28x56x26 cm Polyurethane Pilaster Column Decorative Element

A pilaster column is a decorative architectural element that gives a wall or façade the visual effect of a column. The P5040D50 model helps create a neat upper section and transition to the shaft in vertical pilaster applications. Its 28 x 56 x 26 cm dimensions provide balanced proportions around entrances, across wall sections, and within column compositions. The product does not carry structural loads; it is used as a decorative covering and architectural accent over an existing supporting surface.

This model features a rigid, closed-cell polyurethane structure. With a density of 150-220 kg/m³, the material is lighter than plaster, concrete, or solid wood while helping the pilaster retain its shape. No loss of form is expected within a temperature range of -100 °C / +80 °C. Water absorption is below 1%, providing an advantage in humid environments and in exterior applications when used with a suitable paint system. Its high dimensional stability reduces the risk of shrinkage, expansion, and warping.

With its specified dimensions, the P5040D50 pilaster column can be adapted to different compositions on narrow or wide surfaces. A vertical installation strengthens the architectural frame around a door or window, while a single unit can create the impression of a classical column on a wall. Since no specific motif or colour is stated for the surface, the product can be finished to match the overall design palette. The factory primer prepares the surface for water-based or synthetic paint. An additional primer is optional; the paint manufacturer's application and warranty requirements should also be observed.

The pilaster column can be used indoors on living room walls, in entrance halls, dining areas, around bedroom headboards, and in hotel lobbies. In office or restaurant projects, it can highlight column surfaces, add rhythm to wall sections, and give door openings a classical frame effect. Outdoors, it can be applied around villa entrances, window surrounds, door compositions, and layered façade designs. For exterior use, it should not be left unpainted and must be protected with UV-resistant exterior paint.

Before installation, the surface must be clean, dry, sound, and free of dust. Where necessary, joints can be prepared with 45° mitre cuts. The product is fixed with polyurethane (PU) mounting adhesive; screws and suitable mechanical fasteners are also mandatory according to the application conditions. Wider pieces or sections subject to connection loads require additional mechanical support to be planned. Joints are filled with filler, smoothed with 180-220 grit sandpaper, and then finished with primer and two coats of paint. Silicone adhesive must not be used.

As a polyurethane decorative product, the P5040D50 is lighter and more impact-tolerant than plaster, and more resistant to moisture, rot, and insects than wood. Compared with EPS foam, it provides a harder surface and more controlled detailing. Its difficult-to-ignite structure, with a tendency to self-extinguish when the flame source is removed, may be considered when selecting the product; this does not indicate a fire-resistance period or project certification. With correct installation, suitable paint, and regular surface care, the pilaster application can serve as a decorative solution that can be renewed over time.