Wall Panel Corners
Polure wall panel corners establish clean transitions and ornate framed borders across decorative interior wall paneling and wainscoting installations. Precision-molded from high-density rigid polyurethane (150-220 kg/m³), these corner elements combine high impact resistance with crisp architectural relief without adding weight to drywall surfaces. Their closed-cell structure keeps water absorption strictly under 1%, safeguarding wall panel layouts from moisture damage, warping, and mold in kitchens, bathrooms, or high-traffic corridors. Built for long-term dimensional stability between -100 °C / +80 °C and rated fire Class B2, each piece arrives pre-coated with factory white acrylic primer. Installation requires measuring 45° miter cuts on adjoining moldings, applying a continuous bead of polyurethane assembly adhesive on wall contact edges (silicone is strictly forbidden), and fixing with countersunk screws. Screw heads are filled with acrylic filler, lightly sanded with 180-220 grit, and topcoated with two coats of interior paint.
Frequently Asked Questions
What density material is used in Polure Wall Panel Corners?
Polure Wall Panel Corners are produced from high-density rigid polyurethane (150-220 kg/m³), guaranteeing sharp detailing and impact strength.
Are Wall Panel Corners suitable for moist rooms like bathrooms?
Yes, with water absorption under 1%, they will not absorb moisture, swell, or mold in damp areas.
What adhesive must be used when fitting Wall Panel Corners?
Always use polyurethane assembly adhesive along with mechanical screws. Standard silicone adhesive is strictly prohibited.
How should Wall Panel Corners be painted?
After joint filling and light sanding with 180-220 grit paper, apply two coats of water-based or synthetic paint.