Ornate Carved Pillar
Polure ornate carved pillars deliver classical grandiosity and intricate architectural detail to modern interior and exterior spaces. Manufactured from high-density rigid polyurethane (150-220 kg/m³), each pillar shaft features sharp, deeply detailed relief carving with wood-like strength and high impact resistance. Designed as decorative, hollow non-load-bearing elements, they can conceal existing structural steel supports or utility lines while adding timeless elegance. With less than 1% water absorption and a B2 fire safety rating, these pillars resist humidity, rotting, and insects. Pre-primed with white acrylic primer, installation involves applying continuous lines of PU assembly adhesive along mounting seams alongside mechanical screw fastening.
Frequently Asked Questions
Are Polure ornate carved pillars load-bearing?
No, Polure ornate carved pillars are hollow decorative elements and non-load-bearing; structural loads must be supported by an internal steel column.
What density is used for the ornate carved pillar?
The ornate carved pillar is molded from high-density rigid polyurethane (150-220 kg/m³), providing wood-like mechanical durability and crisp details.
Can concrete be poured inside the ornate carved pillar?
No, pouring concrete inside the hollow pillar shaft is strictly forbidden as expansion forces can rupture the polyurethane structure.
How is the ornate carved pillar installed?
Installation requires cleaning surfaces, applying continuous PU assembly adhesive to all joint edges (no silicone), and securing with countersunk screws.
Is the ornate carved pillar suitable for outdoor facades?
Yes, it resists water (<1% absorption) and temperatures from -100 °C / +80 °C; outdoors it must be finished with UV-resistant exterior paint.