Polyurethane Wall Moulding
Polure polyurethane wall moulding defines interior and exterior wall surfaces with refined geometric frames and architectural elegance. Crafted from high-density rigid polyurethane (150-220 kg/m³), this moulding matches the visual sophistication of traditional plaster while providing wood-like impact resistance and durability. With water absorption under 1%, its closed-cell matrix prevents moisture penetration, rot, or mold growth, making it suitable for living areas, damp bathrooms, and exterior facades. Maintaining structural integrity from -100 °C / +80 °C with B2 fire safety performance, each length comes pre-primed with white acrylic primer. Installation is executed using continuous polyurethane assembly adhesive and countersunk screws.
Frequently Asked Questions
What density is Polure polyurethane wall moulding made from?
It is manufactured from high-density rigid polyurethane (150-220 kg/m³), giving it structural strength comparable to wood.
Can polyurethane wall moulding be installed in high-humidity areas?
Yes, water absorption below 1% ensures it will not swell, rot, or harbor mold in bathrooms or kitchens.
How is polyurethane wall moulding installed on wall surfaces?
Apply continuous PU assembly adhesive to contact surfaces and joints, then secure with mechanical countersunk screws. Silicone is forbidden.
What paint finish can be applied to polyurethane wall moulding?
After light sanding (180-220 grit), apply two coats of water-based, synthetic, or cellulosic paint over the white acrylic primer.