Roof Window
A roof window is installed in a pitched roof or close to the roof surface to provide daylight and ventilation. Polyurethane window surrounds, casings and outer frame profiles used around the opening define its visible edge decoratively; they do not replace the window’s waterproofing system or the structural roof. These elements are selected to organise the visible transition between the roof window and the surrounding cladding. Cast polyurethane has a density of 150-220 kg/m³ and is lighter than plaster and solid timber details, making handling and installation easier. Its water absorption rate is below 1%, helping reduce the risk of moisture-related deformation. The factory-primed surface can be painted with water-based or synthetic paint. Dimensional stability has been assessed within a -20 °C / +70 °C test range. Polyurethane decorative elements around roof windows are cast in moulds, supporting consistent profiles along repeated frame lines within the same project. Installation uses polyurethane mounting adhesive, with screws and wall plugs where required.
Related Galleries
Frequently Asked Questions
Can polyurethane window surrounds be used around roof windows?
Yes. Polyurethane surrounds and casings can define the visible frame of a roof window decoratively. These profiles do not replace the window’s waterproofing details.
Are polyurethane roof window surround profiles moisture-resistant?
Cast closed-cell polyurethane has a water absorption rate below 1%. This structure helps provide resistance to moisture-related deterioration.
How is a roof window surround installed?
The profile is fixed to a properly prepared surface with polyurethane mounting adhesive. Screws and wall plugs can be added where the profile section and installation require them.

