Polyurethane Decorative Product Pilaster Column Base 8x17x30 cm
Technical Specifications
| Material | Poliüretan dekorasyon ürünü |
|---|---|
| Surface | Dekoratif yüzey; yüzey dokusu hakkında ayrıca teknik bilgi belirtilmemiştir. |
| Color | Bilgi belirtilmemiştir; boyanabilir. |
| Density | 150-220 kg/m³ (production target ~160 kg/m³) |
| Water Absorption | below 1% |
| Service Temperature | -100 °C / +80 °C |
| Fire Class | B2 (flame retardant) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 84 mm |
| Dimensions | 84 × 168 × 298 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Pilaster Column Base Plinth)
The P5015B50 Pilaster Column Base is a decorative base element that completes the lower section of a pilaster near the floor. It is used to create a more cohesive transition between the column shaft and the floor or wall. Its 8 x 17 x 30 cm dimensions are given in the order Width x Length x Height, creating a balanced lower finish, particularly for pilaster designs with narrow fronts.
P5015B50 is manufactured from rigid PU with a closed-cell structure. Its density is 150-220 kg/m³, making it a lighter solution than plaster, concrete and solid wood. Water absorption is below 1%. The product is specified to retain its shape across a temperature range of -100 °C to +80 °C and offers high dimensional stability. However, the base is decorative and must not be used as a structural load-bearing element.
The decorative surface of the base creates a visual finish and emphasizes the bottom of the pilaster column. No colour information is specified for P5015B50; its factory-primed surface can be finished with water-based or synthetic paint according to the project colour scheme. The factory primer prepares the surface for painting. Rather than stating categorically that additional primer is unnecessary, the application and warranty requirements of the selected paint manufacturer should be followed; Polure does not provide a warranty for the paints used.
The P5015B50 Pilaster Column Base can be used to define the lower section of pilaster shafts in entrance halls, living rooms, at the foot of staircases and in high-ceilinged interiors. Outdoors, it can be used on villa façades, around doors, at hotel entrances, on restaurant façades and in commercial building decoration. UV-resistant paint is required for exterior applications. The base does not perform the load-bearing function of a real column; it is applied as part of a decorative covering system over a structural concrete or steel element.
Before installation, the surface must be clean, dry and sound. If necessary, the piece can be prepared with a 45° mitre cut. Polyurethane (PU) mounting adhesive is used for fixing; silicone adhesive is not suitable. Mechanical fixing with screws is mandatory, and the fixing method must be selected according to the product and project conditions. Joints and screw points are filled with filler, sanded with 180-220 grit abrasive paper, and then finished with a suitable primer and two coats of paint.
As a polyurethane decorative product, P5015B50 is a lighter alternative to plaster and offers greater resistance to moisture, rot and insect damage than wood. It provides a harder, more detailed surface than EPS foam. Its difficult-to-ignite structure, which tends to self-extinguish when the flame is removed, and its repairable painted surface help preserve the lower pilaster detail over time. The product's own weight and the loads placed on its fixings must be assessed separately in the installation plan.
- The P5015B50 Pilaster Column Base is used to complete the lower section of a pilaster near the floor
- Measuring 8 x 17 x 30 cm, it is suitable for creating a base transition in narrow or medium-scale pilaster arrangements
- It can be installed beneath decorative pilasters applied along living room walls, while in an entrance hall it visually completes a door surround design down to the floor
- It can also be used as a lower column finish at the foot of a staircase, in high-ceilinged hotel lobbies and in restaurant interiors with classical lines
- On a villa façade, it can be added to pilaster arrangements around windows or doors to complete the exterior composition
- UV-resistant paint is required for exterior use
- The product is not structural and must be installed as a decorative layer over an existing load-bearing column or wall
- If colour contrast is desired between the base and the floor, darker tones can strengthen the base emphasis, while using the same paint colour gives the pilaster a more unified appearance
- For projects using multiple pieces, cut lines and joints should be checked by dry-fitting before installation
- The application area is cleaned to remove dust, grease and loose layers, leaving it clean, dry and sound
- The position of the base is checked together with the pilaster shaft and floor line
- If required, the joint is prepared with a 45° mitre cut
- Polyurethane (PU) mounting adhesive is used for fixing; silicone adhesive must not be used
- Mechanical fixing with screws is mandatory
- Screws and connection points are selected by taking the product's own weight and the loads placed on the fixings into account
- Joints and screw heads are covered with suitable filler
- Once dry, the surface is smoothed with 180-220 grit abrasive paper
- The factory primer prepares the surface for painting; the decision to apply an additional primer should follow the paint manufacturer's instructions
- As a final finish, two coats of water-based or synthetic paint may be applied
- UV-resistant paint must be used outdoors
- The painted surface of P5015B50 should be cleaned with a soft, dry or slightly damp cloth
- Abrasive sponges, solvent-based products and chemicals that may scratch the surface must not be used
- Outdoors, the maintenance interval depends on exposure to sunlight and rainfall, as well as the conditions of the selected paint system
- If fading, cracking or local damage appears, the surface should be cleaned and suitably sanded, then repainted after any necessary filling and priming
- Joints and screw points should also be inspected
Can P5015B50 be used outdoors?
