Wall Panel Corner
Polure wall panel corners provide pre-molded 90-degree decorative joiners, carved frame corner elements, and wainscoting panel corner motifs for elegant wall paneling layouts. Manufactured from high-density rigid polyurethane (150-220 kg/m³), this corner component delivers timber-like mechanical strength and impact resistance without plaster fragility or wood miter gaps. Featuring closed-cell waterproofing with under 1% water absorption, it will not rot, swell, or foster mold in humid dining halls or bath suites. Engineered to perform in temperatures from -100 °C / +80 °C with B2 fire safety compliance, every panel corner arrives factory-primed with a white acrylic technical primer. Bond to wall substrates using continuous polyurethane assembly adhesive paired with countersunk mechanical screws into drywall anchors. Sand smooth (180-220 grit) and coat with water-based interior paint.
Frequently Asked Questions
What material is used in the Polure wall panel corner?
The Polure wall panel corner is manufactured from high-density rigid polyurethane (150-220 kg/m³), offering wood-like durability and a B2 fire rating.
Why use pre-molded wall panel corners instead of miter-cutting mouldings?
Pre-molded corners save installation time, ensure perfect 90-degree ornamental details, and prevent open miter joints.
How is a wall panel corner attached to the wall?
It is installed using continuous polyurethane assembly adhesive on the rear contact surface combined with mechanical screws into wall plugs. Silicone is forbidden.
What paint should be applied to a wall panel corner?
Apply water-based acrylic interior paint after lightly sanding the white factory primer with 180-220 grit paper.