Modern Architectural Molding
Polure Modern Architectural Molding delivers sleek geometric lines and minimalist aesthetic transitions for contemporary residential and commercial interiors. Crafted from high-density rigid polyurethane (150-220 kg/m³), this architectural profile offers exceptional impact resistance and wood-like structural strength while keeping overall weight minimal. Featuring a 100% closed-cell composition with water absorption below 1%, it is fully immune to swelling, rot, or mold growth, making it ideal for moisture-prone areas like spa zones, kitchens, and modern facades. It remains dimensionally stable between -100 °C / +80 °C and meets B2 fire safety requirements. Installation must be carried out using continuous lines of polyurethane assembly adhesive on all mounting surfaces alongside mechanical screw anchors; silicone adhesives are strictly forbidden. Joint seams and countersunk screw heads should be filled with acrylic putty and sanded flush using 180-220 grit sandpaper. Factory coated with a smooth white acrylic primer, it accepts any high-grade water-based or synthetic topcoat indoors, or UV-resistant exterior paint outdoors.
Frequently Asked Questions
What material is used in Polure Modern Architectural Molding?
Polure Modern Architectural Molding is manufactured from high-density rigid polyurethane (150-220 kg/m³), combining wood-like impact resistance with low weight.
Is Polure Modern Architectural Molding suitable for high-humidity areas?
Yes, with water absorption under 1%, it will not rot, swell, or mold in bathrooms, kitchens, or outdoor environments.
How is Polure Modern Architectural Molding installed?
Apply continuous polyurethane assembly adhesive to contact edges and reinforce with screws. Silicone is forbidden. Fill joints and sand smooth.
Does Polure Modern Architectural Molding come pre-primed?
Yes, it arrives factory pre-primed with a smooth white acrylic primer ready for water-based, synthetic, or exterior UV-resistant paints.