Poliüretan Decorative Product 11x22x36 cm Pilaster Base
Technical Specifications
| Material | Poliüretan dekorasyon ürünü |
|---|---|
| Surface | Belirtilmemiş |
| Color | Belirtilmemiş; boyanabilir |
| Density | Belirtilmemiş |
| Water Absorption | below 1% |
| Service Temperature | -100 °C / +80 °C |
| Fire Class | B2 (flame retardant) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 11 cm |
| Dimensions | 112 × 224 × 362 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Pilaster Column Base Plinth)
This pilaster column base is a decorative architectural element that completes the lower section of a pilaster body near the floor. Made from polyurethane and identified by code P5020B50, it creates a more cohesive transition at the bottom of a column installation and visually completes the vertical decorative composition toward the floor. The dimensions 11x22x36 cm are listed as width, length and height, so they should be checked against the actual installation area before ordering.
P5020B50 is manufactured from rigid polyurethane with a closed-cell structure. With a density of 150-220 kg/m³, it offers a lighter decorative solution than comparable plaster, concrete and solid wood elements. Water absorption is below 1%, which makes the product suitable for consideration in humid environments; however, the surface coating and joint details must be assessed separately for exterior conditions. The material retains its form within a temperature range of -100 °C to +80 °C. This product is decorative and does not carry structural loads.
The design value of this pilaster base lies not only in its role as a decorative detail, but also in the orderly transition it creates between the pilaster body and the floor or plinth surface. In classical façade designs, it can be used with pilasters around windows and doors. Indoors, it helps define the lower section of a column composition in entrance halls, living rooms, stair landings and high-ceilinged passageways. Its paintable surface allows it to match existing walls, wood-look décor and other polyurethane architectural elements.
P5020B50 can be used for pilaster installations joined to walls indoors, as well as in hotel lobbies, restaurant entrances, classically styled living rooms and office reception areas. When selected for exterior use, it should be positioned as the lower component of a decorative pilaster arrangement around a window or door. Exterior applications require UV-resistant paint, and joints and screw points must be sealed with exterior-grade filler. Unpainted polyurethane may yellow under prolonged sunlight.
Before installation, the surface must be clean, dry and sound. After checking the measurements, any required cuts should be prepared with a 45° mitre. Use polyurethane (PU) mounting adhesive for P5020B50; silicone adhesive is not suitable. Mechanical fixing with screws is also required in addition to adhesive. The finishing process includes filler, 180-220 grit sanding, optional additional primer and two coats of paint. The factory primer prepares the surface for painting, but paint manufacturers may not provide a warranty for applications made without their own primer. Whether an additional primer is required is left to the customer and installation team. Polure does not guarantee the paints used and accepts no responsibility in this regard.
- The P5020B50 pilaster column base is used to finish the section where a vertical pilaster body meets the floor
- Indoors, it can complete the lower part of a pilaster in entrance halls, living rooms, stair landings, bedroom transitions and high-ceilinged corridors
- In hotel lobbies, restaurant entrances and classically designed office reception areas, it makes vertical decoration around doors more defined
- It can also be used with pilasters beside windows or doors in villa and residential projects
- On façades, the product can serve as the lower component of a decorative pilaster arrangement around windows, doors and entrances
- For exterior use, apply UV-resistant paint and seal joint lines and screw heads with exterior-grade filler
- The 11x22x36 cm dimensions should be checked against the existing pilaster body and floor measurements before use in narrow or medium-scale pilaster compositions
- Before installation, measure the pilaster body, floor and wall junction, then check the orientation and seating surface of the P5020B50 base
- The surface must be clean, dry, sound and free from dust
- If cutting is required, use a 45° mitre
- Apply polyurethane (PU) mounting adhesive to the back of the product, position it and mechanically fix it with screws; do not use silicone adhesive
- Cover screw heads and joint lines with suitable filler
- Once dry, smooth the surface with 180-220 grit sandpaper
- The factory primer prepares the surface for paint, while an additional primer may be used according to the paint manufacturer's system
- Apply two coats of water-based or synthetic paint
- UV-resistant paint must be used on exterior façades
- Clean the P5020B50 surface with a soft, slightly damp cloth
- Avoid hard brushes, abrasive creams, solvent-based cleaners and any treatment that could scratch the surface
- On exterior façades, inspect the paint layer, joint filler and screw points periodically
- If the paint cracks, blisters or begins to peel, clean the affected area and restore it with a suitable exterior paint system
- Do not apply impact or concentrated pressure to the base during cleaning
Can P5020B50 be used outdoors?
