Technical Specifications
| Material | Polyurethane decorative product |
|---|---|
| Surface | Grooved and decorative surface texture |
| Color | Paintable surface; supplied color not specified. |
| Density | Belirtilmemiştir. |
| Water Absorption | below 1% |
| Dimensional Stability Test | -20 °C / +70 °C |
| Fire Class | B2 (DIN 4102-1) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 40 cm |
| Dimensions | 400 × 400 × 2400 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Fluted Pilaster Column)
A fluted pilaster column is a decorative architectural covering applied to a wall or existing column surface to create a strong vertical accent. The P5040 model measures 40x40x240 cm and has a square section, making it suitable for high-ceilinged entrances, spacious rooms and facade compositions. It is not designed to carry structural loads; it should be used as a decorative covering over a load-bearing concrete or steel column, or an existing column.
P5040 is made from closed-cell rigid polyurethane. With a density of 150-220 kg/m³, it is lighter than plaster, concrete, stone and solid wood while retaining its decorative surface details. Water absorption is below 1%, providing an advantage in humid environments. The material maintains its form within the dimensional stability test range -20 °C / +70 °C and remains highly stable. In terms of reaction to fire, it has fire class B2 (DIN 4102-1).
The fluted surface creates a pattern of light and shadow through repeated vertical channels along the pilaster body. This regular profile supports the vertical rhythm of classical architectural facades while also adding definition to contemporary interiors. The 40 cm-wide section can create a strong framing effect on its own or form part of a composition around a doorway, niche or column. The surface is factory-primed and can be finished with water-based or synthetic paint.
The pilaster column is suitable for highlighting door surrounds at villa entrances, dividing wall panels in hotel lobbies and creating a decorative column effect in restaurants and retail spaces. In living rooms, it can frame a fireplace or TV unit; in bedrooms, it can be placed on either side of a headboard composition; and in offices, it can be used behind a reception desk. For exterior applications, UV-resistant paint is required, and joints and screw points must be sealed with exterior-grade filler. Unpainted polyurethane may yellow outdoors.
Before installation, the surface must be clean, dry, sound and even. Cuts are made with a 45° mitre, and the pieces are fixed with polyurethane (PU) mounting adhesive together with the necessary mechanical fasteners. The product's own weight and connection loads must be taken into account, and screws and wall plugs should be used for wide or tall applications. Compared with plaster, it is more resistant to breakage; compared with wood, it offers greater resistance to moisture and decay; and compared with EPS foam, it is harder and retains more detailed profiles. The factory primer prepares the surface for painting, while the choice of any additional primer is left to the customer. Paint manufacturers may not provide a warranty for surfaces that have not been treated with their own primer. Polure does not provide a warranty for the paints used.
- The P5040 fluted pilaster column can be used in medium- and large-scale spaces that need a strong vertical architectural accent, thanks to its 40 cm width and 240 cm height
- Installed symmetrically on both sides of a door at a villa entrance, it gives the facade a framed appearance
- It can be applied around existing structural columns as a decorative covering; the product itself is not structural
- In living rooms, it can be placed on both sides of a fireplace, TV unit or large niche
- It creates vertical rhythm in entrance halls and on stairway walls
- It can also be used to divide wall panels in hotel lobbies, restaurants, retail spaces and office reception areas
- Placed on either side of a bedhead, it creates a classic framing effect in bedrooms
- Outdoors, it can complement architectural arrangements around doors and windows
- For exterior applications, UV-resistant paint should be used, and joints and screw points must be sealed with exterior-grade filler
- To emphasize the light-and-shadow effect of the flutes, a light body color can be combined with a darker shade for the detailing
- The application area must be free from dust, grease and moisture, and should be sound, dry and as even as possible
- Check the pilaster pieces in position, mark the cutting points and make 45° mitre cuts at the joints
- Use only polyurethane (PU) mounting adhesive for fixing; silicone must not be used
- Mechanical fixing with screws and suitable wall plugs is also required, taking the product's own weight and connection loads into account
- Fill the joints and screw heads with filler, then smooth them with 180-220 grit sandpaper
- The factory primer prepares the surface for painting; applying an additional primer is optional
- Apply two coats of water-based or synthetic paint as the finish
- UV-resistant paint must be used outdoors
- Clean the surface of the P5040 pilaster column with a soft, dry or slightly damp cloth
- Remove dust from between the flutes with a soft brush or a low-pressure cleaning method rather than hard-edged tools
- Do not use abrasive detergents, stiff brushes, solvents or chemicals that may damage the surface
- Outdoors, inspect the paint film regularly
- If cracks, blistering or separation at the joints appears, repair the area with suitable exterior-grade filler and UV-resistant paint
- The need for repainting depends on the paint system used and the environmental conditions to which it is exposed
Can the P5040 fluted pilaster column be used outdoors?
Yes, P5040 can be used for exterior decoration. It must be installed as a decorative covering over an existing structural column or wall; the product does not carry structural loads. Because unpainted polyurethane may yellow outdoors, UV-resistant paint is required. Joints and screw points must be sealed with exterior-grade filler. Its closed-cell structure offers an advantage against rain, moisture and temperature changes, but the surface and paint system must still be prepared in accordance with the application conditions.
How is a pilaster column installed and painted?
Before installation, the surface must be made clean, dry, sound and even. Cut the pieces with a 45° mitre where necessary, then install them with polyurethane (PU) mounting adhesive. Mechanical fixing with screws and suitable wall plugs is required; silicone must not be used. Fill the joints, smooth them with 180-220 grit sandpaper and apply paint. The factory primer helps the paint adhere. Any additional primer is optional, and the surface can be finished with water-based or synthetic paint.
Is the P5040 pilaster column heavy, and how long does it last?
P5040 is made from rigid polyurethane with a density of 150-220 kg/m³. This construction provides a lightweight alternative to plaster, concrete, stone and solid wood, although the product's own weight and connection loads must be taken into account during installation. Its closed-cell structure keeps water absorption below 1%. The material maintains its form within the dimensional stability test range -20 °C / +70 °C and remains highly stable. Service life depends on the paint used, installation quality and maintenance conditions.
What are the advantages of a polyurethane pilaster column over plaster or wood?
A polyurethane pilaster column is lighter than plaster and more resistant to impact. Compared with solid wood, it is less vulnerable to moisture and moisture-related deterioration. It provides a harder surface and more defined fluted details than EPS foam. Because it can be cut, filled, sanded and painted, surface corrections after installation are easier. However, it is a decorative product and must not be used as a structural column or other structural element.
Can the surface of the P5040 pilaster column be painted?
Yes, P5040 can be finished with water-based or synthetic paint thanks to its factory-primed surface. The factory primer prepares the surface for painting, while applying an additional primer is left to the customer's preference. Paint manufacturers may not warrant surfaces painted without their own primer, so the instructions for the selected paint system should be followed. UV-resistant paint is required for exterior applications. Polure does not warrant the paint products used and accepts no responsibility for paint-related results.