Patterned Wall Moulding
Polure patterned wall moulding brings rich relief detailing and classical elegance to interior wall panels, wainscoting, and exterior building facades. Engineered from high-density rigid polyurethane (150-220 kg/m³), this trim profile matches the refined craftsmanship of carved wood while providing high impact resistance against daily wear. Featuring a closed-cell matrix with water absorption under 1%, it remains totally resistant to humidity, preventing swelling, warping, and mold growth in bathrooms and outdoor settings. Operating with dimensional stability from -100 °C / +80 °C under B2 fire safety standards, each profile is factory pre-coated with a white technical acrylic primer. Installation is completed by applying continuous polyurethane assembly adhesive paired with mechanical countersunk screws.
Frequently Asked Questions
What density is used for Polure patterned wall moulding?
It is crafted from high-density rigid polyurethane (150-220 kg/m³), ensuring superior physical durability.
Is patterned wall moulding water-resistant for bathroom use?
Yes, water absorption below 1% prevents rot, swelling, and mold in damp interior or exterior spaces.
How should patterned wall moulding be installed?
Apply continuous PU assembly adhesive along contact surfaces and join seams, then mechanically secure with countersunk screws. Silicone is forbidden.
How do you finish joints on patterned wall moulding?
Fill joints and screw holes with acrylic putty, sand smooth with 180-220 grit, and apply topcoat paint.