Sign In
Polure
Favorites

Project: Wedding Hall Facade in Tokat (2024)

Tokat, 2024 — a wide hall facade with arched window surrounds, neoclassical columns and a continuous cornice line.

Completed in Tokat in 2024, this wedding hall project was about giving a wide, tall volume an architectural character that reads from a distance. The elevation combines arched window surrounds, a row of columns with neoclassical capitals and a continuous cornice line. Our archive holds 27 application photographs from this project.
Project: Wedding Hall Facade in Tokat (2024)
Project: Wedding Hall Facade in Tokat (2024)

Project data

Location: Tokat Year: 2024 Building type: Wedding hall (commercial) Facade composition: Arched window surrounds + row of neoclassical columns + cornice line Archive: 27 application photographs

Which elements were used?

Window openings were framed with arched surround sets, while columns with neoclassical capitals set the vertical rhythm at the entrance and intermediate axes. A deep-section cornice defined the upper line under the eaves. At this scale, large sections were preferred so the elements read from a distance.

Technical highlights of the installation

Because the work was at height, the lightness of the material was decisive: the polyurethane elements were carried on scaffolding without a crane. Following the outdoor rule, parts were not merely bonded to the surface: they were cross-screwed at the joints, screw heads sunk and filled, then sanded with 180-220 grit. The facade was finished with a UV-resistant elastic exterior paint.

If you are planning a similar project

For a quotation, the facade dimensions (linear metres or m²), current photographs or architectural drawings and the location are enough. The Quantity Calculator on the site lets you estimate the required metres and pieces yourself. Prices cover the product only; if installation is requested it appears as a second item in the quotation.

Frequently Asked Questions

How long did this facade take to install?

The duration depends on facade area and the number of elements. Since the elements are light and easy to cut, a single team can complete a substantial section per day; the adhesive cures in about one hour under normal conditions.

Is an arched window surround a standard product?

Arch elements are in the catalogue; if the radius of the opening differs, production is made to measure. Non-catalogue sizes and motifs can be produced with 3D scanning and CNC.

Can the work be done while the venue is operating?

Usually yes. Because the work is external and dry-fixed there is no demolition or wet trade inside; the programme is planned around the event calendar.

Related Pages

Tokat Wedding Hall Polyurethane Facade Project (2024) | Polure