Polyurethane Pilaster Column Base 22 x 22 x 36 cm
Technical Specifications
| Material | Polyurethane |
|---|---|
| Surface | Dekoratif, boyanabilir yüzey |
| Color | Belirtilmemiş |
| Density | 150-220 kg/m³ (production target ~160 kg/m³) |
| Water Absorption | below 1% |
| Service Temperature | -100 °C / +80 °C |
| Fire Class | B2 (flame retardant) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 22 cm |
| Dimensions | 224 × 224 × 362 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Pilaster Column Base Plinth)
The P5020B Pilaster Column Base is a polyurethane architectural decoration element that completes the transition near the floor beneath pilasters and decorative columns, giving the architectural composition a defined base. Its 22 x 22 x 36 cm dimensions create a visually balanced lower section for square-section pilaster shafts. The product is not structural; it is used as a decorative finish and complementary architectural element.
The Pilaster Column Base features a closed-cell rigid PU structure with a density of 150-220 kg/m³. This makes it lighter than comparable plaster, solid wood or concrete products while helping preserve its decorative form. The material has a temperature resistance of -100 °C / +80 °C. Water absorption is below 1%; however, the surface must still be considered together with the application and paint system. The product is difficult to ignite and tends to self-extinguish once the flame source is removed.
The 22 cm width and 22 cm length give the base a square, balanced silhouette at floor level, while its 36 cm height creates a more defined lower section than a short transition piece without overpowering the pilaster shaft. The decorative surface can be painted. The factory primer prepares it for water-based or synthetic paint. A restrained color choice preserves a classical architectural line, while a paint finish coordinated with the facade or interior palette integrates the base into the overall composition.
The Pilaster Column Base can be used at the foot of wall pilasters in entrance halls, around fireplaces or niches in living rooms, beneath column coverings in hotel lobbies, and in restaurant interiors. On exterior facades, it defines the point where a decorative pilaster arrangement meets the ground at villa, mansion or commercial building entrances. For exterior use, it should not be left unpainted and must be protected with UV-resistant paint. Filling the joints and screw heads with exterior-grade filler creates a more integrated appearance.
For installation, the surface must be clean, dry, sound and free of dust. If required, the piece can be cut with a 45° mitre. Use polyurethane (PU) mounting adhesive instead of silicone. Mechanical fixing with screws is mandatory, taking the product's own weight and connection loads into account; for wide or special applications, the support method must be determined according to the project conditions. Fill the joints, smooth them with 180-220 grit sandpaper, then apply primer and two coats of paint. Compared with plaster, the material is more resistant to breakage; compared with wood, it offers greater resistance to moisture and rot; and compared with EPS foam, it provides a harder, more detailed decorative surface.
The P5020B Pilaster Column Base is a precisely sized decorative component for architects, interior designers and installers who want to complete the proportions of the lower section in classical facade and interior designs. Its factory-primed surface can be adapted to the project through the selected color and paint system. Additional primer is optional; however, paint manufacturers may not provide a warranty for surfaces painted without their own primer. Polure does not warrant the paints used and accepts no responsibility in this regard.
- The P5020B Pilaster Column Base creates a decorative transition where a pilaster shaft meets the floor
- In entrance halls, it defines the base of pilasters applied along a wall and creates a more orderly relationship with the door surround
- It can be used at the bottom of pilaster arrangements around a fireplace, niche or TV wall in a living room
- In a bedroom, it can complete the lower section of vertical decorative elements placed on either side of a headboard wall
- In hotel lobbies, restaurants and office entrances, it gives the floor-level section of column coverings an architectural finish
- On villa and mansion facades, it can be installed beneath pilaster compositions around doors or windows
- For exterior use, the product must be coated with UV-resistant paint, and joints and screw points should be finished with exterior-grade filler
- The 22 x 22 cm base dimensions provide a balanced appearance on medium-scale interior walls and around entrances
- The base should be positioned as part of a decorative covering arrangement rather than as a structural column
- Before installation, make the surface clean, dry, sound and free of dust
- Position the Pilaster Column Base where it will meet the shaft, then check the measurements and vertical alignment
- Apply a 45° mitre cut if necessary
- Use only polyurethane (PU) mounting adhesive for installation; silicone should not be used
- Mechanical fixing with screws is mandatory, taking the product's own weight and connection loads into account
- The need for plugs or additional support must be determined according to the surface and project conditions
- Fill the joints and screw points with filler
- Once dry, sand with 180-220 grit sandpaper, then apply primer and two coats of paint
- The factory primer prepares the surface for painting; additional primer is optional and depends on the customer's preference and the selected paint system
- The surface of the Pilaster Column Base can be cleaned with a soft, slightly damp cloth
- Do not use a stiff brush, abrasive sponge, solvent or cleaning products containing strong chemicals to remove dust
- On exterior facades, inspect the painted surface regularly
- If cracks, blistering or opening joints are observed, repair the affected area
- The timing of repainting should be assessed according to the paint system used and exposure to sunlight and rain
- Unpainted PU exposed to outdoor conditions may yellow over time under UV exposure
Can the Pilaster Column Base be used outdoors?
