55x55x94 cm Polyurethane Decorative Pilaster Base
Technical Specifications
| Material | Poliüretan dekorasyon ürünü |
|---|---|
| Surface | Dekoratif yüzey |
| Color | Boyanabilir; mevcut renk belirtilmemiştir |
| Density | Belirtilmemiştir |
| Water Absorption | below 1% |
| Service Temperature | -100 °C / +80 °C |
| Fire Class | B2 (flame retardant) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 55 cm |
| Dimensions | 554 × 554 × 940 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Pilaster Column Base Plinth)
The P5050B Pilaster Column Base is a decorative architectural element that completes the lower section of a pilaster column near the floor. With a 55x55 cm base and a height of 94 cm, it creates a pronounced plinth effect in entrances, facade compositions and large interior walls. The product is designed as a decorative covering applied over an existing surface or structural system, not to carry structural loads.
Rigid polyurethane offers a lightweight, moisture-resistant material with a closed-cell structure. The density of the P5050B is not specified individually; the technical range for this material group is 150-220 kg/m³. Water absorption is below 1%. The material can retain its form between -100 °C and +80 °C and provides high dimensional stability. These properties make the base suitable for interior applications and, with an appropriate paint system, for exterior facade use as well.
The decorative surface of the Pilaster Column Base helps create a more balanced and finished appearance at the lower end of a pilaster installation. The 55 cm square base gives the 94 cm high piece a visual foundation, making it particularly effective in high-ceilinged rooms, entrance halls and around large facade openings. Its paintable surface allows the base to coordinate with the column, wall and facade colours specified in the architectural project.
For interior applications, it can be used with a pilaster shaft on living room walls, hotel lobbies, restaurant entrances and office reception areas. On villa and detached-house facades, it can define the lower section of a pilaster arrangement around a window or door. For exterior use, it should not be left unpainted and must be protected with a UV-resistant exterior paint. The base does not replace a structural column; it is used as a decorative layer in front of an existing concrete, steel or masonry surface.
Before installation, the surface must be clean, dry and sound. The product is fixed with polyurethane (PU) mounting adhesive and secured with screws for mechanical safety; silicone adhesive must not be used. Joints and screw points can be filled with suitable filler, then sanded with 180-220 grit sandpaper before applying primer and two coats of paint. The factory primer prepares the surface for painting, but paint manufacturers may not provide a warranty for applications carried out without using their own primer. Additional primer is therefore optional, and application responsibility rests with the customer. Compared with plaster, polyurethane is lighter and more resistant to breakage; compared with wood, it offers greater resistance to moisture and decay, helping decorative details to be installed efficiently.
- The P5050B Pilaster Column Base is used to define the lower section of a pilaster installation where it meets the floor
- In living rooms, it can be installed with pilaster shafts in front of walls to create a classical architectural rhythm
- It provides a coordinated lower finish with wall cladding in entrance halls, stair landings, hotel lobbies, restaurant reception areas and office reception spaces
- The 55x55 cm base is better balanced on wide wall surfaces and in high-ceilinged rooms; in narrow areas, the available passage width should be considered before installation
- On villa and detached-house facades, it can be used at the bottom of a pilaster arrangement around a door or window
- For exterior applications, the surface must be coated with UV-resistant paint, and joints and screw points should be sealed with exterior-grade filler
- The product is decorative and does not carry the load of a column or any other structural element
- Before installation, remove dust, grease and loose layers from the application surface; it must be clean, dry and sound
- Mark the position of the base after checking that it is aligned with the pilaster shaft
- If required, a 45° mitre cut should be made only when it matches the joint detail specified in the project
- Apply P5050B to the surface with polyurethane (PU) mounting adhesive and use screws for mechanical fastening
- Do not use silicone adhesive
- Cover screw heads and joint lines with filler
- Once dry, smooth the surface with 180-220 grit sandpaper; then apply additional primer if required and apply two coats of paint
- UV-resistant paint is mandatory for exterior applications
- Clean the surface with a soft, dry or slightly damp cloth
- Avoid abrasive creams, solvents, stiff brushes and high-pressure cleaning
- Painted surfaces should be maintained according to the instructions for the paint system used
- For exterior applications, inspect joints, screw points and the painted surface regularly
- If cracks or impact damage appear, the area can be filled, sanded and repainted
Can P5050B be used outdoors?
