Polyurethane Leaf Ornament
Polure polyurethane leaf ornaments bring nature-inspired classical elegance to ceilings, wall panels, and door crowns. Molded from rigid high-density polyurethane (150-220 kg/m³), these botanical reliefs capture delicate acanthus and laurel leaf details while delivering wood-like mechanical durability without structural weight. Closed-cell polymer technology keeps water absorption below 1%, making the ornament immune to rot, swelling, mold, and humidity damage indoors or outdoors (-100 °C / +80 °C). Factory-coated with white acrylic primer, each piece is primed for water-based, synthetic, or gilding paints. Installation requires cleaning the substrate, spreading continuous polyurethane assembly adhesive on contact edges, and anchoring with countersunk screws. Fill screw recesses and joints with acrylic putty, sand smooth using 180-220 grit sandpaper, and coat with two coats of paint.
Frequently Asked Questions
What density polyurethane is used for Polure polyurethane leaf ornaments?
Polure polyurethane leaf ornaments are molded from high-density rigid polyurethane (150-220 kg/m³).
Can polyurethane leaf ornaments be installed in wet areas like bathrooms?
Yes, with water absorption under 1%, these polyurethane ornaments will not swell, mold, or rot in damp rooms.
What adhesive must be used to mount polyurethane leaf ornaments?
Continuous polyurethane assembly adhesive must be applied along all rear contact edges. Silicone is strictly forbidden.
Are countersunk screws required for installing polyurethane leaf ornaments?
Yes, dual attachment combining polyurethane adhesive with countersunk screws ensures maximum holding stability.
How should polyurethane leaf ornaments be painted after mounting?
Lightly sand with 180-220 grit paper, fill screw heads with acrylic putty, and apply two coats of paint.