Wall Panel Carvings
Polure wall panel carvings transform interior walls into grand architectural statements with classical boiserie frames and relief medallions. Molded from rigid high-density polyurethane (150-220 kg/m³), these panel carvings combine the authentic tactile texture of solid wood carvings with structural lightness and impact durability. Their closed-cell polymer structure ensures water absorption below 1%, protecting wall cladding against moisture distortion, swelling, and mold growth. Each carving comes factory-primed with a smooth white acrylic coat. Installation requires applying a continuous line of polyurethane assembly adhesive across back contact boundaries and securing with countersunk screws. Fill joint seams and screw heads with facade acrylic putty, sand smooth with 180-220 grit sandpaper, and coat with two coats of paint.
Frequently Asked Questions
What density polyurethane is used for Polure wall panel carvings?
Polure wall panel carvings are molded from high-density rigid polyurethane (150-220 kg/m³), matching wood's structural toughness.
Can wall panel carvings be installed in high-humidity rooms?
Yes, with water absorption under 1%, these polyurethane carvings will not swell, rot, or mold in humid interiors.
What adhesive should be applied to wall panel carvings?
Continuous polyurethane assembly adhesive must be applied on all rear contact surfaces. Silicone adhesive is forbidden.
Is mechanical screw fixing mandatory for wall panel carvings?
Yes, dual attachment combining polyurethane adhesive with countersunk mechanical screws guarantees permanent installation.
How should wall panel carvings be painted after installation?
Lightly sand with 180-220 grit paper, fill screw recesses with acrylic putty, and apply two coats of water-based or synthetic paint.