Yes. P5050B can be used as a decorative base in exterior facade pilaster applications. The application surface must be sound, and the product should be secured with PU mounting adhesive and screws. It must not be left unpainted; it should be coated with a UV-resistant paint suitable for exterior use. Joints and screw heads should be sealed with exterior-grade filler. The product is not a structural column; it is installed as a decorative covering over an existing structural surface.
How is the pilaster column base installed and painted?
Install the base on a clean, dry and sound surface using polyurethane (PU) mounting adhesive and screws. Do not use silicone. Fill the joint lines and screw heads, then smooth them with 180-220 grit sandpaper. The factory primer prepares the surface for painting; additional primer is optional. Finish by applying two coats of water-based or synthetic paint.
What are the product's density and temperature resistance?
A separate density value is not specified for P5050B. The density range for the rigid polyurethane material group used is 150-220 kg/m³. Thanks to its closed-cell structure, the material has water absorption below 1%. According to the technical material data, it can retain its form between -100 °C and +80 °C. The product is decorative and is not intended to carry structural loads.
What advantages does it offer over plaster or wood?
Polyurethane provides a lighter decorative solution than plaster and solid wood. It has a lower risk of breakage than plaster and is more resistant to moisture, decay and insect damage than wood. Its closed-cell structure gives it water absorption below 1%. The surface can also be filled, sanded and painted, allowing minor surface damage to be repaired after installation.
Which pilaster applications is P5050B suitable for?
P5050B is suitable for creating a plinth appearance near the floor or lower section of a pilaster column. It can be used in interior spaces such as entrance halls, living rooms, hotel lobbies, restaurants and offices. It can also be used as the lower component of a pilaster arrangement on villa and detached-house facades. The 55x55 cm base and 94 cm height require the wall and passage area to be measured in advance.
Similar Products(Pilaster Column Base Plinth)
The P5050B Pilaster Column Base is a decorative architectural element that completes the lower section of a pilaster column near the floor. With a 55x55 cm base and a height of 94 cm, it creates a pronounced plinth effect in entrances, facade compositions and large interior walls. The product is designed as a decorative covering applied over an existing surface or structural system, not to carry structural loads.
Rigid polyurethane offers a lightweight, moisture-resistant material with a closed-cell structure. The density of the P5050B is not specified individually; the technical range for this material group is 150-220 kg/m³. Water absorption is below 1%. The material can retain its form between -100 °C and +80 °C and provides high dimensional stability. These properties make the base suitable for interior applications and, with an appropriate paint system, for exterior facade use as well.
The decorative surface of the Pilaster Column Base helps create a more balanced and finished appearance at the lower end of a pilaster installation. The 55 cm square base gives the 94 cm high piece a visual foundation, making it particularly effective in high-ceilinged rooms, entrance halls and around large facade openings. Its paintable surface allows the base to coordinate with the column, wall and facade colours specified in the architectural project.
For interior applications, it can be used with a pilaster shaft on living room walls, hotel lobbies, restaurant entrances and office reception areas. On villa and detached-house facades, it can define the lower section of a pilaster arrangement around a window or door. For exterior use, it should not be left unpainted and must be protected with a UV-resistant exterior paint. The base does not replace a structural column; it is used as a decorative layer in front of an existing concrete, steel or masonry surface.
