Technical Specifications
| Material | Polyurethane decorative product |
|---|---|
| Surface | Decorative, paintable surface |
| Color | Paintable; current color not specified |
| Density | Belirtilmemiştir |
| Water Absorption | below 1% |
| Dimensional Stability Test | -20 °C / +70 °C |
| Fire Class | B2 (DIN 4102-1) |
| Paintable | Yes |
| Usage | Indoor + Outdoor |
| Water Resistant | Yes |
| Diameter | Ø 42 cm |
| Dimensions | 424 × 424 × 190 mm |
| Sales Unit | piece |
Details
Support
Similar Products(Pilaster Capitals)
A pilaster capital is a decorative architectural element that completes the upper section of a wall-mounted pilaster shaft. The P5030D model can be used to give classical column arrangements greater definition in interior and exterior spaces. Measuring 42x42x19 cm, its square-based, low-profile form provides balanced proportions around doorways, in entrance designs and across facade details.
The P5030D is a polyurethane decorative product made from closed-cell rigid PU. The material has a density of 150-220 kg/m³, providing a lighter solution than plaster, concrete and solid wood while helping the decorative form retain its shape. Water absorption is below 1%. The material is designed to retain its form. However, the component is not structural and must be installed with its own weight and connection loads taken into account.
The P5030D Pilaster Capital visually completes the upper limit of a pilaster arrangement with its defined square proportions and capital profile projecting from the wall. Its visual impact should be assessed together with the width of the pilaster shaft, the other decorative elements around the door or window and the selected paint colour. The factory-primed surface is ready for water-based or synthetic paint. Additional primer is optional, although paint manufacturers may not provide a warranty for applications carried out without their own primer systems.
The pilaster capital can be used above vertical shafts beside doors in entrance halls, in decorative wall arrangements in living rooms or dining rooms, in hotel lobbies, at restaurant entrances and in offices designed with classical lines. On exterior facades, it can be installed at the top of pilasters around windows and doors to add architectural emphasis to villas, mansions or commercial buildings. For exterior use, it must not be left unpainted and should be protected with UV-resistant paint. The capital should be treated as a decorative cladding and architectural design element, not as a replacement for a structural column.
Before installation, the surface must be clean, dry, sound and free from dust; dimensions and contact points should be checked. Required cuts can be made with a 45° mitre joint. Polyurethane (PU) mounting adhesive is used for installation; silicone adhesive is not suitable. Mechanical fixing with screws is mandatory in addition to adhesive. Screw heads and joints are filled, sanded with 180-220 grit sandpaper, then primed and painted with two coats. For wide or heavy applications, the fixing method should be selected according to the surface and component conditions.
Compared with plaster, polyurethane provides a lighter decorative solution with greater resistance to impact; compared with wood, it offers better resistance to moisture and decay. It is harder than EPS foam and better preserves fine decorative details. During a fire, it has fire class B2 (DIN 4102-1). With regular surface care and paint inspections, the P5030D can be repaired and used for a long time as a pilaster capital element.
- The P5030D Pilaster Capital is used to complete the upper section of a pilaster shaft
- It can be installed above pilasters positioned beside doors in entrance halls or used as an architectural finishing element that strengthens wall articulation in classically decorated living rooms
- It can also be combined with door openings or decorative wall panels in hotel lobbies, restaurant entrances and prestigious offices
- On villa and residential facades, it is applied above pilasters around windows or doors to create a more defined architectural rhythm
- Its 42x42 cm base dimensions require a proportionate transition to the pilaster shaft; the shaft width and wall surface must be checked before installation
- The product has a paintable surface
- Water-based or synthetic paint can be used indoors
- On exterior facades, UV-resistant paint is required
- The capital must be positioned as a decorative cladding element rather than a structural column, and the connection loads and load-bearing capacity of the surface should be assessed before installation
- The installation surface must be clean, dry, sound and free from dust
- The P5030D Pilaster Capital is aligned with the pilaster shaft; after checking the dimensions and contact points, a 45° mitre cut can be made if necessary
- Polyurethane (PU) mounting adhesive is applied to the back of the product
- Silicone adhesive must not be used
- Mechanical fixing with screws is mandatory in addition to adhesive; the fixing method should be selected according to the surface type, the product's own weight and the installation conditions
- Screw heads and joints are filled with a suitable filler
- Once curing and surface preparation are complete, the surface is sanded with 180-220 grit sandpaper, additional primer may be applied if preferred, and two coats of paint are added
- On exterior facades, joints and screw points should be sealed with exterior-grade filler, followed by UV-resistant paint as the topcoat
- The P5030D Pilaster Capital should be cleaned with a soft, dry cloth or a lightly dampened cloth
- Do not use stiff brushes, abrasive cleaners, solvents or chemicals that may dull the surface
- Indoors, the painted surface can be inspected regularly and marks from dirt or minor impacts can be addressed
- On exterior facades, the paint coating, joints and screw points should be checked for the effects of sunlight, rainfall and temperature changes
- When maintenance is required, clean the surface, repair any loose paint or filler and renew the finish with a suitable paint system
Can the P5030D pilaster capital be used outdoors?
Yes, the P5030D pilaster capital can be used for exterior facade decoration. It completes the upper section of a decorative pilaster shaft around a window or door. For exterior applications, the product must not be left unpainted and should be protected with UV-resistant paint. Joints and screw points should be sealed with exterior-grade filler. The product is not a structural column; it should be used only as an architectural cladding and decorative element, with the fixing method selected according to the conditions of the surface and component.
How is the P5030D installed and painted?
Once the surface has been made clean, dry, sound and dust-free, check the dimensions. Make a 45° mitre cut if required. Position the P5030D with polyurethane (PU) mounting adhesive and mechanically secure it with screws; silicone must not be used. Fill the screw heads and joints, then sand with 180-220 grit sandpaper. Water-based or synthetic paint can be applied over the factory-primed surface. Additional primer is optional, but the paint manufacturer's application requirements should also be followed.
How durable and heavy is the P5030D pilaster capital?
The P5030D is a lightweight decorative element made from closed-cell rigid PU. Its material density is 150-220 kg/m³ and its water absorption is below 1%. These properties provide lower weight than plaster and solid wood, along with better resistance to moisture. Because the product has its own weight and creates connection loads, mechanical fixing is required. Its service life depends on correct installation, the paint system, exposure to exterior conditions and regular maintenance.
What are the advantages of a polyurethane pilaster capital over plaster or wood?
A polyurethane pilaster capital is a lighter decorative element than plaster and offers greater resistance to breakage. Compared with wood, it is more resistant to moisture and decay. It is harder than EPS foam and better preserves its decorative form. Its closed-cell structure keeps water absorption below 1%. The surface can be filled, sanded and painted. However, the product must not be used as a structural support; it is intended for decorative cladding.
What size of space is suitable for the P5030D pilaster capital?
Measuring 42x42x19 cm, the P5030D is a compact capital form that creates a defined finish above a pilaster shaft. It can be used in medium- and large-scale spaces such as entrance halls, living rooms, restaurants, hotel lobbies and villa facades. For a suitable result, consider the pilaster shaft width, the door or window opening and the surrounding decorative profiles together. Before installation, check the product dimensions on the actual surface and clearly establish the capital's fixing points and its non-structural decorative purpose.