33x66x109 cm Polyurethane Pilaster Column Base
Technical Specifications
| Material | Poliüretan dekorasyon malzemesi |
|---|---|
| Surface | Dekoratif sütun kaidesi formunda boyanabilir yüzey |
| Color | Belirtilmemiş |
| Density | 150-220 kg/m³ |
| Water Absorption | below 1% |
| Dimensional Stability Test | -20 °C / +70 °C |
| Fire Class | B2 (DIN 4102-1) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 33 cm |
| Dimensions | 329 × 657 × 1090 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Pilaster Column Base Plinth)
The P5060B50 Pilaster Column Base is a decorative architectural cladding element that completes the lower section of pilaster installations near floor level. With dimensions of 33 x 66 x 109 cm, it establishes a prominent base section in expansive entrance compositions, around columns, and in façade arrangements. The product is non-structural; it is applied as a decorative cladding over existing concrete, stone, or other load-bearing surfaces.
Manufactured from rigid polyurethane material with a closed-cell structure, the product has a density ranging from 150–220 kg/m³. This construction provides a lighter application compared to plaster, concrete, and solid wood while preserving the decorative form. Water absorption is below 1%. Dimensional stability has been tested across a range of −20 °C to +70 °C; this range should not be interpreted as service temperature or thermal resistance specifications.
The P5060B50's dimensions of 33 cm width, 66 cm depth, and 109 cm height suit projects seeking to establish strong proportions at the lower section of pilaster bodies. It can be used alongside surrounding column or pilaster profiles in large entrance openings, high-ceilinged halls, hotel lobbies, and villa façades. The paintable standard surface allows the color to be determined according to the project palette. The factory primer finish prepares the surface for water-based or synthetic paint application; additional priming may be assessed before installation in accordance with paint manufacturer specifications.
The pilaster column base marks the starting point of a vertical decorative element meeting the interior wall with greater visual order. It may be paired with pilasters framing doorways in entrance halls, placed on either side of a fireplace or decorative niche in living spaces, or applied to window and door axes, façade columns, and villa entrances on exterior façades. For exterior use, the surface must not be left unpainted; it must be protected with UV-resistant exterior paint. Edge details and screw heads are closed with exterior-grade caulk to achieve a unified appearance.
Before installation, the surface is cleaned, dried, and made structurally sound. The product is prepared with 45° miter cuts; polyurethane (PU) mounting adhesive is used at joints, and mechanical fastening with screws is mandatory. Cut and joint areas are sealed with caulk, refined with 180–220 grit sandpaper, then primed and finished with two coats of paint. When securing large components, the product's own weight and connection loads must be considered together. Silicone adhesive must not be used.
By providing a regular base to the pilaster composition, the P5060B50 simultaneously eases handling and installation through its light weight. Compared to plaster, it is less brittle under impact; compared to wood, it is more resistant to moisture and decay; and compared to EPS foam, it offers a harder surface with superior detail definition. Damaged areas can be repaired with caulk, sanding, and paint, making it well-suited for long-term maintenance ease in classical architectural interior and exterior façade projects.
- The P5060B50 Pilaster Column Base is used to define the lower section of pilaster bodies and provide a finished appearance to column compositions
- In entrance halls, it may be positioned beneath pilasters framing doorways, adding classical architectural proportion to the transition area
- It can be applied alongside pilasters framing a fireplace, bookcase, or decorative niche in living rooms
- In bedrooms, it may accent both sides of a bed-wall headboard; in hotel lobbies, it enhances reception-area column arrangements; and in restaurants, it emphasizes wall-bay decorative sections
- On villa façades, it completes entry doors, window surrounds, and sundeck columns; in offices and commercial buildings, it distinguishes reception and greeting areas
- The 33 x 66 x 109 cm dimensions appear more balanced on expansive or tall façades
- For exterior use, UV-resistant paint is essential
- When used alongside a pilaster body, dimensional and profile compatibility must be verified before installation
- The application surface is cleared of oil, dust, and loose layers; it must be entirely clean, dry, and sound
- The Pilaster Column Base is positioned according to the installation axis and, if needed, prepared with 45° miter cuts
- Polyurethane (PU) mounting adhesive is applied to the rear surface
- Mechanical fastening with screws is mandatory in addition to adhesive; the fastening method is selected based on the product's own weight and surface conditions
- Screw heads and joint lines are sealed with caulk
- Once cured, the surface is refined with 180–220 grit sandpaper, then primed and finished with two coats of paint
- Factory primer provides paint preparation; additional primer use is determined by paint manufacturer specifications and customer preference
- Silicone adhesive is not used
- Cleaning should be performed with a soft, lightly damp cloth
- Abrasive cream cleaners, solvent-based products, stiff brushes, and equipment that may scratch the surface should be avoided
- In interior spaces, the painted surface should be periodically inspected for soiling and impact damage
- On exterior façades, UV-resistant paint, edge details, and fastener points should be reviewed regularly
- Should cracks or impact damage occur, the area should be filled with caulk, sanded, and repainted in a manner compatible with the existing paint system
Can P5060B50 be used on exterior façades?
