Wall Pediment
Polure wall pediments bring architectural distinction and classical structural elegance to interior doors, window frames, and wall panels. Manufactured from high-density rigid polyurethane (150-220 kg/m³), these pediments offer wood-like mechanical durability while remaining light enough to install without adding heavy structural load. Resistant to moisture with water absorption below 1%, they will not rot, warp, or mold over time. Each pediment is pre-treated with factory-applied white acrylic primer, allowing straightforward topcoat application using water-based or synthetic paints. Installation requires polyurethane assembly adhesive along contact surfaces combined with countersunk screws for permanent mechanical support.
Frequently Asked Questions
What material is used to manufacture Polure wall pediments?
Polure wall pediments are manufactured from high-density rigid polyurethane (150-220 kg/m³), offering wood-like impact resistance, lightweight handling, and a B2 fire safety class.
Can wall pediments be installed in humid indoor environments?
Yes, with water absorption below 1%, polyurethane wall pediments will not rot, swell, or develop mold, making them suitable for any humid room.
How should a wall pediment be installed?
Surface must be clean and dry. Apply continuous PU assembly adhesive on all contact edges, secure with countersunk screws, fill screw holes with acrylic putty, and sand smooth before painting.
Is silicone recommended for attaching wall pediments?
No, silicone is strictly forbidden because it lacks structural bonding strength. Only polyurethane assembly adhesive paired with screws must be used.