Patterned Panel Corner
Polure patterned panel corner delivers intricate classical corner accents engineered to join wall panel mouldings and wainscoting frames at 90-degree intersections. Molded from high-density rigid polyurethane (150-220 kg/m³), this ornate corner piece provides wood-like mechanical toughness while keeping wall structural load minimal. Featuring a closed-cell physical matrix, its water absorption stays strictly below 1%, ensuring complete immunity to moisture, swelling, rot, and mold in humid rooms like bathrooms and kitchens. Fire-rated to class B2 and thermally stable between -100 °C / +80 °C, each piece is supplied factory pre-coated in white acrylic primer. Installation requires clean surfaces, applying a continuous bead of polyurethane assembly adhesive on wall contact backs, and compulsory mechanical fixing with countersunk screws. Silicone adhesive is strictly forbidden. Joint lines and screw indentations are filled with acrylic filler, sanded smooth with 180-220 grit paper, and finished with interior water-based or synthetic topcoats.
Frequently Asked Questions
What material is Polure patterned panel corner made from?
It is manufactured from high-density rigid polyurethane (150-220 kg/m³), combining wood-like strength with lightweight handling and B2 fire class.
Can patterned panel corner be installed in wet areas like bathrooms?
Yes. Water absorption is strictly under 1%, making it completely impervious to rot, swelling, or mold in humid rooms.
How is a patterned panel corner installed?
Apply continuous PU assembly adhesive to contact backs and secure with countersunk screws. Silicone is forbidden. Fill screw holes with putty and sand smooth.
What paint finish is recommended for patterned panel corner?
Use interior water-based or synthetic paints for indoors, applied after light sanding with 180-220 grit paper.