Yes, P5020B can be used at the lower section of a decorative pilaster arrangement on an exterior facade. After installation, the surface must be coated with UV-resistant paint; unpainted PU may yellow over time under sunlight. Joints and screw heads should be finished with exterior-grade filler. The product does not serve as a structural column; it is installed as a decorative covering over an existing structural element. Surface integrity, the fixing method and any required mechanical support must be determined according to the project conditions.
How is P5020B installed, and which paint can be used?
After cleaning and drying the surface, position the piece and cut it with a 45° mitre if necessary. Use polyurethane (PU) mounting adhesive, not silicone. Mechanical fixing with screws is mandatory. Fill the joints, smooth them with 180-220 grit sandpaper and apply two coats of paint. The factory primer prepares the surface for water-based or synthetic paint. Additional primer is optional, but the paint manufacturer's application instructions must also be followed.
What are the product's dimensions and material properties?
P5020B measures 22 x 22 x 36 cm in width, length and height, respectively. It has a closed-cell rigid PU structure with a density of 150-220 kg/m³. Its temperature resistance is -100 °C / +80 °C, and water absorption is below 1%. This technical structure helps preserve the decorative form under various interior and exterior conditions. Because the product has its own weight and connection loads, installation should not rely on adhesive alone; it must also be supported with screws.
Why choose this base instead of plaster or wood?
Compared with plaster, P5020B is a lighter decorative component that is less prone to breaking under impact. Compared with wood, it offers greater resistance to moisture, rot and insect damage. It is harder than EPS foam and helps the base retain a clearly defined form. Its closed-cell structure and water absorption below 1% provide an advantage in humid conditions. However, the product does not carry structural loads; it is intended to complete the lower section of pilaster and decorative column arrangements.
Can the Pilaster Column Base be painted?
Yes, P5020B has a paintable decorative surface and a factory primer. Before painting, fill the joints, prepare the surface with 180-220 grit sandpaper and follow the paint system manufacturer's recommendations. Water-based or synthetic paint can be used. Additional primer is not specified as mandatory; however, paint manufacturers may not warrant surfaces painted without their own primer. Polure does not warrant the paints used and accepts no responsibility in this regard.
Similar Products(Pilaster Column Base Plinth)
The P5020B Pilaster Column Base is a polyurethane architectural decoration element that completes the transition near the floor beneath pilasters and decorative columns, giving the architectural composition a defined base. Its 22 x 22 x 36 cm dimensions create a visually balanced lower section for square-section pilaster shafts. The product is not structural; it is used as a decorative finish and complementary architectural element.
The Pilaster Column Base features a closed-cell rigid PU structure with a density of 150-220 kg/m³. This makes it lighter than comparable plaster, solid wood or concrete products while helping preserve its decorative form. The material has a temperature resistance of -100 °C / +80 °C. Water absorption is below 1%; however, the surface must still be considered together with the application and paint system. The product is difficult to ignite and tends to self-extinguish once the flame source is removed.
The 22 cm width and 22 cm length give the base a square, balanced silhouette at floor level, while its 36 cm height creates a more defined lower section than a short transition piece without overpowering the pilaster shaft. The decorative surface can be painted. The factory primer prepares it for water-based or synthetic paint. A restrained color choice preserves a classical architectural line, while a paint finish coordinated with the facade or interior palette integrates the base into the overall composition.
The Pilaster Column Base can be used at the foot of wall pilasters in entrance halls, around fireplaces or niches in living rooms, beneath column coverings in hotel lobbies, and in restaurant interiors. On exterior facades, it defines the point where a decorative pilaster arrangement meets the ground at villa, mansion or commercial building entrances. For exterior use, it should not be left unpainted and must be protected with UV-resistant paint. Filling the joints and screw heads with exterior-grade filler creates a more integrated appearance.
For installation, the surface must be clean, dry, sound and free of dust. If required, the piece can be cut with a 45° mitre. Use polyurethane (PU) mounting adhesive instead of silicone. Mechanical fixing with screws is mandatory, taking the product's own weight and connection loads into account; for wide or special applications, the support method must be determined according to the project conditions. Fill the joints, smooth them with 180-220 grit sandpaper, then apply primer and two coats of paint. Compared with plaster, the material is more resistant to breakage; compared with wood, it offers greater resistance to moisture and rot; and compared with EPS foam, it provides a harder, more detailed decorative surface.
