Ionic Pilaster Capital
Polure ionic pilaster capital features classic spiral volute motifs for crowning wall-mounted pilasters and decorative wall pillars. Molded from high-density rigid polyurethane (150-220 kg/m³), this capital possesses wood-like physical durability while being lightweight for effortless mounting. Closed-cell matrix design ensures water absorption stays below 1%, protecting against dampness, rot, mold, and insect damage in both indoor and outdoor applications. Thermally stable across -100 °C / +80 °C, it meets B2 fire safety criteria for self-extinguishing flame resistance. Arriving pre-coated with factory white acrylic technical primer, installation entails continuous PU assembly adhesive on contact joints plus mechanical countersunk screws. Fill joint lines with acrylic putty, sand smooth with 180-220 grit paper, and finish with quality topcoat paint.
Frequently Asked Questions
What material is Polure ionic pilaster capital made of?
It is molded from high-density rigid polyurethane (150-220 kg/m³), providing sharp detail, wood-like strength, and lightweight handling.
How is Polure ionic pilaster capital installed?
Apply continuous polyurethane assembly adhesive to contact faces and secure with mechanical countersunk screws. Silicone adhesive is forbidden.
Can Polure ionic pilaster capital be used on outdoor walls?
Yes. With water absorption under 1% and thermal stability between -100 °C / +80 °C, it withstands rain and sun without degrading.
What painting steps are needed for ionic pilaster capitals?
Pre-primed in white acrylic at the factory. Sand lightly with 180-220 grit paper and apply topcoat paint.
Is Polure ionic pilaster capital load-bearing?
No, it is a decorative wall capital. Structural loads must be carried by independent framing.