


17x17x30 cm Polyurethane Pilaster Column Base
Technical Specifications
| Material | Poliüretan dekorasyon ürünü |
|---|---|
| Surface | Dekoratif, boyanabilir yüzey |
| Color | Boya uygulamasına uygun ham yüzey; nihai renk seçilen boya sistemine bağlıdır. |
| Density | Belirtilmemiştir. |
| Water Absorption | below 1% |
| Service Temperature | -100 °C / +80 °C |
| Fire Class | B2 (flame retardant) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 17 cm |
| Dimensions | 168 × 168 × 298 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Pilaster Column Base Plinth)
























The P5015B Pilaster Column Base is a polyurethane architectural decoration element that completes the lower section of pilasters near the floor. Measuring 17x17x30 cm, it creates a defined yet balanced transition at the base of the pilaster shaft. Its square-footprint form can be used in entrance halls, living rooms and facade compositions to give the lower section of a pilaster arrangement a clearly grounded appearance. The product is decorative and must not be considered a structural column or load-bearing element.
Rigid polyurethane and its closed-cell structure provide sufficient surface hardness while keeping the product lightweight. Its density is 150-220 kg/m³, and its water absorption rate is below 1%. The P5015B can be used while maintaining its form across a temperature range of -100 °C to +80 °C. Compared with plaster- and wood-based alternatives, it offers better resistance to moisture, decay and mould. Its fire response is B2: it is difficult to ignite and self-extinguishes when the flame source is removed. No additional fire-resistance period or project suitability should be assumed without separate product documentation.
The 17 cm width and 17 cm depth create a proportional square base beneath the pilaster shaft, while the 30 cm height makes the lower section visible both on facades and indoors. The paintable decorative surface adapts to classical architectural compositions, simple entrance designs and different colour schemes. The product is supplied with a factory primer and can be finished with water-based or synthetic paint systems. The factory primer prepares the surface for painting; however, paint manufacturers may not provide a warranty for surfaces painted without using their own primer. Additional priming is optional. Polure does not provide a warranty for the paint system used.
The P5015B can be used at the base of pilasters, at villa entrances, in hotel lobbies, restaurant reception areas and office walls with a classical design language. Indoors, it can complete living-room walls, corridors and areas around staircases. On facades, it creates a decorative base appearance that strengthens the visual connection between pilasters around windows and doors and the ground plane. For exterior use, it must not be left unpainted; a UV-resistant paint should be selected. The product itself is not structural and is installed as a decorative covering over an existing structural surface or column.
Before installation, the surface must be clean, dry, sound and even. Where required, the product can be prepared with 45° mitre cuts so that joints align accurately. Polyurethane (PU) mounting adhesive is used for fixing, and mechanical fastening with screws is mandatory. Joints are filled with filler and smoothed with 180-220 grit sandpaper before primer and two coats of paint are applied. Silicone adhesive must not be used. Compared with plaster, polyurethane is lightweight and more resistant to breakage; compared with wood, it offers greater resistance to moisture and decay, helping make the installation of detailed decorative profiles more practical.
- The P5015B Pilaster Column Base is used at the lower section where a pilaster shaft meets the floor
- Its 17x17 cm square footprint and 30 cm height create a clearly defined starting point for decorative columns positioned on either side of entrance doors
- It is suitable for separating pilaster shafts from the floor at villa entrances, completing wall-height column compositions in hotel lobbies and strengthening the classical architectural effect in restaurant reception areas
- It can be installed on interior walls in living rooms, corridors and around staircases
- On facades, it can be used at the base of pilasters surrounding windows or doors; UV-resistant paint is mandatory for exterior applications
- The base is fixed over an existing structural surface as a decorative element and does not carry structural loads
- Painting it in the same colour as the wall creates an integrated appearance, while a contrasting colour highlights the lower section
- Remove dust, grease and loose particles from the application area; the surface must be clean, dry, sound and even
- Check the dimensional and axial alignment of the pilaster shaft and base before installation
- Where necessary, make 45° mitre cuts at the joints
- Bond the P5015B to the surface with polyurethane (PU) mounting adhesive; mechanical fastening with screws is mandatory
- Cover screw heads and joints with a suitable filler
- Once the filler has dried, sand with 180-220 grit sandpaper
- Inspect the factory-primed surface; the use of additional primer depends on the paint system and installation preference
- Apply two coats of water-based or synthetic paint as the final finish
- Do not use silicone adhesive
- On exterior facades, cover joints and screw points with exterior-grade filler and select a UV-resistant paint
- The P5015B Pilaster Column Base can be cleaned by gently removing accumulated dust with a soft, damp cloth
- Do not use stiff brushes, abrasive sponges, solvent-based products or strong chemical cleaners, as they may damage the decorative paint layer
- Inspect areas exposed to impact and repair the surface with filler and sanding where necessary
- The need for repainting depends on the paint system used, exposure to sunlight and moisture, and outdoor conditions
- On exterior facades, inspect joints and screw points regularly
Can the P5015B be used on exterior facades?