Yes, P5060B50 may be used in exterior façade ornamentation. The product is applied as a decorative cladding to existing façade surfaces and is non-structural. In exterior environments, it must not be left unpainted; it must be protected with UV-resistant exterior paint. Edge details and screw heads must be sealed with exterior-grade caulk, and the painted surface and connection points should be inspected periodically.
How is the pilaster column base mounted and painted?
The product is positioned on a clean, dry, and sound surface and, when necessary, prepared with 45° miter cuts. Polyurethane (PU) mounting adhesive is applied, and mechanical fastening with screws is performed. Joints are caulked and refined with 180–220 grit sandpaper. After factory primer, additional primer may be assessed per paint manufacturer recommendations; two coats of water-based or synthetic paint are then applied. Silicone adhesive must not be used.
What should be known about the product's durability and weight performance?
The closed-cell structure and density of 150–220 kg/m³ make the product lighter than plaster, concrete, and solid wood. Water absorption is below 1%, and dimensional stability has been tested across −20 °C to +70 °C; these values do not represent service temperature. The product's own weight and connection loads must be factored into mounting calculations, and mechanical fastening must not be overlooked.
Why choose pilaster base over plaster or wood?
Compared to plaster, the product offers a lighter alternative for transport and installation and greater resistance to impact breakage. Versus wood, it resists moisture and decay more effectively; versus EPS foam, it provides a harder surface with superior detail definition. Its paintability allows adaptation to interior and exterior color schemes. Damaged areas can be repaired with caulk, sanding, and paint.
In which pilaster and column applications can P5060B50 be used?
P5060B50 is designed to complete the lower section of pilaster bodies. It may be evaluated around entry doors, villa façades, window axes, hotel lobbies, room walls, fireplace surrounds, and restaurant decoration. The 33 x 66 x 109 cm dimensions are especially suitable for creating a distinct base on expansive or tall compositions. When used with a pilaster body, profile and dimensional compatibility must be confirmed before installation.
Similar Products(Pilaster Column Base Plinth)
The P5060B50 Pilaster Column Base is a decorative architectural cladding element that completes the lower section of pilaster installations near floor level. With dimensions of 33 x 66 x 109 cm, it establishes a prominent base section in expansive entrance compositions, around columns, and in façade arrangements. The product is non-structural; it is applied as a decorative cladding over existing concrete, stone, or other load-bearing surfaces.
Manufactured from rigid polyurethane material with a closed-cell structure, the product has a density ranging from 150–220 kg/m³. This construction provides a lighter application compared to plaster, concrete, and solid wood while preserving the decorative form. Water absorption is below 1%. Dimensional stability has been tested across a range of −20 °C to +70 °C; this range should not be interpreted as service temperature or thermal resistance specifications.
The P5060B50's dimensions of 33 cm width, 66 cm depth, and 109 cm height suit projects seeking to establish strong proportions at the lower section of pilaster bodies. It can be used alongside surrounding column or pilaster profiles in large entrance openings, high-ceilinged halls, hotel lobbies, and villa façades. The paintable standard surface allows the color to be determined according to the project palette. The factory primer finish prepares the surface for water-based or synthetic paint application; additional priming may be assessed before installation in accordance with paint manufacturer specifications.
The pilaster column base marks the starting point of a vertical decorative element meeting the interior wall with greater visual order. It may be paired with pilasters framing doorways in entrance halls, placed on either side of a fireplace or decorative niche in living spaces, or applied to window and door axes, façade columns, and villa entrances on exterior façades. For exterior use, the surface must not be left unpainted; it must be protected with UV-resistant exterior paint. Edge details and screw heads are closed with exterior-grade caulk to achieve a unified appearance.
Before installation, the surface is cleaned, dried, and made structurally sound. The product is prepared with 45° miter cuts; polyurethane (PU) mounting adhesive is used at joints, and mechanical fastening with screws is mandatory. Cut and joint areas are sealed with caulk, refined with 180–220 grit sandpaper, then primed and finished with two coats of paint. When securing large components, the product's own weight and connection loads must be considered together. Silicone adhesive must not be used.
