Smooth Wall Framing Profile
Smooth wall framing profiles produced from high-density rigid polyurethane (150-220 kg/m³) deliver clean geometric paneling for modern and classical wall paneling. Featuring high impact resistance and dimensional stability equal to timber, these trim profiles will not shrink, twist, or sag over time. With closed-cell water absorption under 1%, they offer complete moisture protection for interior living areas, high-traffic corridors, and humid bath microclimates (-100 °C / +80 °C). Pre-primed with a smooth white acrylic technical primer, Polure wall framing profiles allow rapid topcoat application with water-based, synthetic, or cellulosic paints. Installation requires clean wall surfaces, 45° miter cuts, continuous PU assembly adhesive, and mechanical screw fixing (silicone adhesive is strictly forbidden). Lightly sand with 180-220 grit paper before painting to ensure complete coat adhesion.
Frequently Asked Questions
What material are smooth wall framing profiles made of?
They are manufactured from high-density rigid polyurethane (150-220 kg/m³), ensuring high impact strength and 100% moisture resistance.
Can smooth wall framing profiles be used in humid rooms like bathrooms?
Yes, water absorption is under 1%, so they will not warp, swell, rot, or attract mold.
What adhesive should be used for smooth wall framing profiles?
Mount using continuous PU assembly adhesive along with countersunk screws. Silicone is strictly forbidden.