21x42x19 cm Pilaster Column – Poliüretan Decorative Product
Technical Specifications
| Material | Polyurethane decorative product |
|---|---|
| Surface | Decorative molded surface |
| Color | Paintable unfinished surface |
| Density | 150-220 kg/m³ |
| Water Absorption | below 1% |
| Dimensional Stability Test | -20 °C / +70 °C |
| Fire Class | B2 (DIN 4102-1) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 21 cm |
| Dimensions | 212 × 424 × 190 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Pilaster Capitals)
A pilaster column is a decorative architectural element that creates the visual effect of a column on a wall and adds vertical emphasis to classical architectural compositions. The P5030D50 Pilaster Column is a paintable rigid polyurethane decorative product suitable for interior and exterior applications. It is installed as wall cladding and is not intended to carry structural loads.
The product measures 21 x 42 x 19 cm in width, length and height, respectively. The 21 cm width provides a balanced side dimension where the pilaster body meets the surface, while the 42 cm length and 19 cm height make it suitable for use as a capital or transition section within a column composition. Its closed-cell rigid polyurethane structure has a density of 150-220 kg/m³. This makes it lighter than plaster and solid wood while helping preserve decorative details.
With its decorative moulded surface, the P5030D50 Pilaster Column complements classical column arrangements. Before installation, check the dimensional and profile compatibility of the column shaft, base or other capital components used on the same facade. Polyurethane is more resistant to moisture and decay than wood, while offering a harder, more detailed surface than EPS foam that can be filled, sanded and painted.
Because of its closed-cell structure, water absorption is below 1% and dimensional stability is high. The product has been tested to retain its form between -20 °C and +70 °C. In terms of reaction to fire, it has fire class B2 (DIN 4102-1). however, no fire-resistance period or project-specific compliance should be assumed. Unpainted polyurethane may yellow over time, so the use of UV-resistant paint is mandatory for exterior applications.
The Pilaster Column can be used to divide wall surfaces in entrance halls, living rooms, stairway walls, hotel lobbies, restaurants and office reception areas. It can also be added to vertical arrangements around doors and windows on villa facades. The product is not structural and is mounted as decorative cladding onto an existing concrete, stone or other load-bearing surface. When paired symmetrically on both sides, it creates a more orderly appearance in classical, neoclassical and symmetrical facade designs.
Before installation, the surface must be clean, dry, even and sound. If required, make 45° mitre cuts. Install the product with polyurethane (PU) mounting adhesive, and use screws for mandatory mechanical fixing. Fill the joints and screw points, smooth them with 180-220 grit sandpaper, then apply primer and two coats of paint. The factory primer prepares the surface for painting; additional primer is optional, although paint manufacturers may not provide a warranty for applications carried out without their own primer. Polure does not provide a warranty for the paint systems used.
- The P5030D50 Pilaster Column is used to create a column effect on walls and establish vertical architectural divisions
- In living rooms, it can be installed on both sides of a fireplace; in entrance halls, it can highlight door openings; and on stairway walls, it can be arranged in symmetrical pairs
- It can be used in hotel lobbies, restaurants and office reception areas to give the wall behind the reception desk a classical architectural character
- In bedrooms, it can create a decorative frame on both sides of the headboard wall
- On villa and detached-house facades, it can be added to vertical compositions around doors or windows
- For exterior applications, joints and screw points must be sealed with exterior-grade filler, and the surface must be painted with UV-resistant paint
- The P5030D50 is not a structural column; it is applied as decorative cladding to an existing load-bearing surface
- Its 21 x 42 x 19 cm dimensions can be used to create a single architectural accent or to form part of repeated pilaster arrangements along the same axis
- Remove oil, dust and loose particles from the application surface, leaving it clean, dry, even and sound
- Measure the orientation of the pieces and the joint locations, and make any required cuts with a 45° mitre
- Install the P5030D50 on the surface using polyurethane (PU) mounting adhesive only; do not use silicone adhesive
- Mechanical fixing with screws is mandatory in addition to the adhesive
- For wide profiles or exterior applications, determine the fixing method according to the condition of the surface
- Fill the screw heads and joints, then smooth them with 180-220 grit sandpaper
- Paint can be applied over the factory-primed surface; additional primer is optional
- Finish with two coats of suitable paint
- UV-resistant paint is required for exterior applications
- Clean the surface of the P5030D50 Pilaster Column with a soft, dry or slightly damp cloth
- Do not use stiff brushes, abrasive powders, strong solvent-based chemicals or cleaning products that may scratch the surface
- On exterior applications, inspect the paint film, joints and screw points periodically
- Since unpainted polyurethane may yellow, protect it outdoors with UV-resistant paint
- Damaged filler or paint areas can be renewed with suitable products
Can the P5030D50 Pilaster Column be used outdoors?
Yes, the P5030D50 can be used for exterior decoration. The product is applied as decorative cladding to an existing load-bearing surface and does not carry the structural load of the building. For exterior applications, the polyurethane surface must be coated with UV-resistant paint. Joints and screw points must be sealed with exterior-grade filler. Paint selection, surface preparation and application conditions should follow the paint system manufacturer's instructions. Polure does not provide a warranty for the paint brand or paint system used.
How is the Pilaster Column installed and painted?
First, make the surface clean, dry and sound. Make the required cuts with a 45° mitre. Install the product with polyurethane (PU) mounting adhesive; do not use silicone. Mechanical fixing with screws is mandatory. Fill the joints and screw heads, then smooth them with 180-220 grit sandpaper. Apply primer followed by two coats of paint. The factory primer prepares the surface for painting, while additional primer is optional. However, paint manufacturers may not provide a warranty for applications carried out without their own primer.
How durable is the P5030D50, and how much does it weigh?
The P5030D50 has a closed-cell rigid polyurethane structure with a density of 150-220 kg/m³, making it a lighter decorative solution than plaster, concrete and solid wood elements. Since the net product weight depends on the mould geometry and production quantity, its exact weight cannot be calculated from the dimensions alone. The material is technically designed to retain its form within the dimensional stability test range -20 °C / +70 °C, has water absorption below 1% and offers high dimensional stability.
What advantages does a polyurethane Pilaster Column offer over plaster or wood?
A polyurethane Pilaster Column is lighter than plaster and more resistant to impact as a decorative element. Compared with wood, it is more resistant to moisture and decay, and the risks associated with moisture-related deterioration are different. It provides a harder, more detailed surface than EPS foam. The product can be filled, sanded and painted. Nevertheless, the Pilaster Column is decorative and does not perform a structural function like a plaster, wood or concrete column.
Which interior spaces are suitable for the P5030D50?
The P5030D50 can be used in living rooms, entrance halls, stairway walls, bedrooms, hotel lobbies, restaurants and offices. It creates a symmetrical vertical accent on both sides of door openings, around fireplaces or along the edges of wall panels. Its 21 x 42 x 19 cm dimensions should be assessed according to the transition and capital sections of the pilaster composition. Before installation, check that the profile dimensions of the column shaft, base and other decorative components are compatible.