By providing a regular base to the pilaster composition, the P5060B50 simultaneously eases handling and installation through its light weight. Compared to plaster, it is less brittle under impact; compared to wood, it is more resistant to moisture and decay; and compared to EPS foam, it offers a harder surface with superior detail definition. Damaged areas can be repaired with caulk, sanding, and paint, making it well-suited for long-term maintenance ease in classical architectural interior and exterior façade projects.
- The P5060B50 Pilaster Column Base is used to define the lower section of pilaster bodies and provide a finished appearance to column compositions
- In entrance halls, it may be positioned beneath pilasters framing doorways, adding classical architectural proportion to the transition area
- It can be applied alongside pilasters framing a fireplace, bookcase, or decorative niche in living rooms
- In bedrooms, it may accent both sides of a bed-wall headboard; in hotel lobbies, it enhances reception-area column arrangements; and in restaurants, it emphasizes wall-bay decorative sections
- On villa façades, it completes entry doors, window surrounds, and sundeck columns; in offices and commercial buildings, it distinguishes reception and greeting areas
- The 33 x 66 x 109 cm dimensions appear more balanced on expansive or tall façades
- For exterior use, UV-resistant paint is essential
- When used alongside a pilaster body, dimensional and profile compatibility must be verified before installation
- The application surface is cleared of oil, dust, and loose layers; it must be entirely clean, dry, and sound
- The Pilaster Column Base is positioned according to the installation axis and, if needed, prepared with 45° miter cuts
- Polyurethane (PU) mounting adhesive is applied to the rear surface
- Mechanical fastening with screws is mandatory in addition to adhesive; the fastening method is selected based on the product's own weight and surface conditions
- Screw heads and joint lines are sealed with caulk
- Once cured, the surface is refined with 180–220 grit sandpaper, then primed and finished with two coats of paint
- Factory primer provides paint preparation; additional primer use is determined by paint manufacturer specifications and customer preference
- Silicone adhesive is not used
- Cleaning should be performed with a soft, lightly damp cloth
- Abrasive cream cleaners, solvent-based products, stiff brushes, and equipment that may scratch the surface should be avoided
- In interior spaces, the painted surface should be periodically inspected for soiling and impact damage
- On exterior façades, UV-resistant paint, edge details, and fastener points should be reviewed regularly
- Should cracks or impact damage occur, the area should be filled with caulk, sanded, and repainted in a manner compatible with the existing paint system
Can P5060B50 be used on exterior façades?
Yes, P5060B50 may be used in exterior façade ornamentation. The product is applied as a decorative cladding to existing façade surfaces and is non-structural. In exterior environments, it must not be left unpainted; it must be protected with UV-resistant exterior paint. Edge details and screw heads must be sealed with exterior-grade caulk, and the painted surface and connection points should be inspected periodically.
How is the pilaster column base mounted and painted?
The product is positioned on a clean, dry, and sound surface and, when necessary, prepared with 45° miter cuts. Polyurethane (PU) mounting adhesive is applied, and mechanical fastening with screws is performed. Joints are caulked and refined with 180–220 grit sandpaper. After factory primer, additional primer may be assessed per paint manufacturer recommendations; two coats of water-based or synthetic paint are then applied. Silicone adhesive must not be used.
What should be known about the product's durability and weight performance?
The closed-cell structure and density of 150–220 kg/m³ make the product lighter than plaster, concrete, and solid wood. Water absorption is below 1%, and dimensional stability has been tested across −20 °C to +70 °C; these values do not represent service temperature. The product's own weight and connection loads must be factored into mounting calculations, and mechanical fastening must not be overlooked.
Why choose pilaster base over plaster or wood?
Compared to plaster, the product offers a lighter alternative for transport and installation and greater resistance to impact breakage. Versus wood, it resists moisture and decay more effectively; versus EPS foam, it provides a harder surface with superior detail definition. Its paintability allows adaptation to interior and exterior color schemes. Damaged areas can be repaired with caulk, sanding, and paint.
In which pilaster and column applications can P5060B50 be used?
P5060B50 is designed to complete the lower section of pilaster bodies. It may be evaluated around entry doors, villa façades, window axes, hotel lobbies, room walls, fireplace surrounds, and restaurant decoration. The 33 x 66 x 109 cm dimensions are especially suitable for creating a distinct base on expansive or tall compositions. When used with a pilaster body, profile and dimensional compatibility must be confirmed before installation.