Polyurethane Decorative Product 17x34x56 cm Pilaster Column Base
Technical Specifications
| Material | Poliüretan dekorasyon ürünü |
|---|---|
| Surface | Yüzey dokusu belirtilmemiştir. |
| Color | Renk bilgisi belirtilmemiştir; boyanabilir. |
| Density | Belirtilmemiştir. |
| Water Absorption | below 1% |
| Service Temperature | -100 °C / +80 °C |
| Fire Class | B2 (flame retardant) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 17 cm |
| Dimensions | 169 × 337 × 555 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Pilaster Column Base Plinth)
The pilaster column base is a decorative architectural element that completes the lower section of a pilaster installation near the floor. Model P5030B50 creates a more orderly transition between the column body and the floor or lower decorative section. The product is not a structural element; it is applied as a decorative covering over an existing wall, column or pilaster surface. It helps classical architectural details form a cohesive composition in interiors and exterior facades.
The P5030B50 measures 17 cm in width, 34 cm in length and 56 cm in height. Rather than functioning as a broad wall moulding, these dimensions create a compact base form that defines the lower section of a pilaster column. The closed-cell rigid PU has a density of 150-220 kg/m³ (production target ~160 kg/m³). The material retains its form between -100 °C / +80 °C, with water absorption below 1%. Its high dimensional stability helps preserve its decorative appearance over time when the surface is properly prepared and the product is installed correctly.
The design impact of the column base comes from making the part of the pilaster body that meets the floor look more defined and architecturally complete. The 17x34 cm base dimensions allow the product to be positioned around entrances, on living room walls or within facade pilaster compositions. The factory-primed surface is prepared for water-based or synthetic paint. Additional primer is optional; the paint manufacturer's warranty conditions should be reviewed separately. Polure does not warrant the paint system used and accepts no responsibility for its results.
The pilaster column base can be used at villa entrances, around doors with decorative columns, in hotel lobbies, restaurant reception areas and classically styled offices. Indoors, it can connect wall pilasters to the floor in living rooms, entrance halls or high-ceilinged corridors. Outdoors, it can be added to pilaster compositions around windows and doors. For exterior applications, the product must not be left unpainted. A UV-resistant exterior paint should be used, and joints and screw heads should be covered with exterior-grade filler.
For installation, the surface must be clean, dry, sound and even. The product is prepared with 45° mitre cuts; polyurethane (PU) mounting adhesive is used for bonding, and mechanical fixing with screws is mandatory. Silicone adhesive must not be used. Joints are filled with filler, smoothed with 180-220 grit sandpaper, optionally primed, and painted with two coats. Rigid PU is lighter and more impact-resistant than plaster, more resistant to moisture and rot than wood, and harder than EPS foam, making it better suited to retaining fine decorative details. In terms of reaction to fire, it is a B2-class, difficult-to-ignite material.
- The pilaster column base is used to complete the point where the column body meets the floor or a lower decorative line
- With its 17x34x56 cm dimensions, it can be used on pilasters positioned on either side of an entrance door, in classical column installations on living room walls and in high-ceilinged corridors
- At villa entrances, painting the base in the same tone as the wall creates an integrated appearance, while a contrasting colour can emphasise the column base
- It defines the lower section of pilaster compositions in hotel lobbies, restaurant reception areas and classically designed offices
- It can also be used beneath pilasters around windows or doors on exterior facades
- UV-resistant paint is required for exterior applications, and joints and screw points must be covered with exterior-grade filler
- The product is decorative and must not be used to carry structural loads
- Before installation, remove dust, grease, loose paint and moisture from the surface so that it is clean, dry, sound and even
- Measure the base according to the pilaster position and, if necessary, prepare it with 45° mitre cuts
- Apply polyurethane (PU) mounting adhesive to the back; silicone adhesive must not be used
- After positioning the product, mechanical fixing with screws is mandatory
- Cover screw heads and joint lines with suitable filler
- Allow drying and complete surface preparation according to the instructions for the products used
- Then sand with 180-220 grit sandpaper, assess whether additional primer is needed and apply two coats of paint
- For exterior applications, use UV-resistant paint and protect the joints with exterior-grade filler
- Wipe the surface of the pilaster column base gently with a soft, slightly damp cloth
- Do not use abrasive cleaning powders, stiff brushes, solvent-based products or methods that could scratch the surface
- For exterior applications, maintenance intervals depend on sunlight, rainfall, soiling and the selected paint system
- If the paint fades or cracks, or if the surface requires repair, remove loose areas, carry out the necessary filling and sanding, and refinish with a suitable paint
- Follow the paint manufacturer's maintenance and recoating instructions
Can the P5030B50 pilaster column base be used outdoors?