Yes, P5015B50 can be used as a decorative lower base in exterior pilaster applications. Outdoors, the product surface must be protected with UV-resistant paint. Joints and screw points must be sealed with filler suitable for exterior use. The base is not structural; it is installed as part of a decorative pilaster system over an existing concrete, steel or wall surface. The soundness of the surface, the selected fixing method and the loads placed on the fixings should be assessed before installation.
How is P5015B50 installed and painted?
The surface must be clean, dry and sound. If necessary, the piece is cut with a 45° mitre. Polyurethane (PU) mounting adhesive is applied and the piece is mechanically fixed with screws; silicone must not be used. Joints are filled and smoothed with 180-220 grit abrasive paper. The factory primer prepares the surface for painting; any additional primer should be selected according to the paint manufacturer's instructions. Water-based or synthetic paint can be used for the final finish, with two coats recommended.
How durable is P5015B50, and how much does it weigh?
The weight of P5015B50 is not specified in this product record, so providing an exact kilogram value would not be accurate. Rigid PU offers a lightweight decorative solution compared with plaster, concrete and solid wood. Its closed-cell structure gives it a water absorption rate below 1% and high dimensional stability. The service life of the product depends on the installation surface, fixing method, paint system and interior or exterior conditions.
What advantages does it offer over plaster or wood?
P5015B50 is lighter than plaster and easier to work with during installation. Compared with wood, it offers greater resistance to moisture, rot and insect damage. It creates a harder, more detailed surface than EPS foam. Rigid PU can be filled, sanded and painted. However, the product is not structural and should only be used as a decorative element that completes the lower section of a pilaster.
What size pilaster applications is P5015B50 suitable for?
P5015B50 measures 8 x 17 x 30 cm, specified in the order Width x Length x Height. These dimensions create a clearly defined yet controlled base transition at the bottom of a pilaster shaft. When assessing suitability, the pilaster shaft section, wall surface, floor level and surrounding decorative elements should be considered together with the base dimensions. For applications requiring cutting or joints, dry-fitting is recommended before installation.
Similar Products(Pilaster Column Base Plinth)
The P5015B50 Pilaster Column Base is a decorative base element that completes the lower section of a pilaster near the floor. It is used to create a more cohesive transition between the column shaft and the floor or wall. Its 8 x 17 x 30 cm dimensions are given in the order Width x Length x Height, creating a balanced lower finish, particularly for pilaster designs with narrow fronts.
P5015B50 is manufactured from rigid PU with a closed-cell structure. Its density is 150-220 kg/m³, making it a lighter solution than plaster, concrete and solid wood. Water absorption is below 1%. The product is specified to retain its shape across a temperature range of -100 °C to +80 °C and offers high dimensional stability. However, the base is decorative and must not be used as a structural load-bearing element.
The decorative surface of the base creates a visual finish and emphasizes the bottom of the pilaster column. No colour information is specified for P5015B50; its factory-primed surface can be finished with water-based or synthetic paint according to the project colour scheme. The factory primer prepares the surface for painting. Rather than stating categorically that additional primer is unnecessary, the application and warranty requirements of the selected paint manufacturer should be followed; Polure does not provide a warranty for the paints used.
The P5015B50 Pilaster Column Base can be used to define the lower section of pilaster shafts in entrance halls, living rooms, at the foot of staircases and in high-ceilinged interiors. Outdoors, it can be used on villa façades, around doors, at hotel entrances, on restaurant façades and in commercial building decoration. UV-resistant paint is required for exterior applications. The base does not perform the load-bearing function of a real column; it is applied as part of a decorative covering system over a structural concrete or steel element.
Before installation, the surface must be clean, dry and sound. If necessary, the piece can be prepared with a 45° mitre cut. Polyurethane (PU) mounting adhesive is used for fixing; silicone adhesive is not suitable. Mechanical fixing with screws is mandatory, and the fixing method must be selected according to the product and project conditions. Joints and screw points are filled with filler, sanded with 180-220 grit abrasive paper, and then finished with a suitable primer and two coats of paint.
