Polyurethane Faux Wood Beam Corbels Polure

No, the faux wood beam corbels in the Polure collection are structural elements designed purely for decorative purposes. Although their core consists of high-density rigid foam offering a hardness close to wood, they are not engineered to bear structural loads like load-bearing columns or beams. Their primary function is to provide aesthetic harmony at the intersections of ceiling beam systems and walls, adding rustic depth and volume to spaces. They can be safely installed to create a decorative cladding or faux-support appearance beneath actual load-bearing elements.

Thanks to their closed-cell structure, these products are highly resistant to outdoor conditions such as moisture, rain, snow, and frost. With a water absorption rate below 1%, they do not swell, rot, or crack. They maintain their shape and dimensions within a temperature range of -20°C to +80°C. However, unpainted polymer materials can yellow over time when exposed directly to solar UV rays. Therefore, beam corbels and brackets used on exteriors must be painted with UV-resistant exterior paints after installation.

Yes, mechanical fastening with screws is strictly mandatory for safety and long-term durability. Relying solely on adhesive can lead to the product falling if the plaster or paint layer on the wall detaches over time. During installation, polyurethane (PU) construction adhesive should be applied to the back of the product, which must then be mechanically secured to the wall and ceiling with screws at appropriate points. The screw heads are later filled with exterior putty, sanded, and concealed. Silicone-based adhesives should never be used, as their chemical composition does not provide adequate adhesion to this material.

Polure products are shipped with a special factory-applied primer coat. This factory primer prepares the surface for topcoat paint application. Water-based, acrylic, or synthetic paints can be easily applied to the products. However, an important point to consider is that paint manufacturers do not guarantee adhesion on surfaces painted directly without using their own primers. Therefore, applying an additional primer coat is optional and entirely up to the customer's preference. Polure does not provide a warranty or accept liability for the long-term performance and durability of paints applied after installation.

Although solid wood materials look aesthetic, they can warp, twist, crack, and suffer from pest infestations over time due to moisture. Additionally, the heavy weight of wood adds extra static load to structures during installation. In contrast, corbels made of rigid polymer material are extremely lightweight with a density of 150-200 kg/m³, adding no load to the building and allowing easy installation by a single person. They do not rot, mold, or attract pests. Compared to soft materials like EPS foam, they are far more impact-resistant and offer smooth, highly detailed patterns.

Yes, our products feature processing characteristics similar to wood. They can be easily cut at desired angles using standard woodworking tools, hand saws, or miter saws. To ensure a seamless look at corner joints during installation, a 45° miter cut is recommended. Any burrs that may form on the edges after cutting can be smoothed in seconds using 180-220 grit sandpaper. Since the material is solid and homogeneous, no voids or crumbling occur on the cut surfaces, making the application exceptionally clean and precise.