Yes. The P5015B can be used outdoors as a decorative finishing element at the base of pilaster columns. It is fixed over an existing structural surface or column as a decorative covering and does not carry structural loads. For exterior applications, the surface must be prepared correctly, the product must be mechanically fastened with screws in addition to PU mounting adhesive, and the joints must be sealed with exterior-grade filler. Unpainted polyurethane may yellow under sunlight, so UV-resistant paint is mandatory. The selected paint system should also be checked for suitability in outdoor conditions.
How is a pilaster column base installed and painted?
Prepare the installation surface so that it is clean, dry, sound and even. Check the alignment of the base and pilaster shaft, and make 45° mitre cuts where necessary. Use polyurethane (PU) mounting adhesive for bonding; mechanical fastening with screws is mandatory. Do not use silicone adhesive. Fill the joints and screw points, then smooth them with 180-220 grit sandpaper. The factory primer prepares the surface for painting, while additional primer is optional. Apply two coats of water-based or synthetic paint as the final finish.
Is the P5015B heavy, and how durable is it?
Rigid polyurethane products have a density of 150-220 kg/m³, making them lightweight decorative elements compared with plaster, concrete, stone and solid wood solutions. The actual weight of the P5015B depends on its production cross-section and part structure, so an exact kilogram value cannot be stated without product-specific information. Its closed-cell structure keeps water absorption below 1%. The material can maintain its form from -100 °C to +80 °C. Service life depends on installation, the paint system, impact and environmental conditions.
Why choose a polyurethane base instead of plaster or wood?
A polyurethane base is a lighter and more break-resistant option than plaster. Compared with wood, it performs better against moisture, decay and insect damage. Its closed-cell structure keeps water absorption below 1%. The paintable surface allows the base to coordinate with the pilaster shaft or wall. However, the P5015B is a decorative element; it does not replace the structural function of concrete, steel or an existing column and must not be used for that purpose.
What scale of pilaster applications is the P5015B suitable for?
With a 17x17 cm footprint and a height of 30 cm, the P5015B creates a clearly visible, medium-scale base effect at the bottom of pilaster columns. These dimensions can be used in decorative pilaster compositions around entrance doors, on living-room walls, in corridors, hotel lobbies and villa facades. Before installation, check that the pilaster shaft is compatible with the base dimensions. The base must be positioned on the same axis and secured to the surface with suitable mechanical fastening.
Similar Products(Pilaster Column Base Plinth)
























The P5015B Pilaster Column Base is a polyurethane architectural decoration element that completes the lower section of pilasters near the floor. Measuring 17x17x30 cm, it creates a defined yet balanced transition at the base of the pilaster shaft. Its square-footprint form can be used in entrance halls, living rooms and facade compositions to give the lower section of a pilaster arrangement a clearly grounded appearance. The product is decorative and must not be considered a structural column or load-bearing element.
Rigid polyurethane and its closed-cell structure provide sufficient surface hardness while keeping the product lightweight. Its density is 150-220 kg/m³, and its water absorption rate is below 1%. The P5015B can be used while maintaining its form across a temperature range of -100 °C to +80 °C. Compared with plaster- and wood-based alternatives, it offers better resistance to moisture, decay and mould. Its fire response is B2: it is difficult to ignite and self-extinguishes when the flame source is removed. No additional fire-resistance period or project suitability should be assumed without separate product documentation.
The 17 cm width and 17 cm depth create a proportional square base beneath the pilaster shaft, while the 30 cm height makes the lower section visible both on facades and indoors. The paintable decorative surface adapts to classical architectural compositions, simple entrance designs and different colour schemes. The product is supplied with a factory primer and can be finished with water-based or synthetic paint systems. The factory primer prepares the surface for painting; however, paint manufacturers may not provide a warranty for surfaces painted without using their own primer. Additional priming is optional. Polure does not provide a warranty for the paint system used.
The P5015B can be used at the base of pilasters, at villa entrances, in hotel lobbies, restaurant reception areas and office walls with a classical design language. Indoors, it can complete living-room walls, corridors and areas around staircases. On facades, it creates a decorative base appearance that strengthens the visual connection between pilasters around windows and doors and the ground plane. For exterior use, it must not be left unpainted; a UV-resistant paint should be selected. The product itself is not structural and is installed as a decorative covering over an existing structural surface or column.
