Poliüretan classical living room decor creates architectural cohesion by combining layered profiles at the ceiling corners with a central medallion and a vertical column detail. Against the dark navy surface, the embossed profiles are defined with gold accents. A circular ceiling rose anchors the centre, while the surrounding square frames, bead mouldings and small corner ornaments create varied levels of depth. The composition guides the eye from the ceiling plane to the wall junction and the column capital.
The key products in this ceiling arrangement are decorative ceiling coffers and cornice mouldings. Stepped coffer lines divide the upper part of the room into defined sections rather than leaving it as one uninterrupted surface, while beaded borders emphasise the transitions. The central rose can frame a lighting point as a decorative focal element. This layout can be adapted to suit high-ceilinged classical living rooms, hotel lobbies and villa entrances. Because the design is richly detailed, profile widths and spacing should be assessed together with the existing ceiling dimensions.
The polyurethane fluted column and Corinthian capital on the wall continue the ceiling composition vertically. The fluted shaft introduces a regular vertical rhythm, while the botanical relief on the capital connects visually with the ornamented character of the ceiling corner. The column is decorative and does not carry structural loads; it is not a replacement for existing concrete, steel or other load-bearing elements. Classical wall mouldings on either side of the column create a framed-panel effect, dividing the broad wall surface into more controlled sections. This provides an orderly backdrop for furniture and lighting arrangements.
High-density cast polyurethane decoration products have a density of 150-220 kg/m³, and products with a closed-cell structure have water absorption below 1%. The products have been tested for dimensional stability between -20 °C / +70 °C. The factory-primed surface can be finished with water-based or synthetic paint; the navy-and-gold effect shown can be achieved through a suitable colour combination and detailed painting. Installation uses polyurethane mounting adhesive, with screws or wall plugs where required and mechanical support for wide profiles; silicone is not used. Products are made to order and supplied ex works.
Design Details
The ceiling corner gains a distinct architectural frame through the layered placement of different profiles. At the centre, the circular rose softens the coffer geometry and defines the lighting point. Bead mouldings combined with embossed borders create a rhythmic interplay of light and shadow across the surface. The fluted column with a Corinthian capital is a vertical element that carries the ceiling ornamentation onto the wall plane. Wall mouldings establish a symmetrical panel arrangement on both sides of the column, balancing the proportions of the broad surfaces. The dark background and metallic accents make the profiles and relief depth of the polyurethane details more visible.
