Corinthian Capitals
Polure Corinthian capitals embody the peak of classical architectural luxury with intricate acanthus leaf relief carvings and delicate volutes. Precision-molded from high-density rigid polyurethane (150-220 kg/m³), these hollow capitals provide wood-like mechanical durability while remaining light enough to eliminate structural stress on ceilings or porticos. Featuring a closed-cell polymer structure with water absorption under 1%, they offer complete immunity to humidity, decay, and mold. Operating reliably across temperatures from -100 °C / +80 °C with Class B2 fire safety certification, each capital comes factory pre-coated with white acrylic primer. Note that Polure Corinthian capitals are strictly decorative non-load-bearing components; structural loads must be supported by an internal steel profile. Never pour concrete inside. Installation requires applying continuous polyurethane assembly adhesive on contact joints (silicone is strictly forbidden) and securing with countersunk mechanical screws. Fill screw holes with putty, sand smooth with 180-220 grit paper, and apply two coats of paint.
Frequently Asked Questions
Are Polure Corinthian Capitals load-bearing?
No, Polure Corinthian Capitals are strictly decorative and NON-LOAD-BEARING. Structural loads must be supported by an internal steel profile.
Can concrete be poured inside Corinthian Capitals?
NEVER pour concrete inside Corinthian Capitals as it will damage and distort the rigid polyurethane shell.
What density material is used in Polure Corinthian Capitals?
Polure Corinthian Capitals are molded from high-density rigid polyurethane (150-220 kg/m³), offering wood-like strength.
What adhesive should be used for installing Corinthian Capitals?
Always use polyurethane assembly adhesive combined with mechanical screws countersunk into the profile. Silicone is strictly forbidden.