coats of paint. The factory primer prepares the surface for painting; additional primer is optional, and the paint manufacturer's warranty conditions should be reviewed separately.
How durable is the P5030, and how much does it weigh?
The P5030 is made from rigid polyurethane with a closed-cell structure and has a density of 150-220 kg/m³. Its water absorption rate is below 1%, providing an advantage against moisture. The material is designed to retain its form within the dimensional stability test range -20 °C / +70 °C. The product's exact weight is not specified in this information; the installation plan should consider the piece's own weight, connection loads and mounting surface together. Because the polyurethane structure can be cut, filled and repainted, surface maintenance and repair are possible.
What advantages does a pilaster column offer compared with plaster or wood?
The P5030 is a lighter decorative alternative to plaster and is less prone to breakage. Compared with wood, it offers greater resistance to moisture and decay. Its grooved surface details are consistently preserved through moulded production, and the product can be cut, filled, sanded and painted. Its closed-cell structure and water absorption rate below 1% provide an advantage in humid applications. However, the P5030 does not carry structural loads and must only be used as a decorative covering on an existing wall, column or facade surface.
Which paint can be used to finish the P5030 Pilaster Column?
The P5030 is supplied factory-primed and can be finished with water-based or synthetic paint. The factory primer helps prepare the surface for painting; however, paint manufacturers may not warranty applications made without their own primer. Additional primer is therefore optional and should be assessed according to the paint system selected by the customer. UV-resistant paint is mandatory for exterior applications. Before painting, filled areas should be smoothed with 180-220 grit sandpaper, and two coats of paint should be applied after cleaning the surface.