Yes. The product can be used to complete the lower section of pilaster columns in exterior decoration. For outdoor installation, the surface must be sound and dry, and mechanical fixing with screws is required in addition to PU mounting adhesive. The product must not be left unpainted; it should be protected with UV-resistant exterior paint. Joints and screw heads must be covered with exterior-grade filler. The base is decorative and must not carry structural loads like a column or wall.
How is the pilaster column base installed and painted?
First, prepare a clean, dry and even surface. Measure the product, make 45° mitre cuts if required, and use polyurethane (PU) mounting adhesive. Mechanical fixing with screws is mandatory; silicone must not be used. Fill the joints and smooth them with 180-220 grit sandpaper. The factory primer prepares the surface for painting, while additional primer is optional. Finish by applying two coats of suitable paint.
What are the weight and service life of the P5030B50?
The product's net weight should not be calculated from its stated dimensions; its own weight and the loads on the fixings must be considered during installation. The rigid PU has a density of 150-220 kg/m³ (production target ~160 kg/m³), a temperature range of -100 °C / +80 °C and water absorption below 1%. These properties can help preserve the decorative appearance over time when the surface is properly prepared, mechanically fixed and maintained with suitable paint. Actual service life depends on the application environment and paint system.
Why choose rigid PU for a pilaster base instead of plaster or wood?
Rigid PU is lighter and more impact-resistant than plaster. Compared with wood, its greater resistance to moisture and rot offers advantages in interior and exterior applications. Its closed-cell structure keeps water absorption below 1%, while high dimensional stability reduces the risk of shrinkage, expansion and warping. It is harder than EPS foam and better suited to retaining the shape of decorative profiles. However, the product is not a structural load-bearing element.
Which pilasters or column bodies are compatible with the P5030B50?
P5030B50 is designed to complete the lower section of pilaster column installations within its product range. However, it should not be assumed to fit every column body automatically. The 17x34 cm base dimensions, 56 cm height and the actual dimensions of the installation surface must be checked before installation. The joint line, surface flatness and mechanical fixing points should be assessed on site. Where compatibility is uncertain, verify the dimensions before starting the installation.
Similar Products(Pilaster Column Base Plinth)
The pilaster column base is a decorative architectural element that completes the lower section of a pilaster installation near the floor. Model P5030B50 creates a more orderly transition between the column body and the floor or lower decorative section. The product is not a structural element; it is applied as a decorative covering over an existing wall, column or pilaster surface. It helps classical architectural details form a cohesive composition in interiors and exterior facades.
The P5030B50 measures 17 cm in width, 34 cm in length and 56 cm in height. Rather than functioning as a broad wall moulding, these dimensions create a compact base form that defines the lower section of a pilaster column. The closed-cell rigid PU has a density of 150-220 kg/m³ (production target ~160 kg/m³). The material retains its form between -100 °C / +80 °C, with water absorption below 1%. Its high dimensional stability helps preserve its decorative appearance over time when the surface is properly prepared and the product is installed correctly.
The design impact of the column base comes from making the part of the pilaster body that meets the floor look more defined and architecturally complete. The 17x34 cm base dimensions allow the product to be positioned around entrances, on living room walls or within facade pilaster compositions. The factory-primed surface is prepared for water-based or synthetic paint. Additional primer is optional; the paint manufacturer's warranty conditions should be reviewed separately. Polure does not warrant the paint system used and accepts no responsibility for its results.
The pilaster column base can be used at villa entrances, around doors with decorative columns, in hotel lobbies, restaurant reception areas and classically styled offices. Indoors, it can connect wall pilasters to the floor in living rooms, entrance halls or high-ceilinged corridors. Outdoors, it can be added to pilaster compositions around windows and doors. For exterior applications, the product must not be left unpainted. A UV-resistant exterior paint should be used, and joints and screw heads should be covered with exterior-grade filler.
For installation, the surface must be clean, dry, sound and even. The product is prepared with 45° mitre cuts; polyurethane (PU) mounting adhesive is used for bonding, and mechanical fixing with screws is mandatory. Silicone adhesive must not be used. Joints are filled with filler, smoothed with 180-220 grit sandpaper, optionally primed, and painted with two coats. Rigid PU is lighter and more impact-resistant than plaster, more resistant to moisture and rot than wood, and harder than EPS foam, making it better suited to retaining fine decorative details. In terms of reaction to fire, it is a B2-class, difficult-to-ignite material.
- The pilaster column base is used to complete the point where the column body meets the floor or a lower decorative line
- With its 17x34x56 cm dimensions, it can be used on pilasters positioned on either side of an entrance door, in classical column installations on living room walls and in high-ceilinged corridors
- At villa entrances, painting the base in the same tone as the wall creates an integrated appearance, while a contrasting colour can emphasise the column base
- It defines the lower section of pilaster compositions in hotel lobbies, restaurant reception areas and classically designed offices
- It can also be used beneath pilasters around windows or doors on exterior facades
- UV-resistant paint is required for exterior applications, and joints and screw points must be covered with exterior-grade filler
- The product is decorative and must not be used to carry structural loads
- Before installation, remove dust, grease, loose paint and moisture from the surface so that it is clean, dry, sound and even
- Measure the base according to the pilaster position and, if necessary, prepare it with 45° mitre cuts
- Apply polyurethane (PU) mounting adhesive to the back; silicone adhesive must not be used
- After positioning the product, mechanical fixing with screws is mandatory
- Cover screw heads and joint lines with suitable filler
- Allow drying and complete surface preparation according to the instructions for the products used
- Then sand with 180-220 grit sandpaper, assess whether additional primer is needed and apply two coats of paint
- For exterior applications, use UV-resistant paint and protect the joints with exterior-grade filler
- Wipe the surface of the pilaster column base gently with a soft, slightly damp cloth
- Do not use abrasive cleaning powders, stiff brushes, solvent-based products or methods that could scratch the surface
- For exterior applications, maintenance intervals depend on sunlight, rainfall, soiling and the selected paint system
- If the paint fades or cracks, or if the surface requires repair, remove loose areas, carry out the necessary filling and sanding, and refinish with a suitable paint
- Follow the paint manufacturer's maintenance and recoating instructions
Can the P5030B50 pilaster column base be used outdoors?
Yes. The product can be used to complete the lower section of pilaster columns in exterior decoration. For outdoor installation, the surface must be sound and dry, and mechanical fixing with screws is required in addition to PU mounting adhesive. The product must not be left unpainted; it should be protected with UV-resistant exterior paint. Joints and screw heads must be covered with exterior-grade filler. The base is decorative and must not carry structural loads like a column or wall.
How is the pilaster column base installed and painted?
First, prepare a clean, dry and even surface. Measure the product, make 45° mitre cuts if required, and use polyurethane (PU) mounting adhesive. Mechanical fixing with screws is mandatory; silicone must not be used. Fill the joints and smooth them with 180-220 grit sandpaper. The factory primer prepares the surface for painting, while additional primer is optional. Finish by applying two coats of suitable paint.
What are the weight and service life of the P5030B50?
The product's net weight should not be calculated from its stated dimensions; its own weight and the loads on the fixings must be considered during installation. The rigid PU has a density of 150-220 kg/m³ (production target ~160 kg/m³), a temperature range of -100 °C / +80 °C and water absorption below 1%. These properties can help preserve the decorative appearance over time when the surface is properly prepared, mechanically fixed and maintained with suitable paint. Actual service life depends on the application environment and paint system.
Why choose rigid PU for a pilaster base instead of plaster or wood?
Rigid PU is lighter and more impact-resistant than plaster. Compared with wood, its greater resistance to moisture and rot offers advantages in interior and exterior applications. Its closed-cell structure keeps water absorption below 1%, while high dimensional stability reduces the risk of shrinkage, expansion and warping. It is harder than EPS foam and better suited to retaining the shape of decorative profiles. However, the product is not a structural load-bearing element.
Which pilasters or column bodies are compatible with the P5030B50?
P5030B50 is designed to complete the lower section of pilaster column installations within its product range. However, it should not be assumed to fit every column body automatically. The 17x34 cm base dimensions, 56 cm height and the actual dimensions of the installation surface must be checked before installation. The joint line, surface flatness and mechanical fixing points should be assessed on site. Where compatibility is uncertain, verify the dimensions before starting the installation.