Modular Dental Molding
Polure modular dental molding introduces classic dentil block architecture into interior cornices and exterior facade friezes. Molded from high-density rigid polyurethane (150-220 kg/m³), this repeating tooth pattern delivers authentic masonry appearance without heavy weight or structural stress. Its closed-cell physical core ensures water absorption stays below 1%, preventing swelling, rot, or mold growth in kitchens, bathrooms, or exposed building exteriors. Rated to B2 fire safety standards and thermally stable from -100 °C / +80 °C, each module arrives pre-coated with factory white acrylic primer. Installation requires clean mounting surfaces and sharp 45-degree miter cuts using a fine-tooth saw. Apply a continuous bead of polyurethane assembly adhesive on all contact edges; silicone sealant is strictly prohibited. Screw attachment is mandatory for permanent security. Screw depressions and joints are filled with acrylic filler, sanded flat with 180-220 grit paper, and finished with interior paints or exterior UV-resistant paints.
Frequently Asked Questions
What material is Polure modular dental molding made from?
It is crafted from high-density rigid polyurethane (150-220 kg/m³), offering wood-like impact strength and a B2 fire safety class.
Can modular dental molding be installed outdoors or in damp rooms?
Yes. Water absorption is under 1%, ensuring it will not swell, rot, or harbor mold indoors or on exterior facades.
How is modular dental molding mounted?
Use continuous polyurethane assembly adhesive paired with countersunk screws. Silicone is forbidden. Fill screw heads with putty and sand.
What paint should be applied to modular dental molding?
It comes pre-primed with white acrylic. Paint with interior water-based paints, or UV-resistant exterior paint for outdoor installations.