Lightweight Ceiling Rose
Polure lightweight ceiling roses deliver high-definition relief and classic architectural charm without putting structural strain on ceilings or drywall. Manufactured from rigid polyurethane with a high density of 150-220 kg/m³ (production target ~160 kg/m³), these decorative roses rival heavy plaster in detail while remaining exceptionally easy to handle for a single installer. The closed-cell polymer composition prevents water absorption above 1%, eliminating risks of swelling, cracking, rot, or mold growth in humid spaces. Designed to resist temperature shifts between -100 °C / +80 °C, the product meets Class B2 fire safety standards. Supplied pre-primed with factory white acrylic coating, it is ready for paint customisation. Installation requires applying continuous lines of polyurethane assembly adhesive on rear edges, anchoring with countersunk screws, filling holes with acrylic spackle, sanding with 180-220 grit paper, and applying finish paint.
Frequently Asked Questions
What density material is used in Polure lightweight ceiling roses?
Polure lightweight ceiling roses are made from high-density rigid polyurethane (150-220 kg/m³), offering high strength at low weight.
Is a lightweight ceiling rose suitable for humid rooms?
Yes, with water absorption below 1%, closed-cell polyurethane will not rot, swell, or mold in humid bathrooms or kitchens.
How is a lightweight ceiling rose installed?
Apply continuous polyurethane assembly adhesive, fix with mechanical screws, fill screw holes with acrylic putty, sand with 180-220 grit, and paint.
Can silicone adhesive be used for fitting a lightweight ceiling rose?
No, silicone adhesive is strictly prohibited because it lacks holding capacity. Always use polyurethane assembly adhesive and screws.
What paint should be applied to a lightweight ceiling rose?
Lightly sand the factory white acrylic primer with 180-220 grit paper, then apply two coats of water-based or synthetic paint.