Ionic Pilaster Capital
Polure Ionic pilaster capitals crown wall-mounted decorative pilasters with Classical Greek volutes and ornate scrollwork. Molded from high-density rigid polyurethane (150-220 kg/m³), these capitals deliver deep architectural relief while remaining lightweight. They are decorative and strictly non-load-bearing; structural loads must be supported by interior steel or wood framing. Built with a closed-cell matrix, water absorption is under 1%, ensuring they will not warp, swell, rot, or harbor mold. Heat and cold resistant from -100 °C / +80 °C with a B2 fire rating, they perform outdoors when painted with UV-resistant exterior coating. Delivered factory pre-primed in white acrylic, installation involves cutting to match pilaster shafts, applying continuous polyurethane assembly adhesive on all contact edges, and securing with countersunk screws.
Frequently Asked Questions
Can Polure Ionic pilaster capitals support structural loads?
No, Polure Ionic pilaster capitals are purely decorative and non-load-bearing. Any structural weight must be held by internal steel profiles.
What material is used to produce Ionic pilaster capitals?
They are produced from high-density rigid polyurethane (150-220 kg/m³), featuring high durability and B2 fire resistance rating.
Can Ionic pilaster capitals be installed on exterior building facades?
Yes. Water absorption is under 1%, and when painted with UV facade paint, they withstand sun, rain, and freezing temperatures.
How are Ionic pilaster capitals mounted to the wall?
Apply continuous polyurethane assembly adhesive to contact faces and fasten with screws. Silicone adhesive is strictly forbidden.