Before installation, the surface must be clean, dry and sound. The product is fixed with polyurethane (PU) mounting adhesive and secured with screws for mechanical safety; silicone adhesive must not be used. Joints and screw points can be filled with suitable filler, then sanded with 180-220 grit sandpaper before applying primer and two coats of paint. The factory primer prepares the surface for painting, but paint manufacturers may not provide a warranty for applications carried out without using their own primer. Additional primer is therefore optional, and application responsibility rests with the customer. Compared with plaster, polyurethane is lighter and more resistant to breakage; compared with wood, it offers greater resistance to moisture and decay, helping decorative details to be installed efficiently.
- The P5050B Pilaster Column Base is used to define the lower section of a pilaster installation where it meets the floor
- In living rooms, it can be installed with pilaster shafts in front of walls to create a classical architectural rhythm
- It provides a coordinated lower finish with wall cladding in entrance halls, stair landings, hotel lobbies, restaurant reception areas and office reception spaces
- The 55x55 cm base is better balanced on wide wall surfaces and in high-ceilinged rooms; in narrow areas, the available passage width should be considered before installation
- On villa and detached-house facades, it can be used at the bottom of a pilaster arrangement around a door or window
- For exterior applications, the surface must be coated with UV-resistant paint, and joints and screw points should be sealed with exterior-grade filler
- The product is decorative and does not carry the load of a column or any other structural element
- Before installation, remove dust, grease and loose layers from the application surface; it must be clean, dry and sound
- Mark the position of the base after checking that it is aligned with the pilaster shaft
- If required, a 45° mitre cut should be made only when it matches the joint detail specified in the project
- Apply P5050B to the surface with polyurethane (PU) mounting adhesive and use screws for mechanical fastening
- Do not use silicone adhesive
- Cover screw heads and joint lines with filler
- Once dry, smooth the surface with 180-220 grit sandpaper; then apply additional primer if required and apply two coats of paint
- UV-resistant paint is mandatory for exterior applications
- Clean the surface with a soft, dry or slightly damp cloth
- Avoid abrasive creams, solvents, stiff brushes and high-pressure cleaning
- Painted surfaces should be maintained according to the instructions for the paint system used
- For exterior applications, inspect joints, screw points and the painted surface regularly
- If cracks or impact damage appear, the area can be filled, sanded and repainted
Can P5050B be used outdoors?
Yes. P5050B can be used as a decorative base in exterior facade pilaster applications. The application surface must be sound, and the product should be secured with PU mounting adhesive and screws. It must not be left unpainted; it should be coated with a UV-resistant paint suitable for exterior use. Joints and screw heads should be sealed with exterior-grade filler. The product is not a structural column; it is installed as a decorative covering over an existing structural surface.
How is the pilaster column base installed and painted?
Install the base on a clean, dry and sound surface using polyurethane (PU) mounting adhesive and screws. Do not use silicone. Fill the joint lines and screw heads, then smooth them with 180-220 grit sandpaper. The factory primer prepares the surface for painting; additional primer is optional. Finish by applying two coats of water-based or synthetic paint.
What are the product's density and temperature resistance?
A separate density value is not specified for P5050B. The density range for the rigid polyurethane material group used is 150-220 kg/m³. Thanks to its closed-cell structure, the material has water absorption below 1%. According to the technical material data, it can retain its form between -100 °C and +80 °C. The product is decorative and is not intended to carry structural loads.
What advantages does it offer over plaster or wood?
Polyurethane provides a lighter decorative solution than plaster and solid wood. It has a lower risk of breakage than plaster and is more resistant to moisture, decay and insect damage than wood. Its closed-cell structure gives it water absorption below 1%. The surface can also be filled, sanded and painted, allowing minor surface damage to be repaired after installation.
Which pilaster applications is P5050B suitable for?
P5050B is suitable for creating a plinth appearance near the floor or lower section of a pilaster column. It can be used in interior spaces such as entrance halls, living rooms, hotel lobbies, restaurants and offices. It can also be used as the lower component of a pilaster arrangement on villa and detached-house facades. The 55x55 cm base and 94 cm height require the wall and passage area to be measured in advance.