18x35x24 cm Polyurethane Decorative Pilaster Capital
Technical Specifications
| Material | Polyurethane decorative product |
|---|---|
| Surface | Decorative surface texture |
| Color | Manufacturer color information not specified; paintable. |
| Density | Belirtilmemiştir. |
| Water Absorption | below 1% |
| Dimensional Stability Test | -20 °C / +70 °C |
| Fire Class | B2 (DIN 4102-1) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 18 cm |
| Dimensions | 177 × 353 × 242 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Pilaster Column Ionic Capital)
Pilaster Capital P5025I50 is a decorative architectural element with an Ionic capital profile, designed for applications where the pilaster body integrates with the wall. Its 18x35x24 cm dimensions provide a balanced scale for completing the upper section of a pilaster arrangement. The product is not a load-bearing column; it is used to create visual continuity over an existing structural surface or decorative pilaster covering.
Pilaster Capital P5025I50 is made from rigid polyurethane with a closed-cell structure. The material used in this polyurethane decorative product has a density of 150-220 kg/m³. This construction is lighter than plaster and solid wood while helping preserve fine decorative sections. Water absorption is below 1%, reducing the risk of moisture-related deterioration in humid environments. The product is evaluated within the dimensional stability test range -20 °C / +70 °C.
The Ionic capital profile creates a regular, symmetrical transition associated with classical architecture at the top of a pilaster. After painting, the decorative surface texture of P5025I50 complements the surrounding architectural composition. The factory-primed surface is prepared for water-based or synthetic paint. The capital can therefore be matched to the wall colour or deliberately contrasted with the pilaster body.
Pilaster Capital P5025I50 can be used to complete vertical wall arrangements in entrance halls, living rooms, stair landings, hotel lobbies, restaurants and office reception areas. It can also be used at the top of pilaster compositions around windows or doors on villa and commercial building facades. UV-resistant paint is required for exterior applications. The Ionic capital may also be used on its own across broad walls; however, when installed with a pilaster body on the same axis, the classical proportions become easier to read.
Before installation, the surface must be clean, dry, even and structurally sound. If cutting is required, a 45° mitre cut is recommended. The piece is installed with polyurethane (PU) mounting adhesive, and mechanical fastening with screws is mandatory. Joints and screw heads are filled, levelled with 180-220 grit sandpaper, then finished with primer and two coats of paint. Silicone adhesive must not be used. Although the factory primer prepares the surface for painting, paint manufacturers may not provide a warranty for applications carried out without their own primer; using an additional primer is at the customer's discretion.
This polyurethane decorative product is lighter and more impact-tolerant than plaster, more resistant to moisture and decay than wood, and harder and more detailed than EPS foam. The surface can be filled, sanded and repainted. Polure does not warrant the paint system used and accepts no responsibility for the application result. Proper surface preparation, suitable paint selection and mechanical fastening help P5025I50 retain a neat appearance over time.
- Pilaster Capital P5025I50 is an Ionic capital element that completes the upper section of a pilaster arrangement
- Its 18x35x24 cm dimensions are suitable for defining wall proportions in medium-sized interiors such as entrance halls and living rooms
- It can be used as the upper finish of vertical pilaster compositions in hotel lobbies, restaurants, office reception areas and stair landings
- At villa entrances, it completes the pilaster arrangement around a door and can also be used on facades to emphasise window or door axes
- For exterior applications, the product must be painted with UV-resistant paint
- Painting the capital the same colour as the pilaster body creates a unified appearance, while a contrasting tone visually highlights the upper section
- Repeated pilasters arranged opposite one another or along the same axis can establish a classical or neoclassical composition across broad walls
- The product is decorative and does not carry structural loads; it is installed as part of a covering arrangement over an existing structural wall or column
- The application area must be cleaned of dust, grease and moisture and made clean, dry, even and structurally sound
- Check the section and installation orientation of Pilaster Capital P5025I50
- Use a 45° mitre cut where cutting is required
- Apply polyurethane (PU) mounting adhesive to the back and contact line of the piece; silicone adhesive must not be used
- After positioning the product, mechanical fastening with screws is mandatory
- For wide sections or unusual surface conditions, the connection method should be determined according to the installation area
- Fill joints and screw heads with exterior-grade filler outdoors and a suitable filler indoors
- Once dry, level the surface with 180-220 grit sandpaper
- Although the product has a factory primer, the choice of an additional primer is left to the customer; then apply two coats of water-based or synthetic paint
- UV-resistant paint must be used for exterior applications
- Clean the surface of Pilaster Capital P5025I50 with a soft, dry or slightly damp cloth
- Do not use stiff brushes, abrasive sponges, solvent-heavy cleaners or chemicals that could scratch the surface
- On exterior applications, inspect the paint surface, joints and screw points regularly
- If the paint cracks, peels or changes colour, prepare the surface properly and repaint it
- Because unpainted polyurethane may yellow under UV exposure, UV-resistant paint is mandatory for exterior applications
- Minor surface defects can be repaired with filler, sanding and repainting
Can the P5025I50 Ionic capital be used outdoors?
Yes. P5025I50 can be used in exterior facade decoration to complete the upper section of a pilaster arrangement. The product is decorative and does not carry structural loads; it must be fastened to an existing structural surface. For exterior installation, use screws together with polyurethane (PU) mounting adhesive, and seal the joints and screw points with exterior-grade filler. UV-resistant paint is mandatory because an unpainted surface may yellow under UV exposure. Facade conditions, surface condition and the paint system should be assessed before installation.
How is the Ionic capital installed and painted?
The mounting surface must be clean, dry, even and structurally sound. Make any required cuts with a 45° mitre. Position P5025I50 using polyurethane (PU) mounting adhesive, then mechanically fasten it with screws; silicone must not be used. After filling the joints and screw heads, sand the surface with 180-220 grit sandpaper. The factory primer prepares the surface for painting, but an additional primer is at the customer's discretion. Finish with two coats of water-based or synthetic paint.
How durable is P5025I50, and how much does it weigh?
The product weight of P5025I50 is not specified in this listing, so an exact kilogram figure cannot be provided. Its rigid polyurethane construction offers a lighter decorative solution than plaster and solid wood, while being harder than EPS foam. Its closed-cell structure gives it a water absorption rate below 1%. The material has been tested to maintain dimensional stability between -20 °C and +70 °C. Service life depends on correct mechanical fastening, surface preparation, the paint system and the interior or exterior conditions to which it is exposed.
Why choose a polyurethane pilaster capital instead of plaster or wood?
A polyurethane pilaster capital is lighter and more impact-tolerant than plaster. Compared with wood, it offers greater resistance to moisture and decay. Its greater hardness than EPS foam helps decorative sections and surface texture remain more consistent. The surface can also be filled, sanded and painted. However, P5025I50 is not a structural column or load-bearing element; it is used only as a visual finishing element for pilaster and facade decoration.
Which interior spaces are suitable for P5025I50?
P5025I50 can be used in entrance halls, living rooms, stair landings, bedrooms, hotel lobbies, restaurants and office reception areas. Its Ionic capital profile creates a classical or neoclassical transition above the pilaster body. Painting the capital the same colour as the pilaster body gives a more unified appearance, while a contrasting tone highlights the upper piece. The wall must be even and structurally sound, and the piece must be securely fixed with PU mounting adhesive and screws.