Relief Carvings
Polure relief carvings bring deep three-dimensional architectural artistry to walls, ceilings, and furniture panels. Molded from rigid high-density polyurethane (150-220 kg/m³), these sculptural carved ornaments feature sharp undercut details and smooth contours while possessing wood-like mechanical toughness without heavy weight. Their closed-cell polymer structure ensures water absorption below 1%, protecting carvings from swelling, warping, and mold growth in kitchens, bathrooms, or outdoors (-100 °C / +80 °C). Each carving comes factory-primed with a smooth white acrylic coat. Installation requires applying a continuous line of polyurethane assembly adhesive across back contact boundaries and securing with countersunk screws. Fill joint seams and screw heads with facade acrylic putty, sand smooth with 180-220 grit sandpaper, and coat with two coats of paint.
Frequently Asked Questions
What material density is used in Polure relief carvings?
Polure relief carvings are manufactured from rigid high-density polyurethane (150-220 kg/m³).
Can relief carvings be installed in humid locations?
Yes, with water absorption below 1%, these polyurethane carvings will not rot, swell, or mold in damp spaces.
What adhesive should be used for installing relief carvings?
Continuous polyurethane assembly adhesive must be applied along all rear contact surfaces. Silicone adhesive is forbidden.
Is mechanical screw fixing mandatory for relief carvings?
Yes, dual attachment combining polyurethane adhesive with countersunk mechanical screws guarantees permanent installation.
How should relief carvings be painted after installation?
Lightly sand with 180-220 grit paper, fill screw recesses with acrylic putty, and apply two coats of water-based or synthetic paint.