Roman Column Model
Polure Roman column models recreate classical Greco-Roman architectural majesty for interior halls, entrance porticos, and garden pergolas. Crafted from high-density rigid polyurethane (150-220 kg/m³), these hollow decorative columns deliver wood-like structural durability while remaining lightweight and non-load-bearing. Their closed-cell core absorbs less than 1% water, ensuring resistance against rot, moisture, and pest infestation in any climate. Thermally stable from -100 °C / +80 °C and rated B2 for fire safety, they come pre-primed with white acrylic primer ready for custom painting. Standard sizes range across 20, 30, 40, 50, 60, and 80 cm diameters with a standard 240 cm height, available in full round or half-wall (pilaster) configurations. Installation requires continuous polyurethane assembly adhesive at base/capital contact points and joint seams, combined with mechanical screw attachment. IMPORTANT: Columns are purely decorative and NON-LOAD-BEARING; structural loads must be supported by an internal steel post, and concrete MUST NEVER be poured inside.
Frequently Asked Questions
Are Polure Roman column models load-bearing?
No, Polure Roman columns are strictly decorative and NON-LOAD-BEARING. Structural loads must be carried by an internal steel post inside the hollow core.
Can concrete be poured inside a Polure Roman column?
ABSOLUTELY FORBIDDEN. Concrete must NEVER be poured inside polyurethane columns as cure expansion will split the shell.
What standard diameters and heights are available for Roman columns?
Standard column diameters are 20, 30, 40, 50, 60, and 80 cm, with a standard shaft height of 240 cm.
How are Roman column sections joined during installation?
Sections are glued using continuous polyurethane assembly adhesive on all contact edges, screwed together, filled with acrylic putty, sanded, and painted.