Polyurethane Products

Custom Production of Polyurethane Door Trim and Door Surround Panels

Published: 2026-10-29 · Duration: 1:10 · Watch on YouTube

This video shows the workshop production process for polyurethane door trim and door surround panels. It covers profile cutting, corner joining, application to the panel, painting, and packaging for shipment step by step.

Scenes from the video

A miter-cut corner joint of a polyurethane profile is checked by hand

Spray adhesive is applied to the inner edge of a white frame profile

The joined decorative profile corner is examined on the workbench

Polyurethane profile pieces are held side by side before the corner joint

The corner fit of a rectangular panel frame is checked by hand

The cut ends of stepped profile pieces are brought together at the corner

A decorative profile corner is joined with the lines properly aligned

The profile is marked for a corner cut

A miter-cut profile corner is checked by aligning it with the fingers

The placement of the inner and outer frames on the panel is arranged

Profile positions are checked on a long door surround panel

Adhesive is sprayed onto the joining surface of a decorative profile piece

The corner connection of a two-step profile is examined closely

Preparation is made to attach a rectangular frame to the panel surface

Adhesive is applied with a gun along the frame line on the panel

The positioned profile is pressed against the panel surface to secure it

The corner joint and continuity of the profile lines are checked by hand

The frame profile is pressed along its length to seat it evenly on the surface

A continuous line of adhesive is applied to the rectangular application area of the panel

A rectangular adhesive line is visible on a light-colored panel

Stay up to date with our new videos

Subscribe to our YouTube channel and follow our social media accounts so you never miss our production, application and installation videos.

Subscribe on YouTube