Before installation, the surface must be clean, dry, sound and even. Where required, the product can be prepared with 45° mitre cuts so that joints align accurately. Polyurethane (PU) mounting adhesive is used for fixing, and mechanical fastening with screws is mandatory. Joints are filled with filler and smoothed with 180-220 grit sandpaper before primer and two coats of paint are applied. Silicone adhesive must not be used. Compared with plaster, polyurethane is lightweight and more resistant to breakage; compared with wood, it offers greater resistance to moisture and decay, helping make the installation of detailed decorative profiles more practical.
- The P5015B Pilaster Column Base is used at the lower section where a pilaster shaft meets the floor
- Its 17x17 cm square footprint and 30 cm height create a clearly defined starting point for decorative columns positioned on either side of entrance doors
- It is suitable for separating pilaster shafts from the floor at villa entrances, completing wall-height column compositions in hotel lobbies and strengthening the classical architectural effect in restaurant reception areas
- It can be installed on interior walls in living rooms, corridors and around staircases
- On facades, it can be used at the base of pilasters surrounding windows or doors; UV-resistant paint is mandatory for exterior applications
- The base is fixed over an existing structural surface as a decorative element and does not carry structural loads
- Painting it in the same colour as the wall creates an integrated appearance, while a contrasting colour highlights the lower section
- Remove dust, grease and loose particles from the application area; the surface must be clean, dry, sound and even
- Check the dimensional and axial alignment of the pilaster shaft and base before installation
- Where necessary, make 45° mitre cuts at the joints
- Bond the P5015B to the surface with polyurethane (PU) mounting adhesive; mechanical fastening with screws is mandatory
- Cover screw heads and joints with a suitable filler
- Once the filler has dried, sand with 180-220 grit sandpaper
- Inspect the factory-primed surface; the use of additional primer depends on the paint system and installation preference
- Apply two coats of water-based or synthetic paint as the final finish
- Do not use silicone adhesive
- On exterior facades, cover joints and screw points with exterior-grade filler and select a UV-resistant paint
- The P5015B Pilaster Column Base can be cleaned by gently removing accumulated dust with a soft, damp cloth
- Do not use stiff brushes, abrasive sponges, solvent-based products or strong chemical cleaners, as they may damage the decorative paint layer
- Inspect areas exposed to impact and repair the surface with filler and sanding where necessary
- The need for repainting depends on the paint system used, exposure to sunlight and moisture, and outdoor conditions
- On exterior facades, inspect joints and screw points regularly
Can the P5015B be used on exterior facades?
Yes. The P5015B can be used outdoors as a decorative finishing element at the base of pilaster columns. It is fixed over an existing structural surface or column as a decorative covering and does not carry structural loads. For exterior applications, the surface must be prepared correctly, the product must be mechanically fastened with screws in addition to PU mounting adhesive, and the joints must be sealed with exterior-grade filler. Unpainted polyurethane may yellow under sunlight, so UV-resistant paint is mandatory. The selected paint system should also be checked for suitability in outdoor conditions.
How is a pilaster column base installed and painted?
Prepare the installation surface so that it is clean, dry, sound and even. Check the alignment of the base and pilaster shaft, and make 45° mitre cuts where necessary. Use polyurethane (PU) mounting adhesive for bonding; mechanical fastening with screws is mandatory. Do not use silicone adhesive. Fill the joints and screw points, then smooth them with 180-220 grit sandpaper. The factory primer prepares the surface for painting, while additional primer is optional. Apply two coats of water-based or synthetic paint as the final finish.
Is the P5015B heavy, and how durable is it?
Rigid polyurethane products have a density of 150-220 kg/m³, making them lightweight decorative elements compared with plaster, concrete, stone and solid wood solutions. The actual weight of the P5015B depends on its production cross-section and part structure, so an exact kilogram value cannot be stated without product-specific information. Its closed-cell structure keeps water absorption below 1%. The material can maintain its form from -100 °C to +80 °C. Service life depends on installation, the paint system, impact and environmental conditions.
Why choose a polyurethane base instead of plaster or wood?
A polyurethane base is a lighter and more break-resistant option than plaster. Compared with wood, it performs better against moisture, decay and insect damage. Its closed-cell structure keeps water absorption below 1%. The paintable surface allows the base to coordinate with the pilaster shaft or wall. However, the P5015B is a decorative element; it does not replace the structural function of concrete, steel or an existing column and must not be used for that purpose.
What scale of pilaster applications is the P5015B suitable for?
With a 17x17 cm footprint and a height of 30 cm, the P5015B creates a clearly visible, medium-scale base effect at the bottom of pilaster columns. These dimensions can be used in decorative pilaster compositions around entrance doors, on living-room walls, in corridors, hotel lobbies and villa facades. Before installation, check that the pilaster shaft is compatible with the base dimensions. The base must be positioned on the same axis and secured to the surface with suitable mechanical fastening.