Relief Carved Pillar
The Polure relief carved pillar brings deep 3D sculptural detailing and opulent classical craftsmanship to entrance foyers, facade features, and interior halls. Crafted from high-density rigid polyurethane (150-220 kg/m³), this ornamental pillar provides wood-like structural durability while remaining lightweight to prevent wall loading. Featuring a closed-cell composition with less than 1% water absorption, it will not warp, swell, rot, or attract mold in humid settings or under harsh outdoor conditions. Designed to maintain dimensional integrity across -100 °C / +80 °C with B2 fire safety compliance, it comes factory-primed with a white acrylic coating. Installation requires miter trimming, continuous polyurethane assembly adhesive on contact edges, and mechanical screw fastening. Fill joints and screw holes with acrylic putty, sand smooth using 180-220 grit, and finish with your chosen topcoat.
Frequently Asked Questions
What material is the Polure relief carved pillar made of?
It is manufactured from high-density rigid polyurethane (150-220 kg/m³), providing timber-like strength and a B2 fire safety rating.
Can a relief carved pillar be installed outdoors?
Yes, with water absorption below 1% and thermal resilience from -100 °C / +80 °C, it withstands outdoor climate exposure.
How is a relief carved pillar attached during installation?
It must be installed using continuous polyurethane assembly adhesive paired with countersunk mechanical screws. Silicone is forbidden.
Is the relief carved pillar load-bearing?
No, relief carved pillars are decorative non-load-bearing architectural elements.