Molded Ceiling Profile
Polure molded ceiling profile adds crisp architectural definition and clean contours to room perimeters and ceiling borders. Cast from high-density rigid polyurethane (150-220 kg/m³), it delivers the physical impact resistance of timber while remaining remarkably light and easy to mount. Its closed-cell composition ensures water absorption stays below 1%, making it completely resistant to humidity, warping, and fungal spores in wet environments like bathrooms, spas, and kitchens. Rated B2 for fire resistance and stable from -100 °C / +80 °C, it withstands thermal fluctuations without cracking. Arriving pre-coated with a factory white acrylic primer, installation requires clean wall surfaces, 45° miter cuts with a fine saw, a continuous bead of PU assembly adhesive along all joint contact edges, and countersunk screws. Fill screw heads with acrylic putty, sand smooth with 180-220 grit paper, and paint with water-based paints.
Frequently Asked Questions
What density material is used for the Polure molded ceiling profile?
The Polure molded ceiling profile is manufactured from high-density rigid polyurethane (150-220 kg/m³).
Is the molded ceiling profile suitable for wet areas?
Yes, water absorption is below 1%, ensuring full immunity to rot, mold, and humidity damage.
What adhesive should be used for installing the molded ceiling profile?
Use a continuous bead of PU assembly adhesive on all contact edges along with countersunk screws. Silicone is forbidden.
Does the molded ceiling profile need primer before painting?
No, it comes factory-primed with white acrylic primer. After light sanding, you can directly apply topcoat paint.