The P5020B Pilaster Column Base is a precisely sized decorative component for architects, interior designers and installers who want to complete the proportions of the lower section in classical facade and interior designs. Its factory-primed surface can be adapted to the project through the selected color and paint system. Additional primer is optional; however, paint manufacturers may not provide a warranty for surfaces painted without their own primer. Polure does not warrant the paints used and accepts no responsibility in this regard.
- The P5020B Pilaster Column Base creates a decorative transition where a pilaster shaft meets the floor
- In entrance halls, it defines the base of pilasters applied along a wall and creates a more orderly relationship with the door surround
- It can be used at the bottom of pilaster arrangements around a fireplace, niche or TV wall in a living room
- In a bedroom, it can complete the lower section of vertical decorative elements placed on either side of a headboard wall
- In hotel lobbies, restaurants and office entrances, it gives the floor-level section of column coverings an architectural finish
- On villa and mansion facades, it can be installed beneath pilaster compositions around doors or windows
- For exterior use, the product must be coated with UV-resistant paint, and joints and screw points should be finished with exterior-grade filler
- The 22 x 22 cm base dimensions provide a balanced appearance on medium-scale interior walls and around entrances
- The base should be positioned as part of a decorative covering arrangement rather than as a structural column
- Before installation, make the surface clean, dry, sound and free of dust
- Position the Pilaster Column Base where it will meet the shaft, then check the measurements and vertical alignment
- Apply a 45° mitre cut if necessary
- Use only polyurethane (PU) mounting adhesive for installation; silicone should not be used
- Mechanical fixing with screws is mandatory, taking the product's own weight and connection loads into account
- The need for plugs or additional support must be determined according to the surface and project conditions
- Fill the joints and screw points with filler
- Once dry, sand with 180-220 grit sandpaper, then apply primer and two coats of paint
- The factory primer prepares the surface for painting; additional primer is optional and depends on the customer's preference and the selected paint system
- The surface of the Pilaster Column Base can be cleaned with a soft, slightly damp cloth
- Do not use a stiff brush, abrasive sponge, solvent or cleaning products containing strong chemicals to remove dust
- On exterior facades, inspect the painted surface regularly
- If cracks, blistering or opening joints are observed, repair the affected area
- The timing of repainting should be assessed according to the paint system used and exposure to sunlight and rain
- Unpainted PU exposed to outdoor conditions may yellow over time under UV exposure
Can the Pilaster Column Base be used outdoors?
Yes, P5020B can be used at the lower section of a decorative pilaster arrangement on an exterior facade. After installation, the surface must be coated with UV-resistant paint; unpainted PU may yellow over time under sunlight. Joints and screw heads should be finished with exterior-grade filler. The product does not serve as a structural column; it is installed as a decorative covering over an existing structural element. Surface integrity, the fixing method and any required mechanical support must be determined according to the project conditions.
How is P5020B installed, and which paint can be used?
After cleaning and drying the surface, position the piece and cut it with a 45° mitre if necessary. Use polyurethane (PU) mounting adhesive, not silicone. Mechanical fixing with screws is mandatory. Fill the joints, smooth them with 180-220 grit sandpaper and apply two coats of paint. The factory primer prepares the surface for water-based or synthetic paint. Additional primer is optional, but the paint manufacturer's application instructions must also be followed.
What are the product's dimensions and material properties?
P5020B measures 22 x 22 x 36 cm in width, length and height, respectively. It has a closed-cell rigid PU structure with a density of 150-220 kg/m³. Its temperature resistance is -100 °C / +80 °C, and water absorption is below 1%. This technical structure helps preserve the decorative form under various interior and exterior conditions. Because the product has its own weight and connection loads, installation should not rely on adhesive alone; it must also be supported with screws.
Why choose this base instead of plaster or wood?
Compared with plaster, P5020B is a lighter decorative component that is less prone to breaking under impact. Compared with wood, it offers greater resistance to moisture, rot and insect damage. It is harder than EPS foam and helps the base retain a clearly defined form. Its closed-cell structure and water absorption below 1% provide an advantage in humid conditions. However, the product does not carry structural loads; it is intended to complete the lower section of pilaster and decorative column arrangements.
Can the Pilaster Column Base be painted?
Yes, P5020B has a paintable decorative surface and a factory primer. Before painting, fill the joints, prepare the surface with 180-220 grit sandpaper and follow the paint system manufacturer's recommendations. Water-based or synthetic paint can be used. Additional primer is not specified as mandatory; however, paint manufacturers may not warrant surfaces painted without their own primer. Polure does not warrant the paints used and accepts no responsibility in this regard.