As a polyurethane decorative product, P5015B50 is a lighter alternative to plaster and offers greater resistance to moisture, rot and insect damage than wood. It provides a harder, more detailed surface than EPS foam. Its difficult-to-ignite structure, which tends to self-extinguish when the flame is removed, and its repairable painted surface help preserve the lower pilaster detail over time. The product's own weight and the loads placed on its fixings must be assessed separately in the installation plan.
- The P5015B50 Pilaster Column Base is used to complete the lower section of a pilaster near the floor
- Measuring 8 x 17 x 30 cm, it is suitable for creating a base transition in narrow or medium-scale pilaster arrangements
- It can be installed beneath decorative pilasters applied along living room walls, while in an entrance hall it visually completes a door surround design down to the floor
- It can also be used as a lower column finish at the foot of a staircase, in high-ceilinged hotel lobbies and in restaurant interiors with classical lines
- On a villa façade, it can be added to pilaster arrangements around windows or doors to complete the exterior composition
- UV-resistant paint is required for exterior use
- The product is not structural and must be installed as a decorative layer over an existing load-bearing column or wall
- If colour contrast is desired between the base and the floor, darker tones can strengthen the base emphasis, while using the same paint colour gives the pilaster a more unified appearance
- For projects using multiple pieces, cut lines and joints should be checked by dry-fitting before installation
- The application area is cleaned to remove dust, grease and loose layers, leaving it clean, dry and sound
- The position of the base is checked together with the pilaster shaft and floor line
- If required, the joint is prepared with a 45° mitre cut
- Polyurethane (PU) mounting adhesive is used for fixing; silicone adhesive must not be used
- Mechanical fixing with screws is mandatory
- Screws and connection points are selected by taking the product's own weight and the loads placed on the fixings into account
- Joints and screw heads are covered with suitable filler
- Once dry, the surface is smoothed with 180-220 grit abrasive paper
- The factory primer prepares the surface for painting; the decision to apply an additional primer should follow the paint manufacturer's instructions
- As a final finish, two coats of water-based or synthetic paint may be applied
- UV-resistant paint must be used outdoors
- The painted surface of P5015B50 should be cleaned with a soft, dry or slightly damp cloth
- Abrasive sponges, solvent-based products and chemicals that may scratch the surface must not be used
- Outdoors, the maintenance interval depends on exposure to sunlight and rainfall, as well as the conditions of the selected paint system
- If fading, cracking or local damage appears, the surface should be cleaned and suitably sanded, then repainted after any necessary filling and priming
- Joints and screw points should also be inspected
Can P5015B50 be used outdoors?
Yes, P5015B50 can be used as a decorative lower base in exterior pilaster applications. Outdoors, the product surface must be protected with UV-resistant paint. Joints and screw points must be sealed with filler suitable for exterior use. The base is not structural; it is installed as part of a decorative pilaster system over an existing concrete, steel or wall surface. The soundness of the surface, the selected fixing method and the loads placed on the fixings should be assessed before installation.
How is P5015B50 installed and painted?
The surface must be clean, dry and sound. If necessary, the piece is cut with a 45° mitre. Polyurethane (PU) mounting adhesive is applied and the piece is mechanically fixed with screws; silicone must not be used. Joints are filled and smoothed with 180-220 grit abrasive paper. The factory primer prepares the surface for painting; any additional primer should be selected according to the paint manufacturer's instructions. Water-based or synthetic paint can be used for the final finish, with two coats recommended.
How durable is P5015B50, and how much does it weigh?
The weight of P5015B50 is not specified in this product record, so providing an exact kilogram value would not be accurate. Rigid PU offers a lightweight decorative solution compared with plaster, concrete and solid wood. Its closed-cell structure gives it a water absorption rate below 1% and high dimensional stability. The service life of the product depends on the installation surface, fixing method, paint system and interior or exterior conditions.
What advantages does it offer over plaster or wood?
P5015B50 is lighter than plaster and easier to work with during installation. Compared with wood, it offers greater resistance to moisture, rot and insect damage. It creates a harder, more detailed surface than EPS foam. Rigid PU can be filled, sanded and painted. However, the product is not structural and should only be used as a decorative element that completes the lower section of a pilaster.
What size pilaster applications is P5015B50 suitable for?
P5015B50 measures 8 x 17 x 30 cm, specified in the order Width x Length x Height. These dimensions create a clearly defined yet controlled base transition at the bottom of a pilaster shaft. When assessing suitability, the pilaster shaft section, wall surface, floor level and surrounding decorative elements should be considered together with the base dimensions. For applications requiring cutting or joints, dry-fitting is recommended before installation.