The Polure P2001C border moulding is a decorative architectural element featuring classic embossed details, designed to create aesthetic transitions between walls and ceilings. Adding depth and a layered look to any space, this model breaks up the monotony of flat surfaces and enhances architectural character. It is an ideal choice for horizontally dividing walls or creating ceiling frames, especially in living rooms, hallways, hotel lobbies, and restaurant projects.
With a height of 123 mm, a thickness of 34 mm, and a length of 2180 mm, this border is manufactured from high-density rigid polyurethane (150-220 kg/m³). It offers a surface hardness comparable to wood while remaining lightweight for easy installation. Thanks to its closed-cell structure, it has a water absorption rate of less than 1%, allowing it to be used without deformation in humid interiors, bathrooms, and even suitable exterior applications. Its dimensional stability has been tested between -20 °C and +70 °C, preventing expansion or cracking.
The most striking feature of the P2001C model is its classic relief carvings, showcasing symmetrical leaves and elegant curves at its center. Crafted with advanced molding technology to ensure smooth and sharp lines, these motifs create a play of light and shadow on the surface, offering a rich visual texture. As seen in the cross-section profile on the left end, the stepped transitions and precise contours ensure a seamless joint when combined with modern installation techniques. Unlike plaster, it does not crumble, and unlike wood, it is free of knots and cracks, providing a flawless finish.
This versatile decorative element can be used indoors not only as a wall moulding or border but also as an over-door pediment, a ceiling cornice complement, or a top finishing profile for classic wainscoting. On exteriors, it can serve as a decorative window header or a horizontal band between floors. For outdoor applications, coating the material with a UV-resistant exterior paint is mandatory to protect it from sunlight degradation.
Delivered with a factory-applied primer, the product's surface is prepped to maximize topcoat adhesion. However, since paint manufacturers have their own priming standards, applying an additional primer is entirely optional. During installation, Polure Polfix adhesive should be applied to a clean, dry surface, followed by mechanical fastening with screws. Once the joints and screw holes are filled and sanded smooth with 180-220 grit sandpaper, the process is completed with two coats of water-based or synthetic paint.