Yes. P5020B50 can be used as the lower base of a decorative pilaster column arrangement on an exterior façade. UV-resistant paint must be applied after installation; unpainted polyurethane may yellow in direct sunlight. The base is not a structural support and does not perform the load-bearing function of a column. Seal joints and screw points with exterior-grade filler, and inspect the surface and paint system according to exposure to rain, sunlight and temperature changes.
How is a pilaster column base installed and painted?
First, clean and dry the surface, then check all measurements. Prepare any required cuts with a 45° mitre. Use polyurethane (PU) mounting adhesive during installation; silicone must not be used. Mechanical fixing with screws is required in addition to adhesive. Fill the joints, smooth them with 180-220 grit sandpaper and use an additional primer if required by the paint system. Finish by applying two coats of water-based or synthetic paint.
How durable is P5020B50, and what does it weigh?
The product's net weight is not specified in the available product information, so an estimated kilogram value cannot be provided. Rigid polyurethane has a closed-cell structure and a density of 150-220 kg/m³, making it a lightweight and durable material for decorative applications. Water absorption is below 1%, and the material retains its form between -100 °C and +80 °C. Long-term performance depends on correct mechanical fixing, paint selection and installation conditions.
What advantages does it have over plaster or wood?
A polyurethane pilaster base is lighter than plaster and more tolerant of impact as a decorative element. Unlike wood, it does not carry the same risk of moisture-related rot and deformation; its closed-cell structure gives it a water absorption rate below 1%. It can be cut, filled, sanded and painted. However, it is not intended to provide structural support and should be used only as a decorative finish and architectural complement.
Which pilasters or columns is P5020B50 compatible with?
P5020B50 belongs to the pilaster column base range and is designed to complete the lower section of a pilaster body. However, it should not be assumed to fit every pilaster profile automatically. The 11x22x36 cm dimensions must be compared with the existing body, wall and floor, while the width, height and seating surface should be checked before installation. Compatibility depends on the actual cross-section of the selected pilaster profile and the installation details.
Similar Products(Pilaster Column Base Plinth)
This pilaster column base is a decorative architectural element that completes the lower section of a pilaster body near the floor. Made from polyurethane and identified by code P5020B50, it creates a more cohesive transition at the bottom of a column installation and visually completes the vertical decorative composition toward the floor. The dimensions 11x22x36 cm are listed as width, length and height, so they should be checked against the actual installation area before ordering.
P5020B50 is manufactured from rigid polyurethane with a closed-cell structure. With a density of 150-220 kg/m³, it offers a lighter decorative solution than comparable plaster, concrete and solid wood elements. Water absorption is below 1%, which makes the product suitable for consideration in humid environments; however, the surface coating and joint details must be assessed separately for exterior conditions. The material retains its form within a temperature range of -100 °C to +80 °C. This product is decorative and does not carry structural loads.
The design value of this pilaster base lies not only in its role as a decorative detail, but also in the orderly transition it creates between the pilaster body and the floor or plinth surface. In classical façade designs, it can be used with pilasters around windows and doors. Indoors, it helps define the lower section of a column composition in entrance halls, living rooms, stair landings and high-ceilinged passageways. Its paintable surface allows it to match existing walls, wood-look décor and other polyurethane architectural elements.
P5020B50 can be used for pilaster installations joined to walls indoors, as well as in hotel lobbies, restaurant entrances, classically styled living rooms and office reception areas. When selected for exterior use, it should be positioned as the lower component of a decorative pilaster arrangement around a window or door. Exterior applications require UV-resistant paint, and joints and screw points must be sealed with exterior-grade filler. Unpainted polyurethane may yellow under prolonged sunlight.
Before installation, the surface must be clean, dry and sound. After checking the measurements, any required cuts should be prepared with a 45° mitre. Use polyurethane (PU) mounting adhesive for P5020B50; silicone adhesive is not suitable. Mechanical fixing with screws is also required in addition to adhesive. The finishing process includes filler, 180-220 grit sanding, optional additional primer and two coats of paint. The factory primer prepares the surface for painting, but paint manufacturers may not provide a warranty for applications made without their own primer. Whether an additional primer is required is left to the customer and installation team. Polure does not guarantee the paints used and accepts no responsibility in this regard.
- The P5020B50 pilaster column base is used to finish the section where a vertical pilaster body meets the floor
- Indoors, it can complete the lower part of a pilaster in entrance halls, living rooms, stair landings, bedroom transitions and high-ceilinged corridors
- In hotel lobbies, restaurant entrances and classically designed office reception areas, it makes vertical decoration around doors more defined
- It can also be used with pilasters beside windows or doors in villa and residential projects
- On façades, the product can serve as the lower component of a decorative pilaster arrangement around windows, doors and entrances
- For exterior use, apply UV-resistant paint and seal joint lines and screw heads with exterior-grade filler
- The 11x22x36 cm dimensions should be checked against the existing pilaster body and floor measurements before use in narrow or medium-scale pilaster compositions
- Before installation, measure the pilaster body, floor and wall junction, then check the orientation and seating surface of the P5020B50 base
- The surface must be clean, dry, sound and free from dust
- If cutting is required, use a 45° mitre
- Apply polyurethane (PU) mounting adhesive to the back of the product, position it and mechanically fix it with screws; do not use silicone adhesive
- Cover screw heads and joint lines with suitable filler
- Once dry, smooth the surface with 180-220 grit sandpaper
- The factory primer prepares the surface for paint, while an additional primer may be used according to the paint manufacturer's system
- Apply two coats of water-based or synthetic paint
- UV-resistant paint must be used on exterior façades
- Clean the P5020B50 surface with a soft, slightly damp cloth
- Avoid hard brushes, abrasive creams, solvent-based cleaners and any treatment that could scratch the surface
- On exterior façades, inspect the paint layer, joint filler and screw points periodically
- If the paint cracks, blisters or begins to peel, clean the affected area and restore it with a suitable exterior paint system
- Do not apply impact or concentrated pressure to the base during cleaning
Can P5020B50 be used outdoors?
Yes. P5020B50 can be used as the lower base of a decorative pilaster column arrangement on an exterior façade. UV-resistant paint must be applied after installation; unpainted polyurethane may yellow in direct sunlight. The base is not a structural support and does not perform the load-bearing function of a column. Seal joints and screw points with exterior-grade filler, and inspect the surface and paint system according to exposure to rain, sunlight and temperature changes.
How is a pilaster column base installed and painted?
First, clean and dry the surface, then check all measurements. Prepare any required cuts with a 45° mitre. Use polyurethane (PU) mounting adhesive during installation; silicone must not be used. Mechanical fixing with screws is required in addition to adhesive. Fill the joints, smooth them with 180-220 grit sandpaper and use an additional primer if required by the paint system. Finish by applying two coats of water-based or synthetic paint.
How durable is P5020B50, and what does it weigh?
The product's net weight is not specified in the available product information, so an estimated kilogram value cannot be provided. Rigid polyurethane has a closed-cell structure and a density of 150-220 kg/m³, making it a lightweight and durable material for decorative applications. Water absorption is below 1%, and the material retains its form between -100 °C and +80 °C. Long-term performance depends on correct mechanical fixing, paint selection and installation conditions.
What advantages does it have over plaster or wood?
A polyurethane pilaster base is lighter than plaster and more tolerant of impact as a decorative element. Unlike wood, it does not carry the same risk of moisture-related rot and deformation; its closed-cell structure gives it a water absorption rate below 1%. It can be cut, filled, sanded and painted. However, it is not intended to provide structural support and should be used only as a decorative finish and architectural complement.
Which pilasters or columns is P5020B50 compatible with?
P5020B50 belongs to the pilaster column base range and is designed to complete the lower section of a pilaster body. However, it should not be assumed to fit every pilaster profile automatically. The 11x22x36 cm dimensions must be compared with the existing body, wall and floor, while the width, height and seating surface should be checked before installation. Compatibility depends on the actual cross-section of the selected pilaster profile and the installation details.