Polyurethane Ionic Pilaster Column Capital 60x60x41 cm
Technical Specifications
| Material | Polyurethane |
|---|---|
| Surface | Decorative, paintable surface |
| Color | Paintable surface |
| Density | 150-220 kg/m³ |
| Water Absorption | below 1% |
| Dimensional Stability Test | -20 °C / +70 °C |
| Fire Class | B2 (DIN 4102-1) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 60 cm |
| Dimensions | 595 × 595 × 408 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Pilaster Column Ionic Capital)
An ionic pilaster capital is a decorative architectural element that completes the upper section of a pilaster shaft and defines classical proportions. The P5040I model is designed to provide the balanced transition sought in column capitals, establishing the upper boundary of composition in door and window surrounds, entrance arrangements, and interior column applications.
The P5040I Pilaster Column Capital measures 60x60x41 cm; these dimensions—width, depth, and height—create a distinctive crowning effect on broad wall surfaces. The rigid, closed-cell polyurethane structure has a density of 150-220 kg/m³. The product's dimensional stability has been tested within -20 °C / +70 °C; water absorption is below 1%. Its closed-cell composition resists moisture, rot and moisture-related deterioration, making it suitable for both interior and exterior applications when finished with appropriate paint systems.
The ionic capital form creates a visual connection between the pilaster shaft and the upper architectural element. Its decorative, paintable surface adapts to various color schemes, from light classical interiors to more pronounced facade compositions. P5040I is not a load-bearing member; it functions as a decorative covering and complementary piece applied over existing load-bearing concrete, steel, or masonry elements.
The P5040I Pilaster Column Capital can be used above pilasters in entrance halls, living rooms, stairway landings, hotel lobbies, restaurants, and retail interiors. On exterior facades, it suits villa entrances, window surrounds, door compositions, and classical facade sections. The 60x60 cm broad surface dimension reads more balanced on expansive walls where fine details are not lost; the 41 cm height allows the capital to be read clearly on the facade or interior without visual dominance.
Before installation, the substrate surface is cleaned, dried, and consolidated. Where joints or intersections require cutting, 45° miter cuts are applied. The P5040I is secured with polyurethane (PU) mounting adhesive and mechanically fastened with screws. Joints are filled with filler, smoothed with 180–220 grit sandpaper, then primed and finished with two coats of paint. The factory primer prepares the surface for paint; however, the decision to apply additional primer is left to the customer, in accordance with the paint manufacturer's warranty conditions.
Compared to plaster, P5040I is lighter and more impact-resistant. Compared to wood, it is more resistant to moisture and decay. Its rigidity compared to EPS foam helps preserve fine capital details during installation and painting. UV-stable paint is mandatory for exterior exposure; Polure provides no warranty for the paint system and assumes no responsibility for paint application results.
- The P5040I Pilaster Column Capital completes the upper section of a pilaster shaft
- When placed atop decorative pilasters running along a wall, it creates a classical frame effect around doors, niches, or panels
- In an entrance hall, it emphasizes a door composition between two pilasters; on a stairway landing, it divides wall surfaces; in a hotel lobby, it reinforces architectural order behind the reception desk
- In restaurants, shops, and offices, it can be painted to match brand identity and applied at column surrounds and wall transitions
- On exterior facades, it can be added to pilasters framing villa entrances, door headers, and window surrounds
- The product is non-structural; it serves as a decorative cladding over existing columns or wall surfaces
- In exterior use, it must be painted and protected with UV-stable paint; unfinished exposure is not permitted
- The 60x60 cm dimension appears more proportionate on broad walls and wide openings, while the 41 cm height creates a noticeable yet controlled emphasis at the top
- The application surface is cleaned of dust, grease, and loose material, then brought to a clean, dry, sound condition
- Component position is marked; any required joints or corner cuts are made at 45° miter angles
- The P5040I is secured using only polyurethane (PU) mounting adhesive—silicone adhesive is not used
- In addition to adhesive bonding, mechanical fastening with screws is mandatory; screw heads and joint areas are filled with filler material
- The cured surface is smoothed with 180–220 grit sandpaper
- The factory primer provides paint readiness; additional primer application may be applied according to the paint manufacturer's system
- In the final stage, water-based or synthetic paint is applied in two coats
- For exterior facades, joint areas and fastener points must be sealed with exterior-grade filler, and UV-stable paint must be used
- The P5040I Pilaster Column Capital can be cleaned with a soft dry cloth or lightly dampened cloth
- Wire brushes, stiff sponges, and abrasive powders that could scratch the surface should not be used
- Harsh cleaning products containing solvents may damage the painted surface and should be avoided
- On exterior facades, the paint film should be periodically inspected visually
- If color fading, surface damage, or joint separation is observed, the affected area should be cleaned and renewed with appropriate filler, primer, and paint system
Can the P5040I Pilaster Column Capital be used on exterior facades?
Yes, the product is suitable for exterior facade applications including villa entrances, door surrounds, window compositions, and pilaster caps. For exterior use, the surface must be painted and protected with UV-stable paint. Joint areas and fastener points must be sealed with exterior-grade filler. The product is decorative and non-structural; it functions as cladding applied over existing load-bearing concrete, steel, or masonry elements.
How is the P5040I installed and what paint should be applied?
After the surface is cleaned, dried, and consolidated, necessary cuts are made at 45° miter angles. The product is secured with polyurethane (PU) mounting adhesive and mechanically fastened with screws. Joints are filled with filler and smoothed with 180–220 grit sandpaper. The factory primer prepares the surface for paint; additional primer may be applied according to the paint manufacturer's requirements. Water-based or synthetic paint is recommended for the final coat.
What are the density and temperature resistance specifications of the P5040I?
The P5040I features a closed-cell rigid PU structure with a density of 150-220 kg/m³. The product is assessed within the dimensional stability test range -20 °C / +70 °C. Water absorption is below 1%. This value does not indicate absolute waterproofing; for exterior facade application, paint, joint sealing, and connection points must be properly protected.
Why choose P5040I over plaster, wood, or expanded polystyrene?
Compared to plaster, P5040I is lighter and more impact-resistant. Compared to wood, it is more resistant to moisture, rot and moisture-related deterioration. Its greater rigidity compared to EPS foam helps preserve the fine details of the ionic capital form during installation and painting. Additionally, the surface can be filled, sanded, and repainted. The product is non-structural and serves only as decorative cladding.
What pilaster widths and room dimensions is the P5040I suited for?
The P5040I, with dimensions of 60x60x41 cm, is suitable for broad wall surfaces, wide openings, and prominent pilaster compositions. The 41 cm height produces a readable capital effect above the pilaster shaft. It can be used in living rooms, entrance halls, hotel lobbies, restaurants, and villa facades. Before installation, the pilaster shaft width, surface evenness, and joint points should be verified.