Wall Panel Carving
Polure wall panel carvings bring intricate hand-carved aesthetics and historic relief detail to wainscoting frames, accent walls, and entrance foyers. Manufactured from high-density rigid polyurethane (150-220 kg/m³), these carved wall appliques provide wood-like mechanical durability without adding structural weight. The closed-cell material features under 1% water absorption, preventing warping, rotting, or mold in humid indoor areas. Rated B2 fire class, they perform reliably across temperatures from -100 °C / +80 °C. Factory-coated in a white acrylic primer, each piece accepts acrylic, water-based, or synthetic topcoat paints. Installation requires continuous polyurethane assembly adhesive paired with mechanical screw fasteners.
Frequently Asked Questions
What material is Polure wall panel carving made from?
Polure wall panel carvings are made from high-density rigid polyurethane (150-220 kg/m³), providing wood-like impact strength and B2 fire class safety.
Can wall panel carvings be used in humid locations like bathrooms?
Yes. With water absorption under 1%, polyurethane carvings will not swell, rot, or harbor mold in damp conditions.
What adhesive must be used to mount a wall panel carving?
Continuous polyurethane assembly adhesive is required along rear contact faces with countersunk screws. Silicone is forbidden.
How should Polure wall panel carvings be prepared prior to painting?
Lightly sand the factory white acrylic primer with 180-220 grit sandpaper to remove residue, then apply two coats of paint.