Polyurethane Pilaster Capital
Polure polyurethane pilaster capitals top flat wall-mounted half-columns with stately Doric, Ionic, or Corinthian classical motifs. Molded from rigid high-density polyurethane (150-220 kg/m³), these ornamental capitals replicate crisp carved stone details while remaining lightweight and impact-resistant. Closed-cell polymer engineering limits water absorption below 1%, making capitals completely rot-proof, mold-proof, and suitable for interior feature walls or exterior facade pilasters (-100 °C / +80 °C). Each piece comes factory-primed with white acrylic primer ready for water-based or synthetic paints. Installation requires applying continuous polyurethane assembly adhesive on back contact edges and joinery lines, supported by countersunk mechanical screws into wall anchors. Fill screw holes with acrylic putty, sand smooth with 180-220 grit paper, and coat with two coats of paint.
Frequently Asked Questions
What density material is used in Polure polyurethane pilaster capitals?
Polure polyurethane pilaster capitals are molded from rigid high-density polyurethane (150-220 kg/m³).
Can polyurethane pilaster capitals be installed outdoors?
Yes, with water absorption below 1% and a temperature range of -100 °C / +80 °C, they excel on exterior facade pilasters.
What adhesive should be applied to polyurethane pilaster capitals?
Polyurethane assembly adhesive must be applied along all wall contact and joining edges. Silicone adhesive is forbidden.
Are countersunk screws required for mounting polyurethane pilaster capitals?
Yes, dual attachment combining polyurethane adhesive with countersunk screws ensures permanent structural stability.
How should polyurethane pilaster capitals be painted after mounting?
Lightly sand with 180-220 grit sandpaper, fill screw recesses with acrylic putty, and apply two coats of paint.