Sign In
Polure
Favorites

How to Cut a 45 Degree Corner: Border and Trim Video

Our own workshop video shows step by step how a polyurethane border or trim corner is cut at 45 degrees and joined.

For a 45 degree corner, the face of the profile that sits against the ceiling or wall is held against the saw fence and the two pieces are cut at matching angles, then joined. Without a mitre saw, the line is marked with an angle finder and cut with a hand saw held square to the profile. If the wall or ceiling corner is not exactly 90 degrees, the cutting angle is adjusted to the real angle of the room.
Perfect 45 Degree Cutting Techniques for Polyurethane Trim and Corner Joints · 1:57

Step-by-Step Application

  1. Set the mitre saw to 45 degrees — The mitre saw is set to 45 degrees and the face of the border that will sit on the ceiling is held against the saw fence.
  2. No saw? Mark the cutting line — An angle finder sets the cutting direction; two points are marked on the profile and joined with a metal square to draw the line.
  3. Keep the hand saw square — The profile is held firmly on the bench by hand and the saw follows the line, square to the profile, in one straight pass so the two pieces meet without gaps.
  4. Bring the pieces together — The two cut pieces are offered up as a corner on the bench to check that the patterns line up and the cut faces are clean.
  5. Bond the cut faces — A fast-setting adhesive is applied to the cut face and the pieces are pressed together to close the corner. For fixing to the wall or ceiling, PU-based mounting adhesive is applied to the back of the profile.

Frequently Asked Questions

How do I cut the corner if the wall is not at 90 degrees?

Measure the real corner angle first. If it differs from 90 degrees, set each piece to half of that angle. The cutting direction differs between inside and outside corners, so try the first cut on an offcut.

Do I need a mitre saw to cut corners?

No. An angle finder, a square and a hand saw also give a clean corner; what matters is marking the line accurately and keeping the blade square to the profile. Models with a ready-made corner piece may need no cut at all; send us the model code to check.

Related Pages

Products in This Guide

Get a price quote for your project

Product code: P2001 · P2